How to Choose a TV Stand: Size, Load Capacity, and Tip-Over Safety
Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.
Is a TV stand furniture or a mounting fixture? Decide its role first
Many people who struggle to choose a TV stand start by asking, "Do I like the design?" But a modern TV over 50 inches weighs around 15kg on its own, and a 65-inch set can reach 25kg, so the stand is also the base that carries heavy precision equipment. In other words, a TV stand has two faces at once: furniture, which handles storage and looks, and a mounting fixture, which keeps the TV from tipping over. Which face you lean toward changes the type you should pick and the numbers you should check.
For example, if you sit on the floor in a studio apartment, the stand's looks and the open feel of a low unit matter most. But if you place a large TV against a bedroom wall, the safety of the supporting side, meaning load capacity and tip-over protection, takes center stage over furniture appeal. Using this "furniture-leaning or fixture-leaning" axis, this article walks through how to choose stand width for your TV size, the two numbers of load capacity and VESA, how to organize cables and a soundbar, accidents that tend to happen during delivery and assembly, and finally earthquake and child safety. Prices and discount rates change with the season and the store, so we focus on how to choose; please check each online shop or store listing for specific amounts.
There are only three things to check first. (1) The TV's size, its actual width, and its weight (always listed in the catalog or on the manufacturer's site). (2) Who watches, and in what position (floor / sofa / chair / bed). (3) Whether you rent. Once these three are settled, the type, width, and load-capacity target narrow down naturally.
What the 5 types are really like: which suit renters, earthquakes, and future TV upgrades
TV stands fall into 5 broad types by height and installation method. Beyond the one-line descriptions in a catalog, we also cover how well each suits real life once you live with it.
| Type | In practice | Best for |
|---|---|---|
| Low type (floor-standing) | The top is low, so the room looks larger. The standard choice, with eye level lining up easily when watching from the floor or sofa | Living rooms and studios in general |
| High type | The top is higher, so you can watch from a chair or bed without looking up. Storage space is also generous | Dining-room use and bedroom viewing |
| Corner type | Fits diagonally into a room corner and saves space. However, because the corner is left open, cables tend to run longer | Making use of a corner to free up floor space |
| Wall-side stand | Gives a "wall-mounted look" without drilling holes in the wall. It stands on a pole, so separate tip-over protection is needed | Renters, or those who plan to rearrange |
| Wall mount (fixed to the wall) | The cleanest look, but it depends on the wall's backing and the VESA standard. Cannot be restored to original condition | Homeowners and minimalists |
The deciding point is surprisingly simple. For watching from the floor or sofa, choose low; for a chair or bed, choose high. This is because your neck tires less when the center of the screen is level with your eyes or slightly below. A large screen on a low stand in the bedroom means looking up every night, which is more tiring than you would expect. If you rent and cannot drill into the wall, a wall-side stand, which also stands on its own as furniture, is the realistic answer. It looks close to a wall mount, yet needs no repair when you move out. Note, however, that a wall-side stand stands on a single pole, so it sways back and forth in an earthquake. Treat the fixing measures described later as mandatory.
Another easily overlooked point is future upgrades. People tend to move up to a somewhat larger TV every few years, and buying a new stand each time is wasteful. If you choose a low or high type with an extendable width, or leave enough load capacity and width to carry a TV one size larger than your current one, you can keep using the same stand at your next upgrade.
Stand width = TV width plus side margins; decide viewing distance by measuring
The most common mistake with stand width is "I chose by inch size, and the width did not fit." Check TV width by actual size (mm), not by inches, and add some room on each side. Below are approximate TV widths and the stand-width range that gives both good looks and stability (all are guidelines).
| TV size | Approx. TV width | Stand width guide | Margin on each side |
|---|---|---|---|
| Around 40 inches | About 90cm | Around 120cm | Around 15cm per side |
| Around 50 inches | About 110cm | 140 to 160cm | 15 to 25cm per side |
| Around 55 inches | About 120cm | 150 to 180cm | 15 to 30cm per side |
| Around 65 inches | About 145cm | 180 to 200cm | 18 to 28cm per side |
There are two reasons for leaving margins: the look is better balanced, and the legs of the stand or the TV's feet are more likely to fit within the TV's width. In particular, a TV with two legs placed near both ends will not fit if the distance between the legs exceeds the stand width. Measure both "the distance between the TV's legs" and "the usable width of the stand's top" before installing, and you can reliably avoid this problem. With a stand that has an integrated pole you need not worry about legs, but then you should check whether the TV's mounting holes (VESA) match.
A common rule of thumb for viewing distance is 1.5 to 3 times the screen height, but on a high-resolution 4K panel the roughness is less noticeable up close, so you can comfortably sit closer than in the past. What matters more than a formula is measuring: use a tape measure to find the distance from your sofa or bed to where the TV will sit, and imagine whether the screen fits comfortably in your field of view. It is enough to avoid both extremes: so close that you look up, or so far that text is hard to read.
Load capacity and VESA: misreading these numbers is the most dangerous mistake
The one number on a TV stand that you must not compromise on is load capacity. If you take it lightly, in the worst case the TV falls or the stand warps. The key is to think not about the TV alone but about the total weight of everything you put on it.
- Estimate the total: add up the TV, recorder, game console, soundbar, router, and so on, and choose a load capacity with plenty of margin. Avoid cutting it close.
- The top panel and shelves are different: even if the top's capacity is high, the internal shelves may be rated lower. When loading a heavy recorder onto a shelf, check the shelf's figure too.
- For wall-side stands and wall mounts, always check the supported inch sizes and weight: each product has an upper limit, such as "fits 32 to 65 inches / up to 40kg." Confirm that your TV falls within that range.
When choosing a wall-side stand or wall-mount bracket, you will meet the VESA standard. This is a common standard for the spacing of the screw holes on the back of a TV, shown in numbers like 200×200, 400×400, or 600×400 (mm). If the VESA the stand or bracket supports does not match the VESA on your TV's back, it cannot be attached. It is always listed in the manufacturer's spec sheet, so before buying, note both "the TV's VESA" and "the stand's supported VESA" and compare them.
Even if the VESA matches, it is dangerous if the TV exceeds the supported weight. VESA (hole position) and load capacity (the weight it can bear) are separate conditions, so think of installation as possible only when both are satisfied. TVs with a curved back or slim models designed for a dedicated stand may not be compatible with off-the-shelf brackets, in which case also consider the manufacturer's genuine option.
Wall-side stands, low boards, and wall-mount brackets: the same "placing a TV," but different design ideas
When you look for a TV stand, you inevitably reach a fork: "a wall-side stand, or a conventional low board?" As you go further, another option appears: "why not just use a wall-mount bracket?" These three seem to serve similar purposes, but how they support the TV and what they leave behind in the room are completely different.
How it supports the TV decides who it suits
A low board has the TV "sitting" on the top of a box-shaped piece of furniture. The center of gravity is low, and the TV stands on its own legs. A wall-side stand, by contrast, fixes the TV to a pole through the VESA holes and supports the pole with a base plate, so the TV's weight is concentrated on a single vertical pole. A wall-mount bracket puts all the load on the wall's backing, so the position and strength of the backing decide whether installation is possible at all.
| Comparison point | Low board (freestanding) | Wall-side stand | Wall-mount bracket |
| Fixing the TV | Simply sits on its legs (separate fixing recommended) | Screwed to the VESA holes | Screwed to the VESA holes |
| Holes in the wall | Not needed (except when fixing to the wall for tip-over protection) | Not needed for many products | Required. Depends on the backing position |
| Storage | High. Models with drawers or doors are available | Thin shelves, kept to a minimum | None. A separate stand is needed |
| Height adjustment | Fixed. Only the height of the TV's legs | Many products adjust in steps along the pole | Set by the bracket position. Hard to change later |
| Rearranging | Heavy but movable | Relatively easy to move | Effectively fixed |
Sorting by conditions gives the following
If you keep three or more recorders or game consoles, or want to hide discs and cables, a low board is the natural choice. The shelves of a wall-side stand are shallow, and their load capacity is often only a few kilograms per shelf, so they run short as equipment grows.
If you rent and cannot drill into the wall but want something close to a wall-mounted look, a wall-side stand is a strong candidate. Because the TV is fixed to the stand by VESA, the worry of the TV tipping on its own is structurally reduced, which is a practical advantage. However, the base plate sits on the floor, so it affects the path of a vacuum cleaner or robot vacuum.
If you want to free up as much floor as possible, or place the TV higher, a wall-mount bracket is the choice, but it basically cannot be attached to a wall made only of plasterboard. You decide after locating the studs to confirm the backing position and checking the restoration conditions with your property manager.
High type: the fourth option
If you watch from a bed or a dining chair, a high-type stand or high board, which raises the line of sight, is also a candidate. A low board suits those who watch from a sofa; a taller product suits those who spend most of their time on high chairs. Working backward from your viewing posture makes the decision easier.
A wall-side stand is designed on the premise that it is "placed against a wall." If you put it in the middle of a room as a divider, its appearance from behind and its stability can be unexpected. It is reassuring to check in the product description whether the back is finished and whether double-sided placement is supported.
Plan equipment storage, cables, and the soundbar's place together
The area around a TV is where equipment other than the TV and many cables gather. If you notice after choosing the stand that "the equipment does not fit" or "the cables do not reach," there is little you can do, so the trick is to design storage and cabling at the same time as choosing the stand. Let us look at storage first.
- Measure the number and size of your equipment: check that your recorder and game console (a home console in particular is deep) fit the width, height, and depth of the stand's storage space. If the front has a hinged door, also check the gap for heat dissipation.
- Secure ventilation: recorders and amplifiers get hot, and cramming them into a closed shelf traps the heat. A stand with an open back or a ventilated shelf is safer.
- Decide the soundbar's place first: if it goes right in front of the TV, check that its height does not interfere with the screen's lower edge or the legs. If it goes on the stand's upper level, measure whether the soundbar's width and height fit on the top. Some wall-side stands can take a dedicated shelf.
Cabling has the biggest effect on how the room looks. The following ideas reduce both clutter and the difficulty of cleaning at the same time.
- Choose a stand with cable holes: holes in the top or back panel for cables keep wires from crawling across the surface and tidy them up.
- Keep the power strip inside the stand: simply hiding the strip and adapters inside a shelf greatly reduces the amount of visible cable.
- Bundle cables and bring them to the wall: gather them with cable ties or covers, and move any floor-crossing cables to the wall. This prevents tripping accidents.
- Check the positions of the outlet and antenna terminal first: it is common to place the stand and then find the terminal out of reach. The terminal position can even decide the stand's direction and left-right placement.
Where equipment can be connected wirelessly, going wireless reduces the number of cables in the first place. Power, however, is always required, so settle the outlet position and how to tuck away the power strip first.
Delivery, assembly, and renting: head off problems that happen on site
With a large TV stand, the real test begins after you finish choosing. Troubles such as "it arrived but will not fit into the room" or "it wobbles after assembly" can almost always be prevented by checking beforehand.
Three places where delivery tends to get stuck: the entrance door opening, hallway corners, and interior door width. A one-piece top wider than 180cm can stop right there. Before ordering, measure the narrowest point on the route and compare it with the product's package size (for a self-assembly product, the size of the divided boxes) for peace of mind.
- Measure the delivery route: check that the narrowest point among the entrance, hallway, interior doors, and elevator can be passed. Self-assembly products can often be brought in in parts.
- Whether delivery and assembly services are offered: for large items, the effort differs depending on whether delivery is to the doorstep or into the room. Assembly service may cost extra, so compare by total cost.
- Assemble according to the instructions: forgotten screws or mistakes in order cause wobbling. Always shake it after completion to check for play, and retighten if it loosens with use.
- If you rent, check whether fixing to the wall is allowed: fixing to the wall (wall mounting) requires restoring the wall to its original condition. For rentals, a wall-side stand that does not damage the wall is the safer choice.
If you compare by the total cost including delivery and assembly, differences appear that a comparison of the product price alone would not show. Large items in particular may add delivery and assembly fees, so check the total at the point you put the item in your cart.
Tip-over protection: plan for both earthquakes and children
TVs are heavy, and a fall can lead to a serious accident. Especially now that sets have grown larger, treat tip-over protection not as "nice to do" but as a given. Build your measures around both earthquakes and the behavior of small children.
- Secure the TV itselfConnect the TV to the stand or the wall with an anti-tip strap or fixture. This is the most important measure against the TV falling forward in an earthquake.
- Keep the stand itself stableTall high-type stands and wall-side stands sway back and forth easily. Place heavy equipment on the lower shelf to lower the center of gravity, and fix the stand to the wall if necessary.
- Leave margin in load capacityLoading to the limit causes warping and damage. Choose a load capacity with margin over the total weight of the TV and equipment.
- Anticipate how children moveAssuming children will climb on the TV, pull it, or open doors, consider low-placed equipment, corner protectors, and door locks.
- For wall mounting, check the backingCheck the wall's strength and backing (studs or reinforcement boards), and hire a professional if in doubt. Plasterboard alone cannot support it.
Fixing items are mostly in the range of a few hundred to a few thousand yen, a small expense compared with the TV itself. You can get them at furniture chains or online by searching for "TV anti-tip". Check the screws and straps for looseness not only right after installation but about every six months, and they will work when it counts.
Wrong choices that really happen with TV stands: six things you notice only after buying
TV stand mistakes tend to surface days to weeks after delivery. Right after assembly everything looks fine, but once you place the TV and recorder and connect the cables, you realize "this will not work." Here are the pitfalls specific to this product category.
1. Bought by stand width alone, without measuring the TV's leg spacing
A TV's outer dimensions and the spacing of the legs that actually touch the stand are different things. Recent large TVs divide into those with legs near the left and right edges and those with a single center leg. With two legs near the edges, if the distance between the outsides of the legs exceeds the effective width of the stand's top, it simply will not sit. A single center leg is the opposite: the load concentrates on the center of the top, so watch for sagging in the middle. Measure the leg spacing and the size of the leg footprint with a tape measure before buying to be sure.
2. Opened a drawer or door and it hit the wall or a low table
People check the width and depth of the stand but tend to overlook the space in front needed to open doors. A hinged door swings out by its own width, and a drawer extends past half its depth when fully open. In a room where a low table sits close, you may not be able to open it fully and cannot take out the equipment inside.
3. The back panel is closed and neither cables nor a plug fit through
On products with a fully closed back panel and small or badly placed cable holes, thick HDMI cables or the L-shaped plug of an antenna cable may not pass through. In particular, when the wall outlet ends up behind the stand, the stand cannot sit flush against the wall and sticks out several centimeters more than expected. Check the position of the cutouts on the back and their relation to the height of the wall outlet first.
4. Assumed the "load capacity" was the figure for the whole top
Load capacity is normally set separately for the whole top, for each shelf, and for each drawer. A common story is feeling safe from the top's figure alone, then piling an amplifier or game console on a shelf and watching the shelf sag. Always check which part the figure refers to.
5. Heat built up and the equipment became unstable
If you put a recorder or game console in a closed cabinet with doors, heat dissipation may not keep up and operation can become unstable. The same goes for glass doors if the cabinet is sealed. It is safer to choose a model with an open back or ventilation holes, or to arrange things so you can use it with the doors left open.
6. Wanted to change the location after assembly
A large low board may no longer fit through the room's door after it is assembled. As a rule, assemble it in the room where it will finally be placed.
Especially common with wall-side stands is the case where the VESA standard matches but bumps on the back of the TV or protruding terminals interfere and prevent installation. Even if the VESA pitch matches, depending on the shape of the back, the included spacers may be needed. Check the TV's instruction manual for the screw length specified for wall mounting and whether spacers are required.
Care and maintenance after purchase: a TV stand is a long relationship with dust and load
A TV stand is not a product where you keep buying consumables, but some parts will certainly deteriorate if left alone. What it costs you to keep using it is less money than the effort of inspection. Deciding what to check and when lets you use it safely for a long time.
Retighten the screws once a year
On a self-assembly TV stand, the screws loosen little by little from everyday vibration and from opening and closing drawers. On wall-side stands in particular, once the joint between the pole and the base loosens, the TV's sway grows directly. Keep the included hex wrench and lightly retighten all the screws once a year, and you prevent most wobbling. A good way to make it a habit is to do it while you are already doing a big cleaning or rearranging the room.
Clear up dust and cables together
Dust gathers around a TV because of static electricity, and when the cables are tangled, cleaning becomes a chore and gets left. As a result, dust builds up around the outlet and the risk of tracking (a dust-related electrical fire) rises. Do not bundle cables too tightly with ties; leave enough slack that you can lift the bundle and wipe underneath quickly, which keeps up the cleaning frequency.
The points to watch differ by top material
| Material | Likely deterioration | Care |
| Printed laminate board (particleboard, etc.) | Swelling from moisture, chipped edges | Wring the cloth well when wiping with water. Do not put a humidifier right beside it |
| Veneer / solid wood | Warping from dryness, ring stains | Avoid direct sunlight and heater airflow |
| Tempered glass top | Scratches, chipped corners | Do not wipe with grit trapped on the surface. Mainly dry wiping |
| Steel (legs / pole) | Rust after paint peels | Touch up early once it peels |
Operate on the assumption that shelf sag "does not come back"
Shelves of particleboard or MDF will gradually keep a sag if heavy equipment sits on them for a long time, even within the load capacity. The sag does not return even after you remove the load. As prevention, place heavy equipment near the edge of the shelf (close to the support) and avoid concentrating it in the middle. With an adjustable shelf, you can also flip it upside down every few years to change the direction of the load.
Things you are likely to buy later
- Anti-tip straps and gel mats: adhesive types lose stickiness over time, so replacing them every few years is a given.
- Cables: when you change stands, the length you need changes. Especially if you route cables behind, you may need a longer HDMI or antenna cable than before.
- Felt pads and anti-scratch sheets: to prevent dents in the floor. The base of a wall-side stand has a small footprint, so these also help spread the concentrated load on a wooden floor.
If you plan to replace your TV, noting at purchase how large a TV the stand supports will help later. A stand often outlasts the TV, and at the next upgrade you tend to forget "how many inches fit on this stand" and end up measuring from scratch again.
When to buy and how to choose by shopping site: points specific to TV stands
A TV stand is large furniture you use for a long time, so rather than jumping at a low price, it is wiser to first make sure size, load capacity, and type fit, then aim for a period when discounts apply. Prices tend to move in the new-life season (early spring) and during the large sales held several times a year. Even so, furniture is not marked down for older models as sharply as home appliances, so once you find the specification you want, not clinging too much to timing is also a reasonable judgment.
Because it is large furniture, the "checks that matter" change depending on which online shopping site you buy from. Let us look only at TV stands.
| Where to buy | What to check for a TV stand |
|---|---|
| General online shopping malls | Check delivery and assembly options, shipping fees, and reviews mentioning "wobbling" or "sagging top" |
| Furniture specialty online shops | More detailed size and load-capacity listings, and sometimes consultation on delivery. The actual dimensions of each model number are clear |
| Physical stores | You can touch the item to check wobble and the feel of the top. It is also easy to consult about measuring for delivery |
Mall point rewards, coupons, and each card's reward rate change with the period and campaign, and the conditions, including whether there is an annual fee, are not fixed. Check the latest specific reward rates and conditions on each official page, and compare by total cost including shipping and assembly fees, not just the product price. Adding unneeded options for points can end up costing more, so narrowing to what you need is in the end the best value.
Finally, the priorities for choosing a TV stand once more. (1) Is there margin in load capacity? → (2) Does the width suit the TV's width and legs? → (3) Is the height type right for your viewing posture? → (4) Do the equipment and cables fit? → (5) Can it be delivered, and can tip-over protection be done? If you satisfy these in this order, you will arrive at a TV stand you will not regret buying, whatever the price.
Reading product-page notation: what "fits ○○ inches," "VESA 400×400," and "load capacity" really mean
TV stand product pages are full of numbers and letters, and it can be hard to tell what to compare. Here is a rundown of the meaning of commonly seen notation.
Size-related notation
- Supported TV size (up to 65 inches, etc.): the upper limit the manufacturer tested or assumed in the design, not a legal standard. What really matters is whether the TV's width, leg spacing, and weight fit the stand's specifications. Even for the same 65 inches, width differs by a few centimeters from maker to maker.
- Inches (size): the length of the screen's diagonal, not its width. For 16:9, about 87% of the diagonal is a rough guide to the width. A 65-inch TV is about 145cm wide.
- W / D / H: width / depth / height. On TV stands, whether H means "height to the top" or "overall height including the shelves" differs by product, so looking at the dimension lines in the drawing is the sure way.
- Effective inner dimensions: the actually usable size of the storage section. Judge whether a recorder or amplifier fits by this, not by the outer dimensions. With a front door, the effective width may be narrower by the hinge.
How to read VESA
"VESA 400×400" means the screw holes on the back of the TV are spaced 400mm apart horizontally and 400mm vertically. Wall-side stands and wall-mount brackets are often written as a range, such as "supports VESA 100×100 to 600×400," and the basic reading is that if your TV's figure falls within that range, it can be attached.
However, even when the numbers match, you may not be able to attach it. These are the three things to check.
- Screw diameterM4, M6, M8, and so on are used. The TV's instruction manual states the "screws for wall mounting," so check whether they match the screws included with the stand.
- Screw lengthToo short and it will not hold; too long and it may hit the inside of the TV. It is important not to exceed the specified length.
- Bumps on the backOn models with a curved back or protruding terminals, the bracket sits off the surface, so spacers are needed.
Load capacity and weight
| Notation | Meaning and what to look at |
| Top load capacity | The upper limit when the load is spread evenly over the whole top. A TV with a single center leg concentrates the load, so allow margin |
| Shelf load capacity (per shelf) | The upper limit for one shelf. For heavy equipment such as amplifiers, check the gap against the figure |
| Product weight | The heavier it is, the harder it is to tip, but the more burden when rearranging or cleaning. Also a factor in judging the delivery route |
| Package size and number of packages | Directly tied to whether it can pass through the entrance or stairs. If split into 2 or 3 packages, each box is smaller |
Notation for materials and structure
- Particleboard: a board made by bonding small pieces of wood. Widely used in products at stable prices; flat surfaces come easily, but it tends to be weak against moisture.
- MDF: a board made from compressed wood fibers. Highly workable, and often seen in painted-finish products.
- Veneer: thinly sliced natural wood laid on top. It shows the character of the wood grain.
- Finished product / assembly product: even a "finished product" may be a semi-assembled type that needs only the legs attached. Check the product description for whether tools are needed so you are not caught off guard on the day.
- F☆☆☆☆ (F four-star): a grade for formaldehyde emission, indicating the highest category. It is defined under Japan's Building Standards Act as a category not subject to restrictions on the area of use.
Product pages sometimes carry small notes such as "TV not included" or "TV fixing bracket sold separately." For wall-side stands the fixings are usually included, but it is not rare for the anti-tip fittings of a low board to be sold separately. We recommend reading the list of contents one last time.
FAQ
How much wider than the TV should the stand be?
As a guide, take the TV's actual width and add about 15 to 30cm of margin on each side. Always check by actual size in mm, not by inch size. If it is too narrow, the TV looks like it sticks out and unstable, and a two-legged TV's legs may not fit. If it is too wide, the space feels wasted, so leave a margin and decide in balance with the room.
What should I check about the VESA standard?
VESA is a common standard for the spacing of the screw holes on the back of a TV (200×200 or 400×400mm, etc.). When using a wall-side stand or wall-mount bracket, the VESA on the TV side and the VESA the stand supports must match. In addition, even if VESA matches, it is dangerous to exceed the supported weight, so check both hole position and weight against the spec sheet.
How much margin should I allow for load capacity?
Add up the total weight of everything you will put on it, including the TV, recorder, game console, and soundbar, and choose a load capacity with margin over that. Cutting it close causes sagging, damage, and tipping. The top and the internal shelves may have different load capacities, so when putting heavy equipment on a shelf, also check the shelf's figure.
Can I get a clean, wall-mounted look even in a rental?
A wall mount fixed to the wall requires restoring the wall and is not suited to rentals, but a wall-side stand can give an appearance close to a wall mount without damaging the wall. No repair is needed when you move out. However, because it stands on a pole, it sways easily in an earthquake, so be sure to fix it with an anti-tip strap or similar.
How should I store a soundbar and recorder?
Decide where the soundbar goes first. If it goes in front of the TV, measure whether its height avoids the screen's lower edge and legs; if on the stand's upper level, measure whether its width and height fit. A recorder is deep, so measure all three sides of the storage space: width, height, and depth, and choosing a stand with an open back or ventilated shelf for heat dissipation gives peace of mind.
What should I measure to avoid delivery trouble?
Measure the narrowest point among the entrance door opening, hallway corners, interior door width, and elevator, and compare it with the product's package size. A one-piece top wider than 180cm easily gets stuck on the way, so be careful. Self-assembly products can often be brought in in parts, so choosing self-assembly is one option if you are worried.
My TV stand's top has started to sag. Can I keep using it?
Sag does not return even if you reduce the load. First compare the top's load capacity with the actual weight, and if it is exceeded, reduce the equipment. If it sags even within the range, adding a support under the top or moving heavy equipment directly above the legs can slow its progress. If it is visibly warped, it affects the TV's stability and it is time to consider replacing it.
Can a TV with a single center leg sit on a wide stand?
Yes, but the load concentrates on the center of the top, so allowing margin in the top's load capacity gives peace of mind. Even when the stand is much wider than the TV, only the area near the center bears the weight, so the strain on the top is greater than with a TV with widely spaced legs. Choosing a product with reinforcement or a support near the center reduces the risk of sagging.
Can a wall-side stand be used together with a robot vacuum?
It depends on the shape of the base plate. With a plate-type base several centimeters thick, a robot vacuum may ride up onto it or be unable to get in. A type with thin legs raised off the floor, or a thin base, may let it pass. Check the base thickness and shape on the product page and compare it with the body height of your model.
Is it a problem to place the stand on a rug or carpet?
Sinking tends to cause wobbling, and a wall-side stand in particular loses stability because its center of gravity is high. Avoid long-pile rugs, and if you must lay one, put a hard board underneath to spread the load. Even on a wooden floor, products with a small base footprint may leave dents, so putting an anti-scratch sheet under them gives peace of mind.
Should I take apart an assembled TV stand when I move?
With self-assembly products such as particleboard, repeated disassembly and reassembly widens the screw holes and weakens the hold. If it fits through the doors, carrying it as it is does less harm to the structure. Take it apart only if it will not pass, and in that case put a small amount of wood glue into the original screw holes before tightening again to make up for the holding power.
* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.