Model Railroad Complete Guide 2026
Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.
The First Fork Is the Gauge: This Is Where the Worlds Split
When you start model railroading, the first thing to decide, before any particular train, is the gauge (the standard). It describes the combination of track width and scale, and with different gauges the trains, rails and controllers basically cannot be mixed. In other words, the gauge you pick first decides almost all the compatibility of everything you buy afterward. Buying a favorite train without settling this, then finding the track does not fit, is the most common trap for beginners.
There are roughly four gauges in circulation in Japan, and they differ enormously in the space they take, the cost and the number of products. The table below lines them up from a practical angle: how much room each one takes in your home. Thinking first about whether it fits in your room, rather than about the scale numbers, will speed up your decision.
| Gauge | Scale (approx.) | Track width | Space needed | Product range |
|---|---|---|---|---|
| N gauge | 1/150 (Japanese prototypes), 1/160 (European/US prototypes) | 9mm | An oval loop fits on a six-tatami floor or a desk | Overwhelmingly large |
| HO gauge (16-ban) | 1/80 (Japanese prototypes), 1/87 (European/US prototypes) | 16.5mm | A tabletop works for just running trains; a detailed layout needs a dedicated room | Large, but at higher prices |
| Z gauge | 1/220 | 6.5mm | The smallest class, where a layout fits on a small desk | Limited; for advanced hobbyists |
| O and G gauges | About 1/45 and about 1/22.5 | 32mm/45mm | The strongest presence, but often too much for indoors | Few, highly specialized |
To give the conclusion first: N gauge is the right first step. It covers nearly every type, from bullet trains and commuter trains to limited expresses and steam locomotives, and it has the richest information and secondhand market. HO is the natural next step for people who fall for the heft and fine detail of a running train, or who have gained some experience in N. From here on, this article focuses on N gauge, which most beginners choose.
Switching gauges later is the most expensive mistake. Rails, trains and controllers all have to be redone, so deciding at the start and sticking to one gauge prevents most wasted spending.
Understanding Track System Lock-In: KATO vs. TOMIX
Once you have chosen a gauge, the next thing to be aware of is the track system. Even within N gauge, each maker has its own track standard (roadbed shape, connecting joints, power supply method), and this effectively fixes your choice of brand. The two main systems are KATO's Unitrack and TOMIX's Fine Track.
- KATO Unitrack: The roadbed (the base of the track) is thick and sturdy, the joints lock together firmly, and it stays put even when laid straight on the floor. It suits repeated setup and takedown, known as "floor running" (ozashiki unten), and is good for beginners who want to take it out of the box and run right away.
- TOMIX Fine Track: It offers a wide range of rail widths and variations, and is designed so that motorized turnouts (switches) and complex wiring are easy to build. It is strong for people who want to build a fixed diorama, or expand to double track, overpasses and rail yards. It gives the impression of being designed to be combined with scenery parts.
"Converter joints" that physically connect different systems are sold, but once you start relying on them, managing your track stock gets complicated. When starting out, stick to one system and add trains, rails and accessories from the same brand. That is the right call in the long run. "Which maker produces the trains I like" is also a perfectly good reason to choose a system.
The trains themselves will run on KATO rails even if they are TOMIX trains (because the wheel gauge is a common 9 mm). The compatibility worries are mainly on the track and controller side. If you keep just those consistent, you can pick trains from whichever maker you like without big problems.
Spotting the Powered Car (M Car): Avoid Buying a Set That Will Not Run
The most disappointing failure in model railroading is buying a set that will not run. Almost always, the cause is buying a train set that lacks the car with the motor, the powered car (called the M car). On a real train the lead car looks like the one doing the work, but on a model the motor is hidden in one car somewhere in the set, and without it the train will not move at all.
Products fall into three main types: basic sets, add-on sets and single cars. Knowing the character of each greatly reduces buying mistakes.
| Product type | What is inside (approx.) | Powered car (M car) | Good for |
|---|---|---|---|
| Starter set | Train + rails + controller, all in one | Included | People just starting out; the first box |
| Basic set | The core few cars of a train | Often included | People who already own rails |
| Add-on set | Only trailer cars to lengthen a train | Normally not included | People who already have a basic set |
| Single car (loose) | One car at a time | Depends on the label (M/T) | People who want to build a train car by car |
When buying a single car, the product name or part number carries a label next to it: "M" (motorized) or "T" (trailer, no motor). Even for a long train, you basically need only one powered car. Too many powered cars can upset power consumption and speed balance, so the standard approach is to secure power with the basic set and lengthen the train with T cars.
Part Numbers, R Notation and Couplers: Once You Can Read the Codes, Comparing Gets Much Faster
Unlike the spec sheet of an appliance, a model railroad product page looks like a string of model numbers and abbreviations. Yet these codes decide whether a train runs or not, and whether it sits on the track you already own. Learning to read just this part first saves a lot of hesitation.
First, look at two numbers: scale and track gauge
N gauge has a track gauge (the inner width between the rails) of 9 mm. Japanese conventional-line trains are mostly made at about 1/150, the Shinkansen is often 1/160, and 1/160 is the standard for European and American N. HO has a track gauge of 16.5 mm, with 1/80 for Japanese prototypes (sometimes called 16-ban) and 1/87 for European and American ones. So even within "HO," the scale differs between Japanese and foreign trains, and side by side the car bodies can differ in size. If you only want to run them, a matching gauge is enough to put them on the track, but if you want them to look uniform, check the scale number too.
The start of the part number and the basic/add-on relationship
For KATO N gauge, items starting with "10-" are generally sets, and items with only numbers are single cars. TOMIX HO products carry an "HO-" prefix, so they are hard to confuse with N. Train sets are typically sold as a basic set + add-on set, so building a full train as in real life assumes two or more boxes. The powered car is in the basic set, so buying only the add-on set will not run. Conversely, if you try to add only the add-on set later, the add-on set is often produced in smaller numbers and has already disappeared.
Track codes are made of shape + dimension + angle
TOMIX's "C280-45" means a curve with a radius of 280 mm and a central angle of 45 degrees, and "S140" means a 140 mm straight. KATO also uses a form like "R249-45," where R stands for radius. The tricky part is that the two makers use different standard straight lengths: KATO builds its system around 248 mm and TOMIX around 140 mm. As a result, even for the same "one lap of an oval," the required floor area differs slightly. On the train side there is also a "minimum curve radius R___" listing, which is the tightest curve that car can take without derailing. The longer the locomotive, articulated car or HO car, the larger the number, and if your curves are tighter than that, you cannot run it the day you buy it.
Abbreviations for couplers and electrical features
For couplers, besides the standard Arnold coupler that comes attached, there are the KATO coupler, TOMIX's TN coupler and others, and whether they are "truck-mounted" on the bogie or "body-mounted" on the car body changes the look and the tolerance for tight curves. On the electrical side, useful clues include "constant lighting compatible" (lights stay on while stopped; the power pack must support it too), "interior lights (sold separately)" which are not fitted to the car, "DCC friendly" for cars prepared for DCC conversion, and decoder connector standard names (NEXT18, 21-pin and so on).
| Example notation | Meaning | What to compare |
| 1/150, 9 mm | Standard for Japanese N gauge | Shinkansen is often 1/160 |
| 10-◯◯◯◯ | KATO set part number | Single cars have numbers only |
| Basic / add-on | A full train assumes two or more boxes | Power is on the basic set side |
| C280-45/R249-45 | Curve radius and central angle | A larger radius means more stable running |
| Minimum curve radius | The limit that car can turn | Check against the radius of your curves |
| Constant lighting compatible | Headlights stay on while stopped | The power pack must support it too |
| Interior lights (sold separately) | Not fitted to the car | Plan to buy enough for every car |
If you are unsure when comparing, check just three things first: whether it is powered, the minimum curve radius, and the coupler type. If those three match what you already own, differences in the finer notation can be made up later.
Why a Starter Set Is the Sensible First Box
A train, rails and a controller (power pack) are the minimum setup needed to run. You can buy them separately, but there is little reason to take that detour when starting out. Many makers offer a starter set that packs these three together.
- Runs right out of the box: no worrying about how rails combine or whether the controller matches. It is the shortest route to your first "it runs!" moment.
- Often cheaper in total than buying separately: sets are frequently priced lower than buying the same contents individually.
- A base for expansion: simply add straights, curves and turnouts to the supplied rails, and you can grow naturally from a loop to a complex layout.
A standard analog controller is enough at first. Turning the throttle changes the speed; it is a simple method and quite sufficient for beginners. DCC (digital control), covered below, is a matter for later, and it is not too late to consider it once you have learned the joy of running trains. First run a small loop around and around and feel which of running, dioramas or collecting attracts you most. That is the quickest way to decide the direction of your expansion.
The Character of Each Maker: Choose by What You Want to Collect
Even if you lean toward either KATO or TOMIX for the track system, you can choose trains from many different makers. Each has its strengths, and looking at which maker produces more of the models you want to display will show you who suits you.
- KATO (Kato Seisakujo): Known for stable running and durability. A long-established maker with a wide range, from JNR-type steam locomotives and older electric locomotives to the latest models, and also many European and American prototypes. It has a solid repair setup and gives a strong sense of reassurance for long-term use. It tends to be the reference point for people who want to get a reliable running environment in place first.
- TOMIX (Tomytec): Stands out for its rich range of scenery parts and structures (buildings, roads, trees). If you lean toward dioramas, the wide choice is its weapon. It also has plenty of related products that broaden your world, such as streetcars (Tram Collection) and the Bus Collection (Geocolle).
- MICRO ACE: Actively produces niche private railway cars, rarities and overseas types that the two big makers do not touch. For collectors aiming at "the one model nobody else makes." Some say the finish varies from unit to unit, so one view is that it is safer to try it after you have some experience.
- GREENMAX (GM): Originally known for kits you assemble yourself, and supported by people who enjoy building. In recent years its ready-made products have increased, centered on Kanto private railways. It also serves as a "material" for those who enjoy painting and modifying.
- MODEMO and other specialist brands: Specialize in particular genres such as streetcars and light railways. They tend to be where people end up last when chasing models that the mainstream does not offer.
If you cannot decide on your first train, use a KATO or TOMIX starter set as the baseline and decide by which camp has more of the trains you like. That is a choice with few failures. Which one your friends or acquaintances use also matters quietly, in terms of lending parts and exchanging information.
Running, Building, Collecting: Finding Your Center of Gravity
The enjoyment of model railroading roughly divides into three centers of gravity. It is rare to have just one, and they usually overlap, but knowing which one pulls you most makes it clear where to spend money and time.
- Running: A style where the pleasure lies in smooth running itself. Sending a long train straight through, switching turnouts to recreate shunting work, or enjoying driving with sound through DCC. If you value this, putting your budget toward track quality, controller performance and the running stability of your trains raises your satisfaction.
- Building: A style where you build miniature scenes such as mountains, rivers, townscapes, stations and crossings, and run trains through them. You shape the terrain with styrofoam and plaster, then finish it with paint and vegetation. Because the process up to completion is itself the fun, investment centers on structures and scenery materials.
- Collecting: A style whose main purpose is to gather trains of favorite types, eras and lines, and to arrange and admire them. It values fine modeling and rarity, and securing new products by pre-order or hunting for discontinued ones is itself part of the fun. The practical point is that it works even without space to run trains.
Model railroading as a hobby has lasted for decades because you can move back and forth among these three centers. When you tire of running, build a diorama; when you tire of building, admire your favorite types. Being able to shift your center of gravity as you enjoy it is the depth of this hobby.
Poor Running Is Usually the Rails: Care for Power Contact and the Drive
After playing for a while, you will always meet a moment when the train stutters or stops partway. Here many beginners jump to the conclusion that the train is broken, but in most cases the cause is poor power contact from dirt on the rail surface. When the metal surface of the track oxidizes or collects dust, electricity does not flow well at the contact with the wheels, and running flickers.
- Suspect rail cleaning first: Lightly wiping the surface with a model railroad rail cleaner (a cleaning car or cotton-swab type) often brings running back as if by magic. When you think it may be broken, start here. Also avoid silicone sprays on the rails, since they make the wheels slip and make power contact less stable.
- Grease and oil for the powered car: The gears and axles of a powered car wear and run dry with use. Applying an appropriate amount of grease or lubricant made for model railroads extends running life. Ordinary general-purpose sprays may contain ingredients that attack plastic, so always use one that is clearly marked as suitable for model railroads.
- Run it now and then: If it is not moved for a long time, the drive tends to seize up. Running it briefly even once every six months helps both in checking its condition and in maintaining it.
- Handling small parts: Roof equipment, antennas, hoods, door parts and the like vanish in an instant if dropped. Do maintenance and modifications on a white work mat, and keep removed parts together in a small dish or case to reduce losses.
- When in doubt, use the maker's repair service: When a drive or contact problem is hard to solve yourself, the repair services of the main makers such as KATO and TOMIX are there to rely on. Consulting them is safer than taking it apart and making it worse, and it often ends up cheaper.
For storage, direct sunlight fades the paint, and high heat and humidity cause rust and deformation of metal parts. The basics are to keep trains in the original box or a case with foam and put them on a shelf or in a drawer out of the sun. If you can see maintenance not as a chore but as time spent handling a favorite train with care, this becomes a hobby you can keep for 10 or 20 years.
Pre-Order Distribution, Unique to Model Railroads, and Smart Ways to Build Your Collection
Buying model railroad products has its own rhythm, different from appliances or daily goods. Many new products circulate starting from pre-orders (order-based production), disappear from store shelves some time after release, and you wait for a reissue (rerun). Whether you know this flow or not changes whether you can get the train you want and whether you can keep spending down. It is a world where the generic idea of searching online for the lowest price will make you miss things.
- Decide which models you wantInstead of "just something cheap," first decide the axis of lines, eras and types you want to collect. Model railroads cover a wide range of models, and without an axis it is easy to buy endlessly. Just setting priorities tightens how you use your budget.
- Secure it at the pre-order stageNew products of popular models are easiest to obtain during the pre-order period, and model shops and large retailers often discount them below list price. After release, stock thins out, discounts disappear and the item may become hard to get. If your target is set, pre-ordering is the most sensible.
- Use large retailers and specialty shops differentlyLarge electronics retailers attract with discounts and point rewards. Model specialty shops, on the other hand, have knowledgeable staff and are strong for advice on choosing and for stock of older products. Dividing roles as "a specialty shop when I want advice, a large retailer when I know what I want and want a good deal" avoids waste. Reward rates and conditions change with the season, so check each store's latest information.
- Follow reissue (rerun) informationFor a model you missed at pre-order, waiting for the maker's reissue announcement or a shop's reissue request is a calmer choice than chasing high prices on flea-market apps. Reruns of popular models are fairly frequent in model railroading. Official websites and social media are the primary sources.
- Have a system that keeps you from overbuyingBuying "this and that" will break both your storage space and your budget. Be aware of the physical limit of your shelf capacity and buy only what fits. This limit quietly works to keep you enjoying the hobby for a long time without getting tired of it.
Prices of trains, rails and controllers vary by retailer and time. For specific amounts, check the latest listings on each e-commerce site and model shop. Point reward rates and campaign conditions also change from time to time, so it is safest to check each official announcement as well.
Announcements, Pre-Orders, Reruns: How to Move Through the Model Railroad Year Without Missing Out
Model railroading is not a world where the same items are always lined up in stores. Distribution is strongly order-based, producing only the quantities that can be forecast, so "when to buy" almost means "when to act." Here we lay out the rhythm unique to this hobby.
New products go "announcement, pre-order, release," and store stock is the last remainder
Both KATO and TOMIX regularly release new product information, and pre-orders open from there. Going to a store on the release day to buy is, you should think, going to pick up what is left after the pre-orders are subtracted. Popular models and region-limited colors quietly vanish from the market within a few weeks of release. On the other hand, release delays are not rare. It can take more than six months from pre-order to actually having it in hand, so for peace of mind it is safer to judge a pre-order not by "I want it right now" but by "will I want it next year?"
- Pick up the announcementThe maker's new product notice is the starting point. This is where part numbers and specifications are first confirmed.
- Decide on the pre-orderOrder the basic and add-on sets together. If you put off the add-on, it gets harder to obtain.
- Factor in delaysThe release month is a guide. Seeing it as time to prepare your rails and power pack makes it easier on the mind.
- If you miss the first run, wait for a rerunStandard items are produced again every few years.
Reruns, the Other Chance to Get One
The saving grace of this hobby is that reruns (reissues) exist. Popular trains, rails and power packs are produced again every few years under the same part number. So even if you miss the first run, waiting for the next production announcement often lets you buy more calmly in the end than rushing after overpriced items in circulation. There are exceptions, though: limited items such as commemorative editions or those made for specific stores are hard to rerun. For these alone, treating "passing means there is no next time" leaves fewer regrets.
The Seasonal Peaks Are Year-End and Spring
From year-end through the New Year holidays is when starter sets line the shelves the most. The beginner-oriented lineup thickens to match gift demand, so it is a time of wide choice for those about to start. The other peak is around the spring timetable revision. Demand for models of trains announced for retirement rises at once, while the debut of a new type spurs productization. Exhibitions are also seasonal markers: at the Shizuoka Hobby Show every May and at summer model railroad events, each maker shows prototypes and products in development. Being able to decide on pre-orders after knowing "what is likely to come out soon" is a big advantage.
Signs of a Renewal, and What Does Not Need Rushing
Even for the same model, specifications are improved over a few years: a new generation of drive unit, LED lighting, a changed coupler. Old and new versions are sometimes on sale at the same time, so when you find products of the same name with different part numbers and release years, compare their running performance and coupler descriptions. By contrast, rails, power packs and scenery materials (trees, powder, structures) are categories with stable supply and long production runs. Trains when they move, track and scenery when things are calm. Running things in this order of priority reduces what you miss within a limited budget.
Whether a pre-order can be canceled and how deadlines are handled differ by retailer. The longer the pre-order, the more the difference in conditions matters, so check the terms before applying.
You Can Build Even in a Small Space: Designing a Layout from the Space Backward
The worry "I want to build a layout but my room is small" is a wall shared by beginners and veterans alike. N gauge, however, is quite flexible on this point. The key is not trying to build big. People who finish even a small layout end up enjoying it longer than those who aim for a vast one and leave it unfinished.
- Start with the smallest loop: In N gauge, a basic oval (loop) can be built from a space of roughly 90 cm by 60 cm. First complete one "running scene" at this size, and the sense of achievement becomes fuel for the next step.
- Make it storable: There are folding layout boards and ways to build it so it can be stood up for storage when not in use. Some even use the wooden door of a closet as the board, so even if you cannot leave it up permanently, there is plenty of ways to play.
- Expand in stages: If you get greedy with double track and overpasses from the start, you tend to stumble on the wiring and stop. If you finish a single-track loop, then add turnouts and a siding, then place a station, and so on step by step, you can pile up "I did it" at each stage.
- Floor running as an option: Without insisting on a fixed layout, "floor running" (ozashiki unten), laying rails on the floor each time you play and putting them away afterward, is a perfectly good style. As mentioned earlier, systems with a sturdy roadbed such as KATO Unitrack suit this repeated setup and takedown.
Space is a constraint but also a design condition that sets the direction of the layout. Working backward, "if it fits here, this scale and this wiring," brings you closer to completion than expanding without limit.
DCC and Enjoying It with Children: Two Common Crossroads
After continuing for a while, many people run into two questions: "Should I add DCC?" and "Can I play with my child?" Beginners tend to worry about both early on, yet the answers are surprisingly simple.
DCC (Digital Command Control) does not need to be rushed
DCC is a digital system in which each train carries a small control chip called a decoder, letting you run several trains independently and finely control running sounds, whistles and interior lights. It is powerful for people who want to run many trains at once on a large layout, or who care about sound. But installing decoders in the trains costs money and effort, and it is not something a beginner needs right away. The natural order is to run in analog first and consider it once you feel "I want more expression."
If you want to enjoy it with a child, consider their age
Model railroad products are precision items, and there are risks of losing or swallowing small parts and of damaging a train by dropping it. A rough guide for enjoying the operation together is upper elementary school or older. For preschool through the lower grades, it is safer and more lasting to start with sturdy toy-standard train toys (such as Plarail) and step up to model railroads when they are older. Even when playing together, the stance of having an adult assist with the controller is reassuring.
Specific Pitfalls for Beginners: Avoiding Them in Advance
Some of this overlaps with what came before, but here are the mistakes people actually tend to make, lined up in the order they trip over them. Reading through once greatly reduces wasted steps in the first few months.
- Buying rails from different systems and mixing them → Unitrack and Fine Track do not fit together as they are. Settle on one from the start.
- Buying a set without a powered car (M car) → An add-on set or trailer cars alone will not run. Always check the "M/T" label and the type of set.
- Jumping to "broken" at the first running problem → Clean the rails first. Most cases are fixed that way.
- Using general-purpose lubricant on gears → Ingredients that attack plastic can damage the drive. Always use a product made for model railroads.
- Losing small parts right after opening → Handle them on a white work mat and put removed parts in a case.
- Expanding without thinking about space → Trying to build big and leaving it unfinished. Finish small, then expand.
- Buying on without deciding an axis → Without an axis of lines and eras you want to collect, both storage and budget swell without limit.
Frequently Asked Questions
Should my first train be N gauge or HO gauge?
For a beginner, N gauge is almost always the right answer. Products are available from bullet trains to commuter trains and steam locomotives, information and the secondhand market are the richest, and even in a six-tatami room you can build an oval layout. HO has the appeal of heft and fine detail when running, but demands more space and cost. The natural order is to enjoy N for a while, then move to HO if needed.
Can I mix KATO and TOMIX track?
They do not fit together as they are. KATO's Unitrack and TOMIX's Fine Track differ in roadbed shape and joints. Converter joints exist, but once you start relying on them, managing track stock becomes cumbersome. When starting out, it is safer to stick to one system. Also, the wheel gauge is a common 9 mm, so if you unify the track, trains from other makers will run too.
What is a powered car (M car), and how can I tell?
The M car is the car with a built-in motor that actually runs the train. If you buy a set that does not include one (an add-on set or trailer cars only), it will not run. For single cars, you can tell by the "M" (motorized) or "T" (trailer, no motor) label next to the part number. Even for a long train, you basically need only one powered car. The standard approach is to secure the M car with a basic set and lengthen the train with T cars.
Running suddenly got worse. Is it broken?
Suspect dirty rails first. In most cases the cause is poor power contact from surface oxidation or dust, and wiping with a model railroad rail cleaner often fixes it. Silicone sprays make the wheels slip and backfire. If cleaning does not help, consider that the powered car may be low on oil, or add dedicated grease or lubricant. If that still does not work, the maker's repair service is the safe choice.
Can I build a layout in a small room?
Yes. In N gauge, a basic oval can be built from about 90 cm by 60 cm. There are also folding boards and ways to build it so it can be stood up for storage when not in use. Some people use the wooden door of a closet as the board. Rather than building big and leaving it unfinished, finishing small and expanding in stages builds up a sense of achievement and lasts longer.
How can I get a train I missed at pre-order?
Rather than chasing high prices at flea markets, waiting for the maker's reissue (rerun) announcement or registering for a shop's reissue request is the calmer way. Reruns of popular models are fairly frequent in model railroading. Official websites and social media are the primary sources, so following the maker of the model you want makes it harder to miss announcements.
Do I need DCC from the start?
No. DCC is a digital system that excels at independent control of several trains and sound reproduction, but putting a decoder in each train costs money and effort. It is natural to run with a standard analog controller first and consider it once you feel "I want more expression." It is early enough to think about it when you move on to large layouts or elaborate effects.
Can I enjoy it with my children?
A rough guide for enjoying the operation together is upper elementary school or older. Because there are risks of losing or swallowing small parts and of damaging a train by dropping it, adult support is a prerequisite for younger children. For preschoolers through lower elementary grades, starting with sturdy toy-standard train toys (such as Plarail) and stepping up to model railroads when they are older is a safe path that can be enjoyed for a long time.
Is it fine to just display them as a collection without running them?
Of course. The style of lining up fine models to admire has the advantage of being enjoyable even without space to run trains. Many people manage them in a showcase or a dedicated shelf. However, if they are not moved for a long time the drive tends to seize up, so running them briefly once every six months to a year and checking their condition spares you trouble when you do want to run them.
Do N gauge train sets come with interior lights?
In most products, interior lights are sold separately and are not fitted to the car. If the product page says "interior light compatible," it means they can be installed, not that they are included. Lighting a whole train requires enough for every car, which adds up to a surprisingly sizable purchase. A safe approach is to try just the lead car first, find your preferences for brightness and color, and then add more.
What happens if a product I pre-ordered is delayed?
Release date changes are not rare in model railroading, and can slip by several months. The pre-order is generally carried over as is, but whether you can cancel and how deadlines are handled differ by retailer. The longer the pre-order, the more the difference in conditions matters, so it is reassuring to check the terms before applying. Seeing the waiting period as time to prepare your rails and power pack makes it easier on the mind.
What is the difference between series where the drive unit is sold separately and ready-made train sets?
Some series, such as Tetsudo Collection, are for display as they are, and to run them you need to buy a dedicated drive unit, metal wheels and pantograph separately and install them. The part number of the compatible drive unit is specified, so to avoid buying only the body and finding it will not run, check the specified part number and its availability before you buy.
Is it okay to run a train that has sat in its box for years?
Please avoid suddenly running it at full speed on the main line. The rubber tires on the wheels harden or break with age, and the grease in the drive may have set, making it stiff. First clean the dirt from the rails and wheels, break it in gradually at low speed, and watch how it behaves. If you notice symptoms such as strange noises or running in only one direction, do not force it. Consider disassembly and cleaning or replacing the rubber tires.
* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.