A Complete Guide to Starting DIY and Power Tools 2026 — First Tools, Wood, Painting, and Rental DIY
Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.
What trips up DIY beginners is not skill but the first move
When you try to start DIY and find yourself stuck, the reason is usually not technique. "I don't know what to buy," "I gave up because I rent," "I'm afraid I'll fail and damage the room" — in other words, you are tripping over the decision before the work, not the work itself. Put differently, once you sort this part out, jobs like building a shelf, fixing a wobbly piece of furniture, or changing the color of a wall go much more smoothly than you'd expect.
This guide is not a shopping list for buying every tool in sight. It is a map for working backward from what you want to do now and finding the shortest route to just the tools you need. From assembly and repairs to building with wood, painting, and replacing wallpaper, we go genre by genre through where people get stuck and what gets you past it. For deeper dives into individual tools and genres, the text links to dedicated articles.
There is only one thing to remember at the start: "buy everything first, then begin" is the longest way around. Pick one thing you want to do and add only the tools it requires. Done in this order, you won't leave unused tools sleeping in a closet, and you won't spend your whole budget at once.
How far can DIY go? A difficulty-to-tools chart
"DIY" covers a wide range, from jobs finished with a single screwdriver to serious projects with power tools and lumber. If you first place what you want to do on the ladder, the tools and the commitment it needs become clear. The table below lines up, genre by genre, what you can do, the main tools, and the difficulty.
| Genre | What you can do | Main tools | Difficulty |
|---|---|---|---|
| Assembly and repairs | Assembling store-bought furniture, fixing wobbles and loose screws, installing shelves | Tool set, cordless screwdriver | Easy |
| Using your walls | Fixing hooks and shelves to the wall, building display shelves | Stud finder, cordless screwdriver, measuring tools | Easy to medium |
| Building with wood | Original shelves, small items, simple furniture | Saw / circular saw, power drill, lumber, screws | Medium |
| Painting and recoloring | Recoloring furniture and small items, protecting wood, refreshing the mood | Water-based / oil-based paint, brush, roller, masking materials | Medium |
| Wallpaper and interiors | Changing the look of a wall, repairing scratches and stains, restore-to-original DIY for rentals | Wallpaper, trimming spatula, smoothing brush, utility knife | Medium |
Looking at the table, you can see that the higher up, the more you can start with extensions of tools you already own, and the further down, the more special tools and planning you need. For your first step, start without hesitation from the "Easy" row. Get used to the tools and the feel of the work with assembly and repairs, then branch out to wood and painting, and you'll be less likely to give up.
If you are choosing your first tool, make it a driver
If you had to name just one tool that does the most at the start of DIY, it is a tool that turns screws. Assembling furniture, fixing shelves, retightening wobbly parts — all of it is, in the end, a collection of jobs that come down to turning many screws accurately. This is where many people stop, over the difference between a cordless screwdriver, an impact driver, and a power drill. The names are similar and they look alike, so it's no wonder.
Cordless screwdriver vs. impact driver vs. power drill
| Tool | What it does well | Who it suits |
|---|---|---|
| Cordless screwdriver (drill driver) | Drives screws and drills holes quietly; torque adjustment prevents overtightening | Beginners focused on assembly. Ideal as a first tool |
| Impact driver | Adds impact to drive long screws into hard material with force | People building furniture from lumber or doing heavier work like wood decks |
| Power drill | Specialized for drilling. Torque adjustment for screwdriving is weaker | People whose main job is drilling holes |
To get straight to the conclusion: if your work is mostly assembly and repairs, your first tool is a cordless screwdriver with torque adjustment. The machine prevents the mistake of overtightening and crushing the screw hole. Once you start using lots of screws in woodwork, adding an impact driver as your second tool speeds up the work dramatically. The finer points of choosing — rotation speed, number of torque settings, chuck size — are covered in How to choose a cordless screwdriver or impact driver.
So is one cordless screwdriver all you need? No. Without tools for measuring and marking before you drive anything, you will inevitably end up with things that aren't straight or sizes that don't fit. A tape measure, a carpenter's square, and a pencil — these three plain items decide how the result looks. The other basic hand tools besides drivers come bundled in a household tool set, so it makes a no-waste first kit. As you want to make more and need sanding and cutting, adding power tools one at a time for each purpose is the natural flow. Choosing cordless means you are not tied to a cord and can work easily even in the limited workspace of a rental.
Drill driver or impact driver, and how high to go on voltage
Even once you've decided to start with a driver, standing in the store you see similar-looking machines lined up in a row, and you freeze again. Here we take up only the combinations people actually find confusing side by side, and sort out by conditions which suits whom. Rather than memorizing catalog terms first, it's faster to decide "which side my kind of work falls on."
Tighten by rotation alone, or push through with impact
A drill driver tightens screws by rotational force alone. The numbered ring near the front is the clutch; when the set strength is reached, it clicks and spins freely and tightens no further. With thin boards, soft glued laminated lumber, or furniture hardware — cases where overtightening crushes the wood and actually weakens the hold — that free spinning acts as insurance. It also has a chuck (the part that grips the bit with jaws), so it can hold round-shank drill bits that are not hex-shank as well.
An impact driver applies continuous blows from an internal hammer in the direction of rotation when the load rises. With a rattling sound, even long screws go in without stalling, and cam-out, where the bit slips off the screw head, is less likely. For assembling 2×4 lumber, or for long screws that pass through plasterboard to reach the studs behind it, this one is clearly easier. On the other hand, tightening is judged almost entirely by hand and ear, and with thin material you can overtighten without noticing and split it. The impact noise also carries a lot, so it doesn't suit using it briefly at night in an apartment building.
A commonly overlooked difference is the type of bit each can hold. An impact driver accepts only bits with a hex shank (6.35mm across flats). Pilot bits for woodworking and metal drill bits are also available with hex shanks, but the selection is narrower than with round shanks, and large hole saws and long wood drill bits are mainly round-shank. If your work involves a lot of drilling, a drill driver; if the number and length of screws is the main thing, an impact driver — that dividing line is close to what it feels like in practice.
| What you want to do | Better suited | Reason |
|---|---|---|
| Assembling furniture, curtain rails, shelf brackets | Drill driver | The clutch can stop overtightening |
| Drilling pilot holes and dowel holes, using round-shank bits | Drill driver | The chuck can also grip round shanks |
| Assembling 2×4 lumber, dozens of long screws | Impact driver | Impact keeps it from stalling and is easier on your arm |
| Wood decks, sheds, outdoor framing | Impact driver | Less cam-out with hard material and long screws |
| Finishing quietly at night or early morning | Drill driver | No impact noise |
| Lots of one-handed work on a stepladder | Lightweight-class impact driver | Tightens quickly, and your posture is less likely to break |
Is a palm-sized one enough, or do you step up the voltage class?
The next worry is size. Pen-type machines that run on dry-cell batteries or a small built-in battery work well enough for jobs that save you the effort of turning a screwdriver, such as screws in assembled furniture, outlet plates, and fixing a wobbly chair. But don't expect the force to drive screws into wood, and drilling pilot holes is a struggle too. If that's going to be your main use, moving up to a class with a removable battery ends up cheaper.
The center of DIY is a choice between the 10.8V class (sometimes labeled 12Vmax) and the 14.4V–18V class. The 10.8V class has a light body and is easy to get into tight places such as under the sink or inside a shelf, and handles building shelves, drilling pilot holes, and attaching hardware without strain. The 18V class drives the same screw in less time and has more battery capacity to spare, so the difference shows up in long outdoor stretches and jobs with many screws. In exchange, the combined weight of body and battery goes straight to your wrist, and it takes more storage space.
Another angle is whether you'll add more later. Circular saws, sanders, blowers, vacuum cleaners, floodlights, and other products from the same maker can share batteries of the same series. If you sense you'll add power tools in the future, matching from the start to the voltage class with a thicker lineup of the tools you want means you won't need two sets of batteries and chargers. Conversely, if you're at the stage where you might build one shelf and be done, starting with a smaller, lighter class keeps the tool from sleeping at the back of a closet.
Cordless or corded: which is less likely to bring regret?
Corded (AC power) is still a living option. Batteries are consumables that degrade little by little even when unused, so if you touch the tool only a few times a year, you tend to find the charge empty when you take it out, or that it won't hold a charge after a while. A corded tool gives full power whenever you plug it in, and in the same performance class its price range tends to be lower. It also suits uses where it runs for long stretches, such as mixing paint or wall materials, or drilling holes with a large-diameter bit.
On the other hand, a cord gets in the way more than you'd think. On a stepladder, behind furniture, on a balcony, or around an outdoor shed, handling an extension cord eats time and is also a source of accidents from stepping on or catching it. For DIY, where installation jobs are scattered around the house, the light footwork of cordless tells directly in how the work goes. A practical dividing line is this: if you'll use it even once a month, cordless; if it will sleep in a closet for years, corded.
Rent it instead of buying, or have it cut for you
What you compare need not be tools against tools. Many home improvement stores offer tool rental, and machines you'd use only a few times in a lifetime — circular saws, pressure washers, demolition hammers — can be handled this way. Conversely, rental is a poor fit for work whose date might slip. Being chased by the return time puts pressure on you: you can't pause for rain, and you can't redo something halfway. Also note that consumables such as blades and sandpaper are often expected to be your own.
And for the circular saw, there is a third path: neither buy nor rent. If you hand your dimensions to a lumber cutting service and have it cut for you, the accuracy of straight cuts is steadier than cutting by yourself. With many cuts the fees add up to a fair amount, but considering the trouble and danger of getting the saw body, blades, guide, and protective gear, this makes more sense in the early stage. Deciding whether to buy a circular saw can wait until the time spent waiting for cuts and hauling lumber starts to feel like a chore.
Power tools come as sets that include a battery and charger, or as "body only" models. Body only looks lower in price range, but if you buy one without a compatible battery, you can't run it. Think of it as an option for when you add more tools of the same series as a second or later purchase.
Find the studs before you fix anything to a wall
Fixing shelves, hooks, or a TV mount to a wall is among the most satisfying jobs in DIY, and also where failures are most visible. The reason is clear: screws driven straight into plasterboard don't hold. Most walls in Japanese homes are plasterboard, which looks hard on the surface but is hollow inside. If you hold something heavy up with screws alone, it will eventually pull out.
The reliable way is to aim the screws at the posts and studs (the framing) behind the board. Framing members are usually spaced roughly 30–45cm apart, and you can find their position with a stud finder (a wall-behind detector). Where there is no framing, a plasterboard anchor (hardware that opens inside and catches) can hold light items. Heavy items on framing, light items on anchors — just remembering this division of use raises your success rate on wall projects dramatically.
If you rent and don't want to make holes in the wall, there are wall hooks with thin pins whose marks are less conspicuous, removable adhesive hooks, and racks that brace between floor and ceiling. Tools exist that let you both use the wall and restore the unit to its original condition, so look over the options before giving up on your lease.
Building with wood — the real problem is the cutting
Making shelves and small items from wood is the royal road of DIY, and the satisfaction of finishing is exceptional. But the reason beginners stop here boils down to nearly one thing: they can't cut straight. Sawing by hand tends to leave a slanted cut face, causing wobble and gaps.
The trick that solves this all at once is a home improvement store's cutting service. Bring the dimensions from your plan and they will cut accurately with a machine (a guideline is a few dozen yen per cut; it varies by store). At home you only assemble, fasten, and finish, so noise and sawdust are minimal. It also works well for rental DIY, which is another advantage of this method. Choosing the kind of wood (the differences among SPF lumber, pine, and plywood), choosing screws, and how to proceed as a beginner are summarized in How to start woodworking DIY.
Another way of thinking that is also practical is not to build everything from scratch but to combine store-bought pieces and your own work. Use a store-bought shelf or shelving unit for the frame and customize only the top board and doors with lumber, and you can secure strength while bringing it closer to your taste. Not insisting on "all DIY" often turns out to make furniture that lasts longer.
What to decide in advance for woodworking DIY
- Measure the finished size in actual dimensionsMeasure the width, depth, and height of where it will go and put them in the plan. If this is off, everything is off.
- Decide the material and thicknessPine for furniture that shows, plywood for strength, and so on. Choose by use.
- Decide where the cutting will be doneCut at home, or have the home improvement store cut it. If you rent, bringing it in is easier.
- Choose the assembly methodScrews, or dowels and hardware? With a cordless screwdriver, both accuracy and speed go up.
Painting — nine-tenths of the result is decided before you paint
Just changing the color of furniture or small items changes the feel of a room surprisingly. And painting has a low tool barrier: you can start with a brush, a roller, paint, and masking materials. Yet failures like "it came out streaky" and "it ran and dripped" never stop. Most of the cause is not painting technique but skipping the prep work of surface preparation and masking.
Before painting, wipe off dirt and oil from the surface, and if needed sand it to give the paint something to grip. Surround the area with masking tape and protective sheeting. Whether you do this one extra step or not makes the result a different thing. The tip for the painting stage is not to lay it on thick in one go but to build thin layers. Applying two coats while waiting for drying ends up cleaner and faster.
Water-based or oil-based: which to choose?
What a beginner should pick up first is water-based paint. The smell is mild, brushes and rollers wash out with water, so cleanup is easy, and it is easy to handle indoors or in a rental. Oil-based, on the other hand, excels in durability and adhesion and shows its strength in harsh places like outdoor wood and metal, but it needs thinner and requires careful ventilation. As a rule of thumb: water-based for indoor furniture makeovers, oil-based for outdoors and hard-use parts. Choosing by paint type and tips for painting cleanly are covered in detail in How to choose DIY paint.
Painting is fun, but it gives off the smell of volatile components and dust. Open the windows and run the exhaust fan; ventilation that seems like overdoing it is just right. Having a mask and gloves on hand lets you keep working in a way that is kinder to your body.
You can do it in a rental too — choosing tools on the premise of restoring the original condition
Many people are convinced that "DIY is impossible because I rent," but in fact if you choose methods that can be restored to the original condition, what you can do is quite broad. The key is three ideas: "stick it and peel it off," "just set it down," and "brace it in place." With these as the axis, you can remake your room within a range you can return to the original when you move out.
For changing a wall's look, removable wallpaper and sticker types are the main players. With low-tack products made specifically for rentals, the surface underneath is less likely to be damaged, and they can be peeled off when you move. When applying, the tip is to use a trimming spatula and a smoothing brush to push out the air while lining up the edges cleanly. Differences between wallpaper types, tricks that work in rentals, and the steps for applying cleanly are summarized in How to start wallpaper DIY.
Beyond wallpaper, combining removable flooring, freestanding furniture, and tension-pole racks can change the atmosphere of the whole space. How to choose projects and items, tricks specific to rentals, and how to avoid common failures are introduced concretely in Interior DIY.
What DIY is allowed varies greatly by lease. Before work that could affect the surface underneath, such as replacing wallpaper or fixing shelves, it's reassuring to check the contract or have a word with the management company. With both "choosing tools that can be peeled off" and "checking beforehand" working together, you can enjoy it without trouble.
Avoid safety problems and "common failures" all at once
The most wasteful thing in DIY is to come to hate the work because of an injury or illness. You don't need difficult techniques, but please don't skip the minimum safety measures.
When cutting, sanding, or drilling, wear safety glasses and gloves. When using paint or adhesive, ventilate well. Read the manual for power tools and keep your hands away from blades and rotating parts. Store blades and tools where children and pets can't reach them. Working in an awkward posture or on a stepladder is a cause of falls. If you feel any danger at all, stop, and the judgment to leave work that feels too hard to a professional is a worthy part of DIY too.
After tools and safety, the next thing to watch for is the patterns of failure that beginners repeat. The four below are all things you can avoid just by knowing about them.
| Common failure | Why it happens | How to avoid it |
|---|---|---|
| Buying too many tools | Buying "for someday" and ending up letting them sleep | Decide what you want to do and add only the tools you need, one at a time |
| Measuring mistakes, so sizes don't fit | Going by feel without measuring / measuring only once | Check "measure and mark" twice. Keep it in the plan |
| Missing the wall framing and can't fix things | Driving screws straight into plasterboard | Find the studs with a stud finder / use anchors where appropriate |
| Can't restore the rental to its original condition | Using materials that can't be peeled off or strong adhesives | Choose tools meant to be "stick and peel," and check the lease beforehand |
Measurements and standards to check before buying, to avoid "it won't fit" and "it won't hold"
A surprisingly common cause of DIY failure is a "standard mismatch" unrelated to skill. The bit won't be gripped, the battery won't plug in, the screw doesn't reach the framing, the board won't fit in the car. All of these could have been avoided by checking one number before buying. Here we list the check points where people actually get snagged, in the order of tools, framing, materials, and room.
Bit and drill shanks — the 6.35mm hex shank and chuck diameter
The tip of an impact driver is a hex sleeve, and only a hex shank of 6.35mm (1/4 inch) across flats fits. Bits marked "impact compatible" in the store follow this standard. Most drill drivers have a keyless chuck that can grip both hex and round shanks, but there is a maximum diameter it can grip. A drill bit with a 13mm shank will not go into a model with a 10mm chuck. The shank diameter is always written on the bit's package, so compare it with the chuck diameter of the model you own before choosing.
The trick is to judge by the thickness of the shank, not the diameter of the hole. Even among large-diameter wood drill bits and hole saws, some have only the shank machined thinner and fit a small chuck. Conversely, a bit with a small diameter but a thick straight shank may not fit.
Concrete and plasterboard call for different drilling tools
If you choose a driver on the premise of drilling only wood, you'll later hit concrete or mortar and get stuck. To drill into concrete, you need a hammer drill that rotates while striking finely back and forth, or a more serious rotary hammer. Most rotary hammers use a dedicated shank standard called SDS-plus, so hex-shank or round-shank bits cannot be attached as they are. Conversely, you cannot put an SDS-plus bit into an ordinary drill driver either.
Drilling into a wall that is plasterboard alone is easy, but screws won't hold there. When using plasterboard anchors, each anchor has a specified "applicable board thickness." Typical interior plasterboard is 9.5mm or 12.5mm, but some anchors are made only for 12.5mm. You can't tell by how the wall feels when you knock; remove an outlet plate and look at the cross-section to confirm the thickness.
"The same maker" is not enough for batteries
Even from the same maker, batteries can't be shared if the voltage series differs. The shape of the insertion part and the arrangement of the terminals differ, and they are built so they physically won't go in. Even at the same voltage, the slide section for older nickel-cadmium and nickel-metal hydride batteries and the one for current lithium-ion may not be compatible. When buying a second tool, check both the voltage marking on the model number and the list of compatible battery model numbers. Chargers also have compatibility tables, and some combinations take longer to charge with a high-capacity battery or are not supported at all.
Overall length and head height — will it fit in tight spots?
What often matters in installation work is the dimension from the tip to the grip. Many impact drivers are designed with a short head, which helps in tight places such as under the sink, behind a vanity, or inside furniture. A drill driver has a longer head because of the chuck, so in the same place it may be "2cm short of fitting." If working in tight spaces is your main purpose, look at the overall length in the catalog (the dimension from the tip) and match it against the depth of the place where you actually want to use it. There is also the approach of working out dimensions on the premise of adding a short bit holder or a corner attachment instead of gripping the bit directly.
Decide screw length by addition
When you attach a shelf to a wall, work out the screw length not by feel but by addition: "thickness of the thing you're fixing (such as a shelf bracket) + thickness of the plasterboard + the length you want to bite into the framing." If the part that bites into the framing is short, it looks attached but pulls out the moment you put a load on it. Wooden framing studs are often spaced at 455mm or 303mm, so the basic approach is to find the center of the post by locating the framing and drive the screw into that center. If you graze the edge of the post, it seems to hold but doesn't.
Conversely, screws that are too long are also dangerous. Wiring and pipes sometimes run inside the wall, and there is no reason to go deeper than necessary. The same goes for ceiling mounting: figure out the position and thickness of the framing before deciding the length.
Nominal vs. actual lumber sizes, and the length you can take home
Lumber labels don't match actual size. The actual size of a 2×4 is about 38×89mm, and a 1×4 is about 19×89mm. If you draw the plan with nominal sizes, you'll be off by tens of millimeters when assembled. Lengths are also sold in standard lengths such as 6 feet = about 1820mm and 8 feet = about 2440mm, so calculating in advance how many pieces you can get from the dimensions you need reduces waste. The standard plywood sheet, the so-called sanroku board, is 910×1820mm, and it will not fit in an ordinary passenger car as it is.
Transport is the most important thing to check in advance. Measure the diagonal length of the cargo space with the rear seats folded, and if it won't fit, draw up the plans on the premise of having the store cut it. Cutting services are basically straight and square cuts, and each cut loses a few millimeters of blade thickness. When taking several parts from the same board, handing over a dimension list that allows for this blade thickness and a "waste margin" gives a consistent finish. Lumber warps and bends, so when buying, sight along from the end grain and choose pieces with little warp, and assembly becomes far easier.
A tension-pole post in a rental depends on the ceiling height and what's inside the ceiling
The method of standing a post with 2×4 lumber and a dedicated adjuster has clear conditions of use. First measure the ceiling height, and cut the lumber to the length left after subtracting the dimension specified for each product. If you get this subtraction wrong, it will either not brace tightly or not fit in at all. Ceiling height can differ by a few millimeters even within a room, so measure at the position where you want to stand the post.
Another important thing is what is on the ceiling side. If you brace with strong force against a part that is plasterboard alone, the board dents or a mark remains. The principle is to find the position of the framing and have the load rest there. Hanging beams, ceiling moldings, and the position of air intakes also constrain where you can stand the post. The height and width at which you span shelves are also more reliable if you put them on a measured plan of the room before standing the post, rather than re-measuring afterward.
Always check the "applicable surface" marking on paint. Paints for wood, for iron, for concrete, and for vinyl wallpaper are all different, and if the surface doesn't match, it peels after drying. For outdoor use, an outdoor-use marking is also required. The cleaning of thinner and brushes also differs between water-based and oil-based.
- Note the specs of the machine you ownJot down the voltage, battery model number, and chuck diameter (or the impact driver's hex sleeve), and you won't hesitate over bits and attachments in the store.
- Check the framing and thickness where you'll installConfirm the position and spacing of the framing and the board thickness, and decide the screw length and the anchor's applicable board thickness.
- Measure the dimensions of your workspaceMeasure whether the tool's head will fit, whether you can set up lumber and cut it, and whether there is floor area to lay masking materials.
- Reflect the actual size and standard lengths of the materials in the planDraw the plan in actual sizes rather than nominal ones, and allow for the blade thickness of cuts and waste margins.
- Check the transport routeThe car's cargo space, the elevator, the entrance door, the corners of the hallway. Long items get stuck here.
FAQ
What should a DIY beginner really buy first?
To start, two things are enough: a tool set that bundles basic hand tools and a cordless screwdriver with torque adjustment. With just these you can handle many jobs, such as assembling furniture, repairing wobbles, and installing light shelves. Also have a tape measure and carpenter's square for measuring and a pencil for marking, and the results will be more consistent. You don't need to collect several power tools from the start; deciding what you want to do and then adding them one at a time is the order that wastes nothing.
Cordless screwdriver or impact driver: which should I buy first?
For a first tool mainly for assembly and repairs, we recommend a cordless screwdriver (drill driver) with torque adjustment. The machine prevents the mistake of overtightening and crushing the screw hole, and it is relatively quiet, so it is easy to use in an apartment building. An impact driver can drive long screws into hard material with force through impact, so it comes into its own as a second tool once you start building furniture from lumber in earnest. Be aware that starting with an impact driver alone makes it easy to overtighten in delicate work.
I want to attach a shelf or hook to the wall, but the screws keep coming out.
Most walls in Japanese homes are plasterboard; the surface is hard but the inside is hollow, so screws alone don't hold. For heavy items, the reliable way is to use a stud finder to locate the posts behind (the framing, spaced roughly 30–45cm apart) and drive the screws into them. Where there is no framing, plasterboard anchors that open inside and catch can fix light items. Remember the division of use — framing for heavy items, anchors for light ones — and failures drop sharply. If you rent and want to avoid holes, removable adhesive hooks and tension-type racks are options too.
I can't cut wood straight. Is there a good way?
A hand saw tends to leave a slanted cut face and is the step where beginners stumble most. The easiest solution is to bring your dimensions to a home improvement store's cutting service and have them cut by machine (a guideline is a few dozen yen per cut; it differs by store). At home you only assemble and finish, and noise and sawdust stay minimal, so it also suits a rental. If you cut it yourself, using a circular saw with a straight guide improves accuracy.
I want to repaint furniture. Any tips for painting it evenly and cleanly?
The result is largely decided by the preparation before painting. Wipe off dirt and oil from the surface, sand it if needed so the paint grips, surround the area with masking tape and protective sheeting, and then start painting. Don't apply paint thickly at once; apply it thin, let it dry, and finish with a second coat, and it won't be streaky. For beginners, water-based paint, which has a mild smell and washes out with water, is easier to handle and suits indoor work. For harsh places such as outdoor wood and metal, durable oil-based paint is the better fit.
What kinds of DIY can I do in a rental?
If you choose methods that can be restored to the original condition, you can enjoy a wide range even in a rental. The trick is to choose around "stick and peel," "just set it down," and "brace it in place": removable wallpaper or sticker types for walls, removable flooring for floors, freestanding furniture and tension-pole racks for storage. Since you can return it to the original when you move out, you can try things with peace of mind. However, what DIY is allowed varies by lease, so before work that could affect the surface underneath, we recommend checking the contract or consulting the management company.
What are the minimum safety measures to take for DIY?
Wear safety glasses and gloves when cutting, sanding, or drilling, and ventilate well when using paint or adhesive. Read the manual for power tools and keep your hands away from blades and rotating parts. Store blades and tools where children and pets can't reach them. Working on a stepladder or in an awkward posture leads to falls, so avoid it and find ways such as having two people steady it. If you feel any danger at all, stop, and the judgment to ask a professional for work that feels too hard rather than forcing it is important too.
How should I store the batteries of power tools I won't use for a while?
Lithium-ion batteries degrade faster if left for a long time fully charged or fully empty. The safe approach is to charge them to about half, remove them from the tool, avoid direct sunlight and hot car interiors, and keep them indoors. Check the remaining charge every few months, and if it has dropped, top it up a little, which reduces the chance that the tool won't run when you need it.
What causes the screw head to get stripped so the bit spins in place?
Most cases come from not pressing hard enough and from a size mismatch between the bit and the screw head. A Phillips bit of No.2 is standard, but No.1 may fit small screws. Think of pressing straight and firmly before turning, and don't tilt the bit off the axis. A worn-tip bit slips easily, so treat it as a consumable and replace it to be sure.
* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.