How to Think About Residential Solar Power | How It Works, Pros and Cons, and Deciding Whether to Install
Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.
Before asking "will it pay for itself?", understand the shape of solar profit and loss
With electricity bills rising, residential solar is often talked about in terms of "lower bills" and "peace of mind during outages." But the actual profit and loss swings widely depending on each household's conditions. Even with the same capacity, a different roof direction or a different daily usage pattern can change the payback period by several years. So the first thing to grasp is that solar is not a "money-making machine" but a long-term household finance plan, in which you recover the upfront cost over a decade or more through savings on electricity bills.
This article does not recommend any particular manufacturer or installer. As neutral information, it focuses on issues specific to solar: how to estimate power generation, generational differences in components such as panels and power conditioners, the idea of self-consumption, where selling-electricity programs stand today, the differences between PPA/lease and ownership, how to read a quotation, and how to spot predatory sales tactics. Costs and the conditions for selling power or receiving subsidies change constantly with time and region, so always check the latest primary sources when you are deciding.
Solar profit and loss is roughly determined by "installed capacity (kW) x annual generation x how much you saved through self-consumption − upfront cost − maintenance cost". Both the generation figure and the electricity rate are meaningless unless you plug in your own home's numbers, so the shortcut is to start by having your annual electricity use (from your meter-reading slip) and your roof's orientation at hand.
Before buying more, see whether you can shift when you use power
How well solar works is not decided by equipment performance alone. As the section on self-consumption below explains, the result depends on whether the household is using electricity during the hours when the panels are generating. With the same equipment, a home active at midday and a home empty at midday end up with different amounts left in their pockets. It looks like a question about equipment, but it is also a question about your daily schedule.
This viewpoint applies to shopping in general, not just electricity. When choosing time-saving tools, people tend to look at the spec sheet first, but what decides the benefit is "where it fits in your day". Even with scheduling or automatic operation, things that need you present to start them or need an operation partway through can only work during the hours you are home. Conversely, things that can finish while you are out can run more times a day, even at the same performance.
And one step before that, there is the option of seeing whether you can shift when you use power before buying more. If changing the run time is enough, it costs nothing. Adding equipment only after finding that shifting does not solve it also makes your selection criteria clearer. For where to draw the line between what to hand to machines and what to do by hand, see also how far to delegate housework to tools.
How much will it generate a year? Estimating with kW, kWh, and capacity factor
Solar catalogs list the panels' total output (capacity) as "○ kW," but this is "the instantaneous maximum at midday on a clear day," which is different from the amount of electricity (kWh) you actually get over a year. What really matters in your decision is roughly how much electricity 1 kW of panels produces in a year. For homes, around 1,000 to 1,300 kWh per kW per year is generally cited as a guide, varying with local sunshine and roof conditions. For example, a 4 kW system would be roughly in the 4,000 to 5,000 kWh range per year.
This output changes predictably with your roof's orientation and tilt. As a rough tendency, if due south is 100, east- or west-facing drops to around 80 percent, and north-facing is at a significant disadvantage. As for tilt, roofs that are too flat or too steep are less efficient than the roughly 30-degree angle usually considered best. In addition, shadows from neighboring buildings, utility poles, or another structure on your own property cut generation more than you might imagine. Because panels are wired in series, shade on one part can drag down the output of the whole string, which is a common reason a south-facing system generates less than expected.
| Condition | Effect on generation (guide) |
|---|---|
| Roof orientation | Due south is the most favorable. East or west is around 80 percent; north is at a significant disadvantage |
| Tilt angle | Around 30 degrees is efficient. Too flat or too steep reduces output |
| Shade | Even partial shade can lower the output of an entire string |
| Region and weather | Generation rises in regions and years with longer sunshine hours |
| Panel temperature | In the heat of midsummer, efficiency actually drops |
The last one, the effect of temperature, is surprising. Solar panels might seem to generate the most in the strong light of midsummer, but the cells, being semiconductors, lose efficiency as they get hotter, and it is not unusual for "a clear early-spring day to yield more over the day than midsummer noon." Do not swallow a sales pitch of "hurry before summer"; the right way is to think in terms of total annual generation.
Panel types and generational differences: monocrystalline, PERC, TOPCon, and HJT
People tend to think "all panels are the same," but even among the silicon panels that dominate residential use, there are differences in conversion efficiency (how much electricity you get from the same area) and in the degree of degradation over time. On the limited roofs of Japan, the higher the efficiency of each panel, the more capacity you can fit in the limited area, so this is a key point in selection.
- Monocrystalline silicon: The current mainstream for homes. More efficient than polycrystalline, making it easier to gain capacity on a limited roof area.
- PERC: A structure based on monocrystalline cells, with a rear surface that reflects light to raise efficiency. Many recent products are of this type.
- TOPCon and HJT (heterojunction): Newer high-efficiency cell technologies. They are said to have strengths in conversion efficiency and in performance at high temperatures and in weak light, and are spreading in higher-grade models.
Newer-generation, high-efficiency panels have an advantage on small roofs, but prices rise accordingly. What matters is not to jump at something "because it is the latest," but to choose on cost-effectiveness without fixating on efficiency if your own roof area can hold the capacity you need. If your roof is large and free of shade, you can secure plenty of generation without chasing top efficiency.
Quotations state "conversion efficiency ○%" and "nominal maximum output ○ W per panel." Checking the output per panel and the number of panels, not just total capacity, also lets you judge whether the layout on your roof is reasonable. Even at the same 4 kW, a configuration with fewer, higher-output panels can sometimes be less affected by shade.
The overlooked lead player: the power conditioner and its "replacement cost"
Solar discussions tend to focus on panels, but the system has another lead player, the power conditioner. It converts the direct current (DC) made by the panels into alternating current (AC) usable at home; without it, the electricity generated cannot be used. And what matters for long-term finances is that a power conditioner has a shorter life than the panels.
While panels keep generating for 20 years or more, power conditioners generally need to be replaced or renewed once, roughly every 10 to 15 years. That means that if you estimate "payback in ○ years" from the upfront cost alone, the replacement cost may land around or before the point you finish recovering your investment. An estimate that leaves out this replacement cost makes the payback period look shorter than it really is. Treat the "upfront cost" and the "long-term maintenance cost, including power conditioner replacement" separately; that is the trick to judging solar calmly.
- Power conditioner: Expected to need replacement or renewal in 10 to 15 years. Build the replacement cost into your estimate.
- Panels: Long-lived, but output declines slightly over the years (gradual degradation).
- Periodic inspection: Regular inspections are recommended to keep safety and performance over the long term.
- Warranties: Equipment, output, and workmanship warranties vary in content and number of years by product and installer.
From "selling" to "using it yourself": the idea of the self-consumption rate
Solar once spread with the image of "selling surplus electricity at a high price to earn money." But in recent years, as the selling rate has been reviewed, the mainstream view has become that using up the electricity you produce in your own home (self-consumption) benefits the household budget more than selling it. The reason is simple: the rate at which you buy electricity is often higher than the rate at which you sell it. A reversal has occurred in which not having to buy 1 kWh is worth more than selling 1 kWh.
The key here is the self-consumption rate, the share of the electricity you produce that you manage to use at home. Since generation happens during the day, households that are home at midday and use a lot of electricity have a higher self-consumption rate and gain more. Conversely, in dual-income households where nobody is home during the day, the midday generation tends to go to sales, and the savings are thin. What helps in that case is the storage battery covered next, and smart ways of using appliances.
Even homes with few people at home at midday can raise their self-consumption rate by shifting the dishwasher, washer-dryer, heat-pump water heater (Ecocute), EV charging, and so on into the generation hours. Simply moving toward running things at midday with timers or a HEMS (home energy management system) changes the savings you actually feel, even with the same equipment.
Storage batteries and selling power (FIT and post-FIT): should you add one, and when to decide
A storage battery stores the electricity you made at midday but could not use up, so you can use it at night or during an outage. It is reassuring for households that prioritize outage preparedness, but the battery itself costs a considerable amount and has limited capacity. Even when told "buying it with solar is a better deal," it is best to think concretely about what you want to run during an outage and for how long, and how much electricity you use at night, before deciding. Installing solar alone first and considering a battery later, once you feel the need, is also a perfectly realistic order.
As for selling power, equipment installed under the FIT program, which purchases electricity at a fixed price for a set period, becomes "post-FIT" when its purchase period ends (10 years was typical for homes). After that, the selling rate falls, or you move to a stage where you choose your own buyer. If you are considering installing now, it is safer to assume FIT rates have been revised downward year after year and not rely too much on selling income. A design that puts self-consumption at the center and treats selling as a bonus suits the times. The specific rates, periods, and conditions of the program keep changing, so check the latest information from public agencies when you are deciding.
| Issue | Point of view |
|---|---|
| Storage battery | Decide whether you need one from the amount required in outages and nighttime usage. Adding one later is also an option |
| FIT (fixed-price purchase) | The purchase period was typically 10 years for homes. Rates have been revised year after year |
| After FIT | After the purchase period ends, the rate drops, or you move to a stage of choosing your own buyer |
| Design axis | Not relying on selling income and building around self-consumption is the recent mainstream |
Owning, loans, PPA, and leases: how you pay changes the profit and loss
Even with the same solar system, who owns the equipment and how the upfront cost is paid have completely different effects on the household budget. In recent years, contracts that advertise zero upfront cost have increased, and if you hear only "it can be installed for free" without understanding this, you may later feel it "has not become as cheap as expected."
- Ownership (cash): A large upfront cost, but the equipment is yours. You get the full benefit of the electricity generated, and it tends to be advantageous over the long run.
- Solar loan: Spreads the upfront cost through borrowing. Look at the balance between the monthly payment and the electricity savings. Interest adds to the cost.
- PPA (power sales) model: A company installs and owns the equipment on your roof, and the household buys the electricity it uses. The upfront cost is kept down, but during the contract the equipment is not yours, and you are charged even for the portion you consume yourself.
- Lease: You rent the equipment by paying a monthly lease fee. Here too, the equipment is not yours during the contract.
"Zero upfront cost" PPAs and leases have a low barrier to entry, but conditions such as the long contract period, what happens on early cancellation, moving, or selling the house, and what happens to the equipment after the term ends matter later. Comparing total amounts over the long term, ownership tends to bring greater benefit for homes with good roof conditions where people will live a long time. Which form suits you should be decided by laying out and comparing your available funds, the number of years you will keep living there, and the restrictions of the contract.
In a PPA or lease contract, be sure to check the contract term, the conditions for early cancellation, what happens to the equipment when the term ends (free transfer or removal), and how a move is handled. Do not decide on the words "zero upfront cost" alone; the key is to look at the total amount and restrictions of the contract as a whole.
Dual-income, working from home, multi-generational, planning to rent out: where the answer depends on your way of living
With residential solar, even on the same roof and with the same capacity, the value that stays in your hands differs greatly depending on the daily rhythm of the people living there. Since generation happens only during the day, "whether someone is home using electricity at midday" is the first fork in the road. Here are four typical patterns, with the direction to take and the choices to avoid.
Dual-income households with an empty home on weekdays
If almost nobody is home during the day, most of the electricity generated is not self-consumed and flows straight to the grid. In this case, the first thing to consider is not being greedy with capacity. This group is easily offered proposals to put on as many panels as the roof can hold, but if you add capacity while the self-consumption rate stays low, the value of the added portion is pulled down to the level of the selling rate. Operational tweaks work better, such as shifting the Ecocute heating hours from late night to midday, or running the dishwasher and washer-dryer at midday with timers. A storage battery fits a dual-income household's life in theory, storing at midday and using at night, but it is a heavy investment, so it is safer to leave room to consider it later, in line with when the power conditioner is renewed or when you reach post-FIT.
Households working from home or with small children
Homes where air conditioners, lighting, and PCs keep running during the day are the best match for solar. Here, holding capacity down too far is the greater loss; if your roof conditions allow, secure a reasonable capacity and design the system so that daytime consumption is covered by generation as much as possible. What to avoid is fixating on the south face and leaving the east and west faces empty. The east and west faces have lower peak output than the south, but their generation rises in the morning and evening, which fills in the hours that are easy to self-consume for a home that uses electricity all day.
Elderly couples and multi-generational homes
They are home a lot, but the power consumption per person is often not very large, so surplus is easy to produce even if you add capacity. For a multi-generational home, first check whether the electricity contracts are separated by household. If there are two meters, in principle you cannot use electricity generated on one roof in the other household, and the self-consumption you assumed does not materialize. This is information you must tell the installer before design. Also, replacing and inspecting the power conditioner will inevitably occur on a cycle of a decade or more, so agreeing within the family who will decide and bear the cost by then can prevent disputes later.
Possibly moving or renting out within a few years
Because this equipment takes years to pay back, if you expect a short stay, you should think carefully about installing a large owned system. PPAs and leases keep upfront costs down, but the contract term is long, and the handling of early cancellation or a move is spelled out in detail in the contract clauses. Please confirm in writing, before signing, how the equipment contract is passed on when you sell or rent out the building. If you sign without reading this, it limits your freedom to move.
What is common to every pattern is to first estimate whether your daytime consumption is likely to rise. Plans to buy an EV, working from home becoming a habit, and changes in household makeup can shift the self-consumption rate over a few years. Deciding capacity based only on your current life makes it easy to end up with too much or too little later.
Before signing the contract, check in this order
Solar power is not a product you can pick up and compare in a store; it is construction that permanently fixes equipment onto your roof. That is exactly why it is rational to check in the order of "what you can still undo." What follows is a checklist to clear from the top down. It also notes what happens if you go ahead with a mismatch.
- Does the measured roof drawing match the planned installation drawing?First look at the roof plan attached to the proposal. Drawings made only from aerial photos on a web map may omit the positions of skylights, ridge vents, antennas, and snow guards. If these differ from the real roof, after the site survey a change like "it will not fit, so we will reduce the capacity" occurs, and the original estimate loses its basis.
- Orientation, tilt angle, and the effect of shadeCheck whether each roof face's orientation and pitch, and the shade from surrounding buildings, utility poles, and trees, are reflected in the drawings. Even a small area of shade can lower the output of an entire string connected in series. For faces where shade cannot be avoided, ask whether equipment that controls each panel individually can be used. If you skip this, the expected generation falls well short season by season.
- Roofing material, building age, and fixing methodThe installation method differs depending on whether the roof is slate, metal, or tile. Be sure to confirm whether the method drills holes in the roof or clamps with metal fittings, and get the scope of responsibility in case of leaks in writing. If the building is old and you are considering re-roofing within a few years, the natural order is roof first, solar later. In the reverse order, removal and reinstallation costs are incurred separately.
- The combination of panel capacity and power conditioner ratingIf the power conditioner's rating is small relative to the panels' total output, output is capped at the peak of a clear day. This is sometimes done deliberately in design, but what matters is whether the company can explain how much clipping is expected. If the ratio is pushed hard without explanation, the system will not generate as much as the catalog capacity suggests.
- The assumptions behind the generation simulationLook at the basis rather than the annual forecast figure itself: which weather data was used, and how panel degradation, output loss from temperature, and loss from dirt are accounted for. A figure that subtracts no losses at all comes out larger than reality. An estimate with no stated assumptions cannot even be used for comparison.
- Separating what each warranty covers and for how longThe panel output warranty, equipment warranty, workmanship warranty, and leak warranty each have a different issuer and different number of years. Confirm which warranty belongs to whom, and whether paid extension is assumed. If you sign while confusing them, you may hear "that warranty does not cover it" when a problem actually arises.
- Application to the utility and the grid-connection scheduleEven when construction is finished, selling power does not start until the grid-connection procedures are complete. Confirm who applies, how long it takes, and how delays are handled. Also, depending on region and period, you may be subject to output curtailment, so whether the company explains this is another way to gauge its attitude.
- Cooling-off and contract termination clausesIf you signed through door-to-door sales, there is a period during which you can cancel the contract under the law. Finally, check the date the documents were delivered, how to cancel, and how it is handled if work has already started. Signing in a rush without reading this is the most common failure.
A proposal with a condition like "if you decide today" can be designed to make you skip all of the checks above. For equipment that will sit on your roof for a decade or more, there is fundamentally no reason you must decide on the same day.
Warranties, inspections, and contacts: what matters after installation
The trouble with solar is that even when a problem occurs, you do not notice it right away. Panels have no moving parts, so they make no sound, and being on the roof, they cannot be seen. Even if generation is gradually falling, it gets lost in the fluctuation of your electricity bill. That is why it is worth confirming the after-installation support arrangements before signing.
Initial defects are usually found in the first year
Defects caused by installation tend to appear fairly early: poor cable connections, wiring mistakes, power conditioner setting errors, monitor communication faults, and so on. For the first few months after grid connection, record the monitor's generation figures each month. In the first year, when you have no same-season data from the previous year to compare with, using "how high the peak on a clear day is relative to the panel capacity" as a yardstick makes abnormalities easier to notice. If days with an extremely low peak at clear-day noon continue, part of a string may have dropped out.
Think of warranties as three layers
| Type | Issuer | Typical coverage |
|---|---|---|
| Output warranty | Panel manufacturer | Maintaining a certain percentage of output after a specified number of years |
| Equipment warranty | Each equipment manufacturer | Failures of panels, power conditioner, mounting racks, and so on |
| Workmanship and leak warranty | Installer (or the warranty organization it belongs to) | Defects caused by installation, roof waterproofing |
The third layer is where problems tend to arise. Manufacturer warranties remain valid even if a company changes, but a workmanship warranty presupposes that the company continues to exist. In case the installer cannot continue operating, checking whether it has joined a third-party warranty program makes a difference in peace of mind. If it has, keep a record of the warranty's issuer and number and store the certificate.
Returning it is effectively not an option
Equipment that has had holes drilled in the roof, wiring run, and even the utility application completed cannot be returned like an appliance. If you change your mind after signing, all you can use is the statutory cooling-off period for door-to-door sales and similar cases, or the termination clauses in the contract. That is why the stage before construction starts is effectively the final decision point. Remember that even after the construction schedule is set, there is room to stop as long as work has not begun.
Who you contact depends on the problem
When generation drops, when you hear noise from the roof, and when the power conditioner shows an error code, the right party to contact is different in each case. At signing, we recommend getting these three on paper and posting them near your breaker panel: (1) the day-to-day inquiry desk, (2) the manufacturer's support, and (3) the emergency contact (typhoon, earthquake, suspected fire). If a panel is damaged in a disaster, it may keep generating during the day even if it is cracked, and it is dangerous for an amateur to touch. There is a risk of electric shock, so stay away and, as a rule, contact a professional.
How often inspections happen, and whether they are paid or free, differ by company. Even when "free inspection" is advertised, it is common for only the inspection work to be free, while parts replacement and arranging an aerial work vehicle are separate. Check in the contract wording what falls within the free scope.
Reading the numbers and units in a proposal in a form you can compare
Solar proposals are documents that mix units and are hard to compare. Here we organize the frequently seen terms from the standpoint of what to look at when comparing with other companies.
| Term | Meaning | What to look at when comparing |
|---|---|---|
| kW | Instantaneous generating capability (capacity) | Nominal maximum output per panel x number of panels. Determined by how many fit on the roof |
| kWh | Amount of electricity (actual generation and consumption) | Dividing the annual forecast kWh by the capacity in kW puts it in a form comparable with other companies |
| Nominal maximum output | Panel output under standard test conditions | A figure that assumes it will fall below this on a real roof due to temperature rise and so on |
| Module conversion efficiency | The share of received light converted into electricity | Useful when the roof is small. If the roof is large, look at capacity itself |
| Temperature coefficient | How much output falls as temperature rises | The smaller the negative value, the better it holds up in summer |
| Rated output (power conditioner) | The upper limit the power conditioner can send out | Check the ratio to the panels' total capacity |
| Conversion efficiency (power conditioner) | Efficiency when converting DC to AC | Differences between products are small, but it affects losses over the full year |
| Capacity factor | Annual generation divided by what it would be at full operation | An indicator for judging how appropriate the region and design are |
Do not mix up "kW" and "kWh"
This is where people get most confused. kW is capability; kWh is quantity. Calculating annual forecast generation (kWh) ÷ installed capacity (kW) puts proposals with different capacities on the same footing. If one proposal's value is unnaturally larger than the others', ask how much loss they have assumed. Often it is just a difference in assumptions, but whether they can explain it tells you about the quality of the company.
Terms indicating panel cell structure
Terms such as PERC, TOPCon, and HJT indicate the generation of cell structure and surface treatment. Newer generations tend to have an edge in conversion efficiency and temperature characteristics, but they also tend to sit in the higher price range. If your roof is large and can hold plenty of panels, choosing to gain capacity through the number of panels rather than chasing efficiency also makes sense. Note that bifacial panels also receive reflected light on the back, but on a residential rooftop it is hard for light to reach the back side, so you cannot expect as much of a gain as with a ground-mounted installation.
Conditions hidden behind warranty-year figures
Output warranties are written in the form "at least ○% of initial output after ○ years." Without looking not just at the years but also at the threshold below which percentage the warranty applies, there is no basis for comparison. Also, for some products, carrying out periodic inspections is a condition for the warranty to remain valid. The fine print in the warranty certificate matters more than the big numbers for years.
Terms related to the program
- FIT (Feed-in Tariff, a fixed-price purchase program): A program in which the utility takes electricity at a set rate for a fixed period. The rate and period are determined by fiscal year and equipment category.
- Post-FIT: The state after the FIT period has ended. From then on, you choose from the terms offered by various companies.
- Surplus wiring / full-output wiring: For homes, surplus wiring, in which you self-consume and send out only the remainder, is the basic form.
- Output curtailment: A mechanism that temporarily cuts generation to balance supply and demand across the whole grid. Whether you are in an affected area should be stated clearly in the proposal.
Once you have collected several proposals, try lining up just these four items: "installed capacity," "annual forecast kWh," "its assumptions," and "the warranty threshold and years." Without being swayed by the binding or the politeness of the explanation, the differences in conditions become visible.
How to read quotations and how to spot predatory sales tactics
Solar involves large sums, and quotes can differ widely. That is why not taking one company's estimate at face value, and comparing quotations from several companies from the same standpoint, is the most effective thing you can do. When comparing, look not only at the total but also at the breakdown and the assumptions.
- Prepare your own home's numbersUse your meter-reading slip to grasp your annual electricity use and time-of-day pattern, as well as your roof's orientation and area.
- Check the assumptions behind capacity and generation estimatesUnder what assumptions (orientation, shade, degradation) was "○ kWh per year" produced? Check that it is not too optimistic.
- Check long-term costs, including power conditioner replacementIs the payback period based on the upfront cost only? Are replacement and inspection costs included in the estimate?
- Compare what the warranties coverCompare the years and scope of all three warranties: equipment, output, and workmanship.
- Get competing quotes from several companies on the same conditionsWithout matching capacity, panels, and whether a battery is included, comparison is meaningless.
- Do not sign on the spotTake it home when someone rushes you with "if you decide today" or "the subsidy is closing."
Be especially wary of pushy sales. Showing up unannounced and pressing you to sign with "just for now," "monitor price," or "you will definitely recoup the cost" is a pattern that has long been a problem in solar. The claim "you will definitely recoup the cost" is a promise that no one should be able to make, because neither generation nor future electricity prices are certain. The more reputable the company, the more carefully it estimates based on your home's conditions and gives you time to compare several. If you have even slight concerns, do not sign on the spot; check with your family or a consultation service. Door-to-door sales and similar contracts may be cancellable under the cooling-off system within a certain period, and if you feel uneasy after signing, you can consult your consumer center early (nationwide hotline: 188).
Frequently Asked Questions
In the end, will solar pay off for my home?
It varies greatly with each household's conditions. Homes that can fit enough capacity on a sunny roof and use a lot of electricity during the day (a high self-consumption rate) see results more easily. Conversely, with a lot of shade, a small roof, or being away during the day, the effect is weak. Because we cannot say it will "definitely pay off," judge it with an estimate based on your own electricity use and roof conditions.
About how much would a 4 kW system generate in a year?
As a guide only, residential systems are generally said to produce around 1,000 to 1,300 kWh per kW per year, so a 4 kW system would be roughly 4,000 to 5,000 kWh per year. However, this moves predictably with orientation, tilt, shade, and region. Check whether the "○ kWh per year" in your quotation is based on realistic assumptions reflecting your home's orientation and shade.
Which type of panel should I choose?
Monocrystalline types are the mainstream for homes, and high-efficiency types such as PERC, TOPCon, and HJT let you gain capacity on a smaller roof. However, higher efficiency also costs more, so rather than choosing "because it is the latest," it is realistic to choose by whether your own roof area can hold the capacity you need and by cost-effectiveness. If your roof is large and has no shade, there is less need to insist on top efficiency.
Does the power conditioner (conversion device) need to be replaced?
Yes. While panels keep generating for 20 years or more, power conditioners are generally said to need replacement or renewal roughly every 10 to 15 years. An estimate that leaves out this replacement cost tends to make the payback period look shorter. It is important to think not only about "recovery from the upfront cost" but also about long-term costs including power conditioner replacement.
Should I install a storage battery together with it?
Decide after thinking concretely about what you want to run during an outage and how much you use at night. A battery is reassuring for outage preparedness, but it costs a considerable amount in itself. Even when told "buying it as a set is a better deal," installing solar alone first and adding a battery later when you feel the need is also a perfectly realistic order.
Nobody is home during the day. Is it still worthwhile?
There is room to work with. Since generation happens at midday, shifting the dishwasher, washer-dryer, Ecocute, EV charging, and so on into the midday generation hours can raise your self-consumption rate. The key is to move toward running things at midday with timers or a HEMS. If self-consumption still does not rise, using a storage battery as well is also an option.
Are "zero upfront cost" PPAs and leases really a good deal?
The initial burden is small, but during the contract the equipment is not yours, and you may be charged even for what you consume yourself. Compare the total amount, including the contract term, conditions for early cancellation, what happens to the equipment after the term ends, and how a move is handled. Homes with good roof conditions where people live a long time tend to do better with ownership.
Will selling power (FIT) continue to bring in income?
The rates under the FIT program, which purchases power at a fixed price, have been revised year after year. When the purchase period (typically 10 years for homes) ends, you become "post-FIT," and after that the rate drops or you move to a stage of choosing your own buyer. For new installations, it is safer not to rely too much on selling income and to design around self-consumption. Check the latest conditions of the program with public agencies.
How should I deal with pushy companies, or with worries after signing?
When someone presses for an immediate decision with "just for now" or "you will definitely recoup the cost," take it home and get competing quotes from several companies on the same conditions. "You will definitely recoup the cost" is a promise that no one should be able to make. Door-to-door sales and similar contracts may be cancellable under the cooling-off system within a certain period, and if you feel uneasy after signing, do not give up; consult your consumer center early (nationwide hotline: 188).
Are solar panels OK when snow piles up or a typhoon comes?
Standard residential panels are certified as designed to withstand the expected snow load and wind pressure. However, the range they can withstand is set by regional zone, and in heavy-snow or high-wind areas the mounting specifications and installation angle may need to change. Check whether the proposal states design grounds that match your regional zone. If a panel is damaged, there is a risk of electric shock, so do not approach it yourself and contact a professional.
* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.