Bandai Plastic Models 2026: The Complete Guide

Hobbies & Collecting Published: 2026-10-18 27 min read

Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.

Why "finished without painting" became the norm

When talking about Bandai (BANDAI SPIRITS) plastic models, the first thing to grasp is that "just assembling gives you something that looks like a finished model." This was not always taken for granted. Old kits from the 1980s were commonly molded in a single color, and good-looking results assumed that you would paint them. Two technologies overturned that assumption: multi-color molding and the "snap-fit system."

Snap-fit means the parts are designed so that bumps and recesses interlock pin by pin, letting the kit go together without glue. Combined with a design that needs only one pair of nippers, even an elementary school child can finish a three-dimensional model in a few hours. In addition, thanks to multi-color molding, where several colors are poured into one runner (the frame holding the parts), color separation such as a red head, white torso and gray joints is reproduced with zero painting. That is why even a first-time builder ends up with something quite close to the box art. This is the greatest strength of Bandai kits.

This article follows the whole path from buying to building, displaying and enjoying. It covers how to choose a grade, the tools you really need besides nippers, how to improve the look without painting, storing finished models, and smart ways to build your collection. It goes into Bandai-specific circumstances and lists only practical advice rather than generalities.

💡

If you are unsure about your first kit, choose an "Entry Grade (EG)" or an "HG". The part count is manageable, and some EG kits are even designed to go together without tools. Finishing one kit first and tasting the satisfaction of "getting it done" is the surest shortcut to sticking with the hobby.

Think of Gunpla grades as a "ladder"

Bandai plastic models roughly divide into Gunpla (Gundam series) and other character hobby lines. Gunpla in particular has its own grade system, and if you understand it as a "ladder you climb from the bottom," you can see where you are now and what to move on to next.

GradeMain scaleCharacterApproximate build time
EG (Entry Grade)1/144 and othersAn entry level that can be built without tools. Color separation is kept minimal30 minutes to 1 hour
HG (High Grade)1/144The standard. A good balance of articulation, color separation and price, with the largest number of kits2 to 4 hours
RG (Real Grade)1/144Small, yet with an internal frame. Dense and delicate4 to 8 hours
MG (Master Grade)1/100Reproduces even the inner skeleton. Substantial size and impact when finishedHalf a day to 1 day
PG (Perfect Grade)1/60The top tier. Some have light-up features, and builds take dozens of hoursDozens of hours

There is a standard order for climbing the ladder. Many people follow this flow: "finish one favorite HG kit, then try dense assembly with RG, then discover the fun of the internal frame with MG." RG is the same 1/144 as HG in size, but its structural precision is completely different, and with RG as a first kit the sheer number of small parts can be overwhelming. PG, on the other hand, is best kept as a "final goal," since tackling it right away tends to lead to giving up. If you think of grades as lined up not by price but by "build density," you will make fewer wrong choices.

Another pitfall is mixing scales. HG and RG are both 1/144, so they stand at matching heights side by side, but mix in MG at 1/100 or PG at 1/60 and the same mobile suit ends up in different sizes on your shelf. Collecting the same mobile suit in different grades to compare is an advanced pleasure, but at first, matching scales keeps your shelf neater.

Not just Gunpla: sibling series worth knowing

The image of "Bandai plastic models = Gundam" is strong, but there are other well-developed series that use the same snap-fit technology. If you already know which work or character you like, these may appeal to you even more, so let's cover the main ones.

  • Figure-rise Standard (FRS): A series that turns characters from Dragon Ball, Naruto, Demon Slayer and more into three-dimensional kits with the same assembly style as Gunpla. You attach limbs to a base body and fit on color-separated clothing parts, giving a distinctive fun of building a human figure.
  • Figure-rise Mechanics: A sort of "anatomical model" that reproduces a character's skeleton, muscles and internal structure. The outer parts come off to show what is inside, making it an unusual series that you can display that way.
  • 30MM (30 MINUTES MISSIONS): A series built around customizing, where you freely recombine parts from different kits to make original mecha. It is inexpensive and the connection standard is shared, so you can create your own machine by combining two or three kits ("nikoichi" or "sankoichi"). Ideal as an introduction to modifying kits.
  • 30MS (30 MINUTES SISTERS): The pretty-girl branch of 30MM. The main way to play is to swap outfits, hairstyles and weapons to create an original character, and there is a wide choice of face parts too.
  • BB Senshi and SD Gundam: A series that deforms Gundam into a two- to three-head-tall style. The parts are large and few, and the target age is lower, so they suit a young child's first box.

What these have in common is that "the standards are partly compatible." In particular, 30MM and 30MS share the same joint diameter, so arms and weapons from another kit can be swapped in as they are. Being able to enjoy a "build with no right answer" is another appeal that differs from Gunpla.

Start with just nippers, and add more as you want them

You do not need to "buy every tool at the start" at all. In fact, buying too much raises the cost and becomes a reason to give up. What you truly need first is just one pair of nippers. From there, buying one more item at a time when you become dissatisfied with the results is the way to keep going, both financially and emotionally.

How to gather tools, step by step

  1. First, one pair of nippers (essential)A tool for cutting parts off the runner. You can build with a 100-yen shop pair, but it tends to cause "stress whitening," where the cut surface turns cloudy white. Hobby thin-blade nippers give cleaner cuts and clearly improve the finished quality. Avoid nail clippers and general-purpose nippers, as they can crack the parts.
  2. Clean up the cuts (the next step)Use a hobby knife or utility knife to shave off the gate marks (small nubs) left on the parts. This alone tightens up the look of a straight build. Tweezers are reassuring for fine sticker application and handling small parts.
  3. Aim for the transformation of a straight build (the two best-value items)A panel-lining pen (gray or black) that runs color into grooves to create shading, and a matte top coat that removes the surface shine. These two are the stars that lift a kit to a finished-model look even without paint.
  4. Step into partial painting (optional)With a fine detail brush and a broad flat brush, you can do "partial painting," painting just the inside of thrusters or the sensors. A single brush of accent can be your first step into the world of painting.
  5. On to full painting (once the hobby deepens)An airbrush paints without unevenness, but it also needs a compressor and the cost mounts. Don't rush here; the right move is to buy it once the image you want to build becomes concrete.

Incidentally, current Bandai kits basically need no glue. However, flow-type cement helps with older kits, garage kits, and repairing spots where parts have become loose. It is enough to remember it as "not needed at first, but it will have its turn someday."

💡

If you are unsure about your first purchase, get these four: the kit itself, hobby thin-blade nippers, a panel-lining pen (gray), and a matte top coat. That alone gets you a finish that feels properly built, even without paint. You can add the rest as you feel the need while building.

Assembly transforms once you learn the "double cut"

Bandai's instructions have very careful illustrations and are designed so that following the numbers in order naturally leads to a finished kit. That is exactly why sloppy cutting from the runner lowers the finish more often than mistakes in the assembly itself. One tip solves almost all of this.

That is the "double cut." If you try to cut right at the gate (the thin section connecting the part to the runner), the pressure of the nippers has nowhere to go and causes stress whitening or dents on the part side. So first cut a little outside the gate to free the part, then shave off the remaining gate mark with a hobby knife. Just this dramatically reduces whitening on the cut surface and makes even a straight build look like a different model.

Keeping the viewpoint of enjoying things while you build adds depth to the hobby. With large kits such as MG and PG, I recommend taking photos of the internal frame alone before putting on the outer armor. Recording the precise skeleton that will never be visible again once finished makes a real difference in satisfaction when you look back later. If you change poses midway to check the range of motion, or temporarily attach weapons to see the impression, your motivation will not run out before completion.

It also helps to know the snap-fit-specific "looseness" if you want to live with your kits for a long time. The polycaps in the joints wear out as you move them repeatedly, and they may stop holding poses. In that case, apply a thin coat of clear nail polish top coat to the pin and let it dry, and friction often returns. Conversely, for spots that are so tight that they won't come off, prying forcibly will crack them, so handle them carefully by warming them, for example.

You don't have to paint, but the "two steps" are worth trying

To repeat, Bandai kits look good enough as an unpainted "straight build". The molded colors alone reproduce the main color separation, and with the included stickers (or water-slide decals) even lettering and markings are complete. So there is no need to brace yourself thinking "painting is a must."

Even so, what I most want people who don't paint to try is the two steps of panel lining plus a matte top coat. Panel lining is a technique of running black or gray into the grooves to create shadow and deepen the three-dimensional feel. Spraying matte spray over the whole kit removes the shine typical of plastic and gives a calm, matte texture. Just adding these two often changes the impression so much that it can be mistaken for a painted model. Since it can be done with a dedicated pen and a spray, you can try it today even with zero painting experience.

If you want to go one step further, try partial painting. It is a method of painting only "just here" instead of the whole kit, and even a small accent, such as gold inside the thrusters or green on the sensors, raises the class of a finished model. It takes only one brush, so the barrier is low. Beyond that lies the world of full painting, where the techniques extend endlessly: choosing colors, painting order, masking, gradation, and weathering (adding dirt). However, this is a "deep hobby" that needs different tools and practice. Painting can be redone, so when you start, don't fear failure and begin with a small area.

The enemies of a finished model are "sunlight, humidity and dust"

To keep a hard-won finished model beautiful for a long time, where you display it and how you store it matter. Plastic is vulnerable to ultraviolet light, humidity and dust, and just handling these changes the speed of aging considerably.

Direct sunlight is the biggest enemy. Placed by a window, molded colors can fade in a few months and white parts can yellow. Vivid white, blue and red in particular discolor easily under ultraviolet light, so inside a shelf or somewhere you can block light with a curtain is ideal. Against dust, an acrylic case (clear case) works best. It tightens up the look and reduces the effort of wiping. Putting a desiccant (silica gel) in the case also helps prevent deterioration from humidity.

To give expression through display, use an Action Base (display stand). Even if the joints loosen and the pose sags, supporting it with an official Bandai Action Base lets you recreate movement that a model sitting on a shelf cannot show, such as floating or flying poses. For arranging on shelves, the basic choices are "line up by grade and scale" or "group by the world of the series." Installing an LED strip from above makes the shadows stand out beautifully at night.

💡

For long-term storage, keep finished models in a dark place with low humidity. Spraying a matte top coat beforehand can suppress minor scratches and discoloration during storage to some degree. The same goes for unbuilt kits (on the runner): avoid high heat, humidity and direct sunlight. The older the kit, the more brittle the runners, so handle them carefully.

Smart collecting: money advice for not growing your "tsumi-pla" backlog

Now to buying kits economically. However, specific prices and point-back rates keep changing by season and store, so here I will only organize the way of thinking. Be sure to check the latest prices and campaign conditions on each online shop's or store's official page.

First, the basics of buying. Point-back online shops regularly run point-boost promotions, and buying several kits together has the savings effect of paying shipping just once. At electronics retailers and hobby specialty shops you may also get point-card rewards. The real cost can differ by where you buy the same product, so making a habit of comparing Rakuten Ichiba, Yahoo! Shopping, Amazon and retailers side by side naturally makes you less likely to lose out. Point-back rates and annual fee conditions change easily, so rather than assuming, it is safest to check each official source each time.

However, bulk buying has a side effect. That is the "tsumi-pla": a mountain of unbuilt kits that piled up because you bought them and never assembled them. If you grow it impulsively with "it's on sale" or "it's limited," your building pace cannot keep up. A simple but effective rule is "finish the current kit before buying the next." Just imposing this on yourself keeps the backlog down considerably.

Two "special features of where you buy" are worth knowing as Bandai-specific circumstances.

  • The existence of old kits: Gunpla from decades ago is sometimes still sold in kit form today. Their precision and articulation are inferior to the latest kits, but they are easy to get and popular as material for modification and customizing. However, they can be difficult for beginners, so it is safer to first learn the basics with the latest kits.
  • Premium Bandai (limited items): On the official online shop "Premium Bandai," limited kits that are not sold through general distribution are sold by order. The order period is short and the items tend to become hard to get after it closes, so if you have a target, register as a member and set up new-product notifications. Shipping often takes several months, so leave room in your budget and schedule when you order.

For limited items, rather than rushing around searching, waiting for a "re-release" is often the calmer choice. Popular kits tend to be re-released, so if certainty matters most, waiting for the next distribution is also a smart move.

The best time to buy Gunpla is decided by the re-release calendar

Bandai plastic models do not move like home appliances or smartphones, where "older models get cheaper when a new one comes out." If anything, the opposite is true: popular kits disappear from shelves and you wait months to years for the next re-release. So it is more practical to think about when to buy not as "waiting for the moment it gets cheaper" but as "not missing the moment it becomes available."

Re-releases come in "waves": keep weekly arrivals in mind

Gunpla is not only released on new-product launch dates; existing kits are also regularly reproduced (re-released). At many model shops, arrival days tend to cluster on particular days of the week, and regulars make a habit of "going to look on that day." Even for online shopping, arrivals of re-released stock vary from a few days to a few weeks by shop, so checking several retailers raises your chances of catching one more than staking out a single shop.

In particular, old kits and ones that have not been re-released in a long time can sell out within hours of arriving. Conversely, standard HG mobile suits (such as the mass-produced Zaku or GM types) are re-released quickly and come around again even if you don't rush to secure them. Telling "a kit that can wait from a kit that can't" is the first step to not growing your backlog.

Supply and demand move with anime broadcasts and theatrical releases

When a new anime or film gets going, kits of related mobile suits go out of stock all at once. From just before broadcast starts until several months afterward, even older-series kits in the same lineage (for example, another version of the same protagonist's machine) can move in tandem. This is not about discounts but about "stock getting thin," and if the machine you want is tied to a hit work, it is calmer to secure it before the excitement builds.

Conversely, after the buzz has passed, re-releases come and the kits return to shelves. If you are in no hurry, aiming for when the heat has cooled is a perfectly reasonable decision.

Grade generation changes happen "quietly"

Even for the same mobile suit, HG kits differ completely in design philosophy by era. An HG from more than 10 years ago and a recent HG are different in both range of motion and color separation. Popular mobile suits may get a newly designed version every few years, and the old version may continue to be sold alongside it or quietly stop being re-released. When buying a standard mobile suit for the first time, looking at the sequence of product numbers and choosing the newer one tends to give higher satisfaction in terms of ease of building.

💡

MG has clearly separate generations for the same mobile suit, such as Ver.Ka and Ver.2.0. If the long names confuse you, check the version notation at the end. Newer is not necessarily "better": Ver.Ka has a meticulous design and more parts, so the assembly is harder.

Seasonal peaks: summer vacation and the New Year holidays

Demand for models rises when people have a block of free time. Around summer vacation and over the New Year holidays are times when things move quickly both in stores and online. If there is something you want to build in this period, it is safer to secure it one to two months ahead rather than at the last minute. The same goes for tools and paints; "nippers were sold out on the day I decided to build" is a surprisingly common story.

With Premium Bandai, the deadline is everything

Made-to-order limited kits are not on sales floors in the first place. The rule is simple: once the order period deadline passes, you cannot get it, so if something catches your eye you need to decide when it is announced. It is normal for several months to pass between order and shipping, so if you plan your schedule on the assumption that it will "arrive just when you have forgotten you ordered it," you can wait calmly.

💡

Limited kits are an area where you are easily pushed by "if you miss it, there won't be another." However, in many cases they are color-change or partial-parts-addition variations, and the regular version that serves as the base kit can be bought normally. Considering once whether you can get close with paint before deciding will reduce regrets.

What gets you stuck if you buy only the kit, and what can actually wait

Because it is snap-fit, it is true that "you can build it with just the box," but that is on the premise that you have nippers. Here I separate what you should have ready with your first box from what is often recommended but not urgent.

Things that will stop you the same day without them

  • Nippers for plastic models — Stationery nippers or nail clippers can cut, but the cut surface is crushed white. Single-edge, thin-blade ones are sold for modeling. As a first tool, there is almost no reason to hesitate.
  • A hobby knife or file — Even with a double cut, a little of the gate mark remains. You need either to lay the blade flat and stroke it, or to lightly smooth it with sandpaper.
  • A catch dish or tray for working — Cut-out parts roll away surprisingly easily. A shallow box or a 100-yen shop parts tray is enough, but without anything you will spend longer searching for parts on the floor.
  • Bright light at hand — With only room lighting, telling the part numbers in the instructions from the real parts gets difficult. With MG and above especially, there are many runners and more occasions to read tiny markings.

Not urgent, but you will want them by the second box

  • A Gundam Marker for panel lining (wipe-off type) — The most cost-effective single item for changing the look of a straight build by a notch. If it spills over the line, you can undo it with a dedicated eraser pen or an eraser.
  • Matte top coat (spray) — It removes the cheap-looking plastic shine and makes sticker edges less noticeable. However, you need to be outdoors or somewhere ventilated, and on humid days it can go cloudy white, so you need not hurry until you have the right environment.
  • Tweezers — Needed at the stage of applying foil stickers. RG's fine stickers in particular are a size that is hard to align with fingers.
  • Stands (Action Base types) — Essential if you want to display a flying pose, but unnecessary if you only display it standing. Some kits need dedicated connector parts, so checking the compatibility chart before buying is the surest way.

Often recommended, but low priority at the start

ItemWhy it can wait
Full airbrush setWait until you decide to do full painting. It involves equipment including a compressor and a paint booth, and has no use at the straight-build stage.
Big paint setsThey tend to harden unopened after you buy them. Start with just a few colors for spots you want to hand-paint with a brush (inside the thrusters, mono-eye, and so on).
Dedicated glueBasically not used with snap-fit kits. Wait until you move on to modifications or removing seam lines.
Expensive multi-stage file setsA few sheets of sandpaper in different grits and a sponge sanding stick will do for now.
Large cases for storing runnersThinking about where to put finished models comes first.

In fact, "space" is the most important necessity

What is surprisingly overlooked is the desk you work at and the shelf where finished models go. Even one HG, with its arms spread, is bigger than your palm, and an MG or PG takes up a whole shelf of a bookcase. Before adding tools, try imagining where finished models will be lined up. If this isn't decided, finished models pile up on the desk, there is no room to build the next one, and as a result your backlog grows.

💡

The stickers included in kits come in two kinds: foil stickers (with a metallic-luster base) and plain adhesive stickers that are not water-slide. Both stick less well if finger oil gets on them, so just washing your hands before applying them makes them last considerably longer.

Missing or broken parts: what Bandai support can fix

Unlike home appliances, the idea of "exchange for an initial defect" is not widely known for plastic models, but Bandai does have a proper contact point. Whether you know this or not makes a considerable difference in how discouraged you feel when trouble hits.

First, when you open the box, count the runners

At the start of the instructions is a list of the runners included in that kit. Make it a habit to lay out the bag contents and check that A, B, C and so on are all there before you start building. If you notice "there's no D runner" partway through, the time spent until then is left hanging. This is especially likely with MG and PG, which have many runners, and with large kits split across several bags.

For missing or defective molding, go to the manufacturer's contact point

Manufacturing defects such as a missing runner, a part that was only partly molded (a short shot), or a part torn off because the gate position is wrong are matters to bring to Bandai's customer service center. Here are the things that speed things up if you have them at hand when you contact them.

  1. Product name and product numberThese are printed on the side of the box and near the barcode. Even for the same mobile suit there are many grade and version variations, so the name alone cannot identify it.
  2. Runner letter and part number of the missing or defective partThese are assigned in the instruction's parts diagram, like "B-12." Telling them this number is the surest way.
  3. Lot numberIt is sometimes stamped or printed on the edge of the runner or on the box. It is a clue if the same defect is concentrated in a particular production batch.
  4. Proof of purchaseA receipt or order history. You may not be asked for it, but having it ready avoids having to redo things.

If you broke it yourself, "parts requests" are a separate path

If the cause is not a manufacturing defect but that you broke a part while building, sanded it too much, or lost it, there is a paid parts sale system. Parts are often not sold singly but by the runner, and the conditions, including how shipping and handling fees are treated, vary by period. Either way, "once it's broken, it's over" is not true, so do not throw away broken parts; keep them.

However, for made-to-order limited kits and kits whose production ended long ago, there may be no parts stock left at all. When building Premium Bandai limited items especially, it is worth proceeding carefully on spots that take force (snapping joints together, inserting polycaps).

Separating this from cases to raise with the retailer

What happenedWho to contact first
The box is crushed / the box arrived wetThe shop or online store where you bought it (a shipping problem)
A different kit from the one you ordered arrivedThe shop where you bought it
One runner is missingThe manufacturer's contact point (going through the retailer is also fine)
A part is chipped or deformedThe manufacturer's contact point
Stickers are printed out of alignmentThe manufacturer's contact point
You broke or lost it yourselfThe manufacturer's parts sales contact point (paid)
💡

With "kits that show signs of having been opened" obtained through flea market apps or auctions, it is hard to check for missing runners, and manufacturer support also struggles to proceed without proof of purchase. Old kits especially are, in the end, safer to buy from authorized retailers.

Convey it as "providing information," not as a complaint

Inquiries get settled faster if you lay out the facts matter-of-factly rather than in a blaming tone: "which kit, which runner, which part, and in what condition." If you have these four, the other side will judge the rest. If the contact point accepts photos, photographing the part together with the relevant instruction page prevents misreading the numbers.

Beginner mistakes, avoided in advance

Here are the situations where people who have just started tend to stumble, paired with causes and fixes. Just knowing them prevents most of these.

  • Cutting the gate in one go and damaging the part → Make the "double cut" a habit: cut once a little outside the gate and deal with the remainder using a hobby knife. Not rushing is the best approach.
  • Pressing parts in facing the wrong way → Snap-fit parts can be hard to remove once fitted. Check "front and back, top and bottom" in the instruction diagrams before pressing them in.
  • Stickers crooked or lifting → They are hard to reapply, so hold the edge with tweezers, decide the position, and then place them slowly. For water-slide decals, using a decal softener improves the fit.
  • Loose joints that won't hold a pose → The cause is polycap wear. Applying a thin coat of clear nail polish top coat to the pin restores friction. If it doesn't improve, there is also the option of a joint reinforcing agent.
  • Stress whitening (cut marks turning white) → The main culprit is forcing cuts with cheap nippers. Make careful double cuts with hobby thin-blade nippers. Light whitening can be smoothed with fine sandpaper.
  • A growing backlog you can't get through → To break the chain of impulse buying, the rule of "finish the current one before the next" is effective.
  • Layering paint without waiting for it to dry → If you layer before the underneath dries, the paint film dissolves and goes uneven. Water-based paints dry fast and suit beginners, but even so, wait long enough.

FAQ

Which Gunpla grade should I start with?

The best balanced is "HG (High Grade)." Part count, articulation and color separation are well matched, and most popular mobile suits come out as HG, so it is easy to pick your favorite. If you want to finish as quickly as possible, start with "EG (Entry Grade)." For RG, MG and PG, the safest order is to get a feel for things with HG and then climb one step at a time.

Both are 1/144, so what is the difference between HG and RG?

Even at the same scale, the "build density" is completely different. RG packs an internal frame and fine parts into a small body, with far more steps and tiny parts than HG. The detail when finished is superb, but RG as a first kit can overwhelm you with its fineness. I recommend learning the flow with HG and then moving on to RG.

Does it look good without painting?

Yes. Current Bandai kits reproduce the main color separation with molded colors, and just applying the included stickers raises the finish. Add the two steps of panel lining (running color into the grooves) and a matte top coat (removing the shine), and it can look so good that you might mistake it for a painted model. Make finishing one straight-built kit your first goal.

Do I need glue?

Most current kits use the snap-fit system, so it is basically unnecessary. The parts go together just by pressing them in. However, flow-type cement can help with older kits, garage kits, and repairing spots where parts have loosened. There is no need to buy it at first; getting it once you feel the need is enough.

What is fun about customizing with 30MM and 30MS?

The real appeal is that 30MM and 30MS share standards such as joint diameter, so arms, legs and weapons from other kits can be swapped in as they are. You can combine several kits ("nikoichi") to make your own original mecha or characters that are not in any manual. With no right answer, there is a lot of freedom, and it is an easy series to use as an introduction to modifying kits.

Can I build with my child? From what age?

Kits list a target age, and EG and lower grades are often 8 and up. For lower elementary school children, EG, SD Gundam and BB Senshi are recommended, because the parts are large, fewer and easy to handle. Nipper tips are sharp, so when a small child uses them alone, an adult should stay beside them for support. It also suits as a craft that builds concentration and spatial awareness.

How do I get Premium Bandai limited items?

The surest way is to register as a member on the official "Premium Bandai" site and set up new-product notifications and the newsletter. Limited items can be bought at the list price if you order within the order period, but they become hard to get once it closes. Shipping often takes several months, so leave room in your budget and schedule. If you miss out, waiting for the next re-release is also a calm choice.

Where can I buy tools and paints?

You can get them at the hobby corners of retailers such as Yodobashi Camera, Bic Camera and Joshin, at model specialty shops such as Tam Tam and Yellow Submarine, and online at Amazon, Rakuten Ichiba and others. Hobby nippers and paints have a small selection at ordinary 100-yen shops, so specialty shops or online are the surer bet.

Is it OK to leave a kit unfinished for a long time?

If you store it midway, avoid dust and direct sunlight, and sorting parts by section into small bags or trays so they don't scatter makes things easier to manage. Be careful, because high heat and humidity risk deforming or discoloring the plastic. Small parts are easy to lose, so if possible, keeping them on the runner (uncut) makes parts easier to manage.

The instructions say "cut off with nippers." Can I use nail clippers or scissors instead?

Cutting itself is possible, but the cut surface is crushed white and stands out. Scissors in particular pinch and crush the part between the blades, so large gate marks tend to remain. Even entry-level hobby single-edge nippers clearly change the finish, so I can recommend one as the first tool to get.

HG kits of the same mobile suit come in several versions. Which should I choose?

The newer the product number, the more likely the range of motion and color separation have been improved. If the box carries a notation such as "REVIVE," it is a newly designed version. However, some equipment and variations exist only in the older version, so if you prioritize ease of building choose the newer one, and if you want a particular form choose the older one.

I ordered a kit from Premium Bandai, but I no longer want it before it arrives. Can I cancel?

For made-to-order items, it is generally treated as not cancellable in principle after the order period deadline. Before the deadline, you may be able to do it from your order history. Since several months often pass before shipping, thinking once at the time of ordering about "whether I will build it by the time it arrives" makes it less likely to cause trouble later.

* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.