Choosing Headphones and Earphones: Form, Features and Smart Buying

Price Cycles by Category Published: 2026-10-18 28 min read

Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.

Every price tier of earphones and headphones is its own market

Earphones and headphones sound like one category, but an entry-level model at a few thousand yen and a flagship at several tens of thousands compete on completely different things. At the entry level, the goal is simply to play music wirelessly without fuss, so fit and how easy the case is to use decide it. Move up a tier and the contest is about things you only see by reading the catalog closely: how well the noise canceling works, which codecs are supported, and whether spatial audio is included. That is why buying whatever sits near the top of a popularity ranking can leave you paying for features you never use.

There is another quirk specific to this category. Major makers refresh their lineups roughly every two to three years, so the same budget buys a different generation depending on when you shop. Right after a new generation appears, the previous one tends to become a bargain, while the newest model right after launch rarely moves in price. In other words, which product to choose and when to buy it cannot be separated. This article walks through the generations of real, representative series and covers form, features, codecs and timing together. Prices shift by season and by store, so only rough ranges are given here. For actual amounts, please check the listings on each shopping site or the official pages.

💡

A suggested reading order: first narrow down the basic form by where and how you will use them, then judge whether you need a higher tier by looking at noise canceling and codecs, and finally time your purchase with generation cycles and sales. These three steps lead you to a pair that is neither too much nor too little.

Four types by how you wear them, and a representative line for each

Models fall into four broad types. Each suits different situations, and the representative series have their own niches. The price range is only a guide to roughly where each type competes.

TypeBest forRepresentative lines (examples)Price range guide
True wireless (in-ear canal type)Commuting, school, everyday useSony WF series / AirPods Pro / Bose QuietComfort Earbuds / Anker Soundcore LibertyWide range, from entry level to high end
True wireless (open-fit inner-ear type)People who want to avoid a feeling of pressure when worn for long periodsStandard AirPods / some more open-style modelsMostly mid-range
Over-ear headphonesCareful listening at home, working from homeSony WH-1000X series / Bose QuietComfort (headphones) / AirPods MaxMid-range to high end
Bone conduction / open-earRunning, listening while doing other thingsOpen-ear models such as Shokz OpenRun / OpenFitMostly mid-range

In-ear canal type (earplug style): the mainstay for isolation and bass

Canal-type earphones sit firmly in the ear canal, which physically blocks outside sound and pairs well with noise canceling, so they are now the mainstream form of true wireless. Sony's WF series, Apple's AirPods Pro and Bose's QuietComfort Earbuds belong to this group, and all of them emphasize sound isolation and a full bass. The downside is that the fit varies from person to person. The range of ear tip sizes included, and whether tips of different shapes are provided, make a big difference to how well they fit.

Inner-ear type: a way out for people who dislike pressure

Inner-ear earphones rest on the ear rather than sealing it, and the standard AirPods are the best-known example. Because they do not close off the ear completely, they are less likely to feel stuffy or closed in over long sessions, and some surrounding sound comes through. They are structurally weak at isolation and strong noise canceling, but they are a strong option for anyone who just cannot get along with canal types, or who wants to hear family voices at home.

Over-ear headphones: stay-at-home immersion and all-day comfort

Over-ear headphones cover the whole ear, and their larger drivers give them an edge in soundstage width and bass extension. Sony's WH-1000X series, Bose's QuietComfort and Apple's AirPods Max sit in this tier, and they are also a standard choice for focusing while working from home. They are bulky to carry, but because the pressure is spread out, the ear canal is less likely to hurt even after hours of wear.

Bone conduction / open-ear: the idea of not covering your ears

Bone conduction sends vibrations through the cheekbone, so your ear canal stays open. As Shokz's OpenRun shows, it suits people who run or cycle and do not want to miss the sound of cars or people nearby. More recently there are also open-ear models, including ear-cuff types, with a small speaker placed in front of the ear. They give a more natural sound than bone conduction for listening while you do other things. Neither type matches in-ear or over-ear models for bass or isolation, but if you accept that trade-off for a specific purpose, they are comfortable to use.

Two features that set models apart in the catalog: noise canceling and codecs

Once you know the form you want, the next question is whether to step up a price tier. Two things help you decide: the quality of the noise canceling (ANC) and the supported codecs. Both are typical cases where the numbers and names are printed but it is hard to tell what actually differs, so let us unpack them here.

Noise canceling differs in which sounds it removes, and how much

ANC is good at removing low, droning sounds (the rumble of trains, airplanes and air conditioning) and less good at mid and high frequencies such as human voices. Flagship models (the top-end Sony WF/WH, Bose QuietComfort series, AirPods Pro and so on) cut deeply into those low frequencies, and the quiet is clearly noticeable even on city streets. Entry-level models that advertise ANC, on the other hand, may work more mildly or pick up wind noise easily. A realistic dividing line is this: if you ride trains every day or fly often, a higher tier is more likely to be worth it, and if you mostly stay in quiet rooms, there is no need to stretch. Many higher-end models switch between ANC and ambient sound with a single touch, so check how easy that is to operate as well.

What a codec means depends on your phone

Wireless audio is compressed before it is sent, so the supported codec determines how much sound information gets through. The tricky part is that the benefit only appears if both the earphones and the phone support the codec.

CodecMain supportRough positioning
SBCAlmost all devicesThe standard. Sounds fine even if it is all a device supports
AACWorks well with iPhoneiPhone users should check this first
LDACMany Android phones / Sony devicesHigh bitrate with more information. Pays off on Android
LE Audio(LC3)Between newer devicesLow power use, supports Auracast. The standard going forward

The point is simple. Look for AAC support if you have an iPhone, and for LDAC support if you use Android and care about sound quality, and you will not go wrong. Conversely, even if a product advertises LDAC, you will not get the benefit on an iPhone, so do not be pulled too far by the specs. The newer LE Audio / Auracast is a standard expected to allow things like receiving audio broadcast to everyone at public facilities and airports, and compatible devices are only now starting to increase. If you plan to use your pair for a long time, keeping it in the back of your mind will make your next replacement easier to decide.

📌

Spatial audio (a feature where the sound follows your head direction through head tracking) is also a highlight of the higher tiers, but it only works when the streaming service or video content supports it. It is of great value if you often watch movies or listen to supported tracks, but if you mostly use earphones as commute background music, it is not a deciding factor.

What “LDAC”, “IPX4” and “20 hours (with case)” on the spec sheet mean

An earphone product page is packed with numbers and abbreviations, and it is hard to tell which of them matter for your own setup. Here is a rundown, notation by notation, of what to actually look at when comparing.

The codec line only works when both sides support it

You will see names like SBC, AAC, aptX, aptX Adaptive, LDAC and LC3, but only a codec that both the sending side (phone or PC) and the receiving side (earphones) support is actually used. iPhones have long supported only SBC and AAC, so even if you buy earphones that list LDAC, they play in AAC on an iPhone. Conversely, many Android phones have LDAC, but depending on the model and OS settings the default may still be SBC, and it can be changed in the codec setting under developer options. Read a mention of LDAC support as the upper limit you can reach when the conditions are met.

Next to LDAC you may see a figure such as 990kbps. That is the maximum bitrate under the best conditions, and in a crowded radio environment it drops automatically to a lower step (660/330kbps). Many models also have a connection-priority / sound-quality-priority switch in the app, and locking it to sound quality makes dropouts more likely.

Read the IP rating as two parts: dust resistance and water resistance

The X in IPX4 means no dust test was carried out (it is not stated), not that dust resistance is zero. The number after it is the water rating: 4 covers splashes, 5 covers jets of water, and 7 covers tests that assume temporary submersion. As a rough guide, 4 or higher is enough for sweat and rain, and 5 or higher if you also think about showers or rinsing under a tap. If both digits are present, as in IP55, it means the product has also been tested for dust.

One point to watch: for many products, the rating applies to the earbuds only and does not cover the charging case. If the case is not rated, putting sweaty earbuds straight back in may affect the contacts.

Playback time differs by ANC on or off, and with or without the case

NotationHow to read it
8 hours for the earbudsFrom a full charge until the earbuds alone run out. Often a figure with ANC off and AAC assumed
24 hours with the caseThe total including the charge stored in the case. It is not the continuous playback time of a single session
X hours with ANC onThe figure while noise canceling is running. It is normally shorter than with it off
X hours from a 10-minute chargeA guide for quick charging. It cannot be used if the case itself is empty

Even with the same 24 hours, a model that lasts long on its own and one that gets there through case capacity are used differently. For a round trip commute the latter is fine, but on a long flight or a day of back-to-back meetings at home, the continuous playback time of the earbuds alone matters more.

Driver size, frequency response and impedance

A driver size such as 10mm dynamic tends to give more bass the larger it is, but the size alone does not decide the sound quality. Frequency response figures such as 20Hz to 40kHz often do not state the sound pressure at which they were measured, so they are not a good yardstick for comparing models. Because 40kHz as an upper limit is one of the conditions for the Hi-Res logo, some are listed simply to support that label.

For the impedance (ohms) you see on wired headphones, a larger number means more voltage is needed to drive them. Up to a few tens of ohms is practical straight from a phone, but models in the hundreds of ohms need power from an amplifier, so consider them together with the player you already own.

💡

Multipoint support means the earphones can stay connected to two devices at once, but the number of devices and whether it can be used together with a high-quality codec such as LDAC vary by model. If you switch between a PC and a phone, check not only whether it is supported but also whether there is a note saying the codec is limited during multipoint use.

The IP rating and a secure fit to look for in exercise and outdoor use

If you use them at the gym, for running, or on rainy commutes, it is reassuring to check the IP rating, the indicator of water and splash resistance. It is written like IPX4, and the larger the number after it, the better it resists water.

Example notationRough meaningSuitable for
IPX4Withstands splashes from any directionSweat while running, light rain
IPX5〜IPX7Withstands jets of water and temporary submersionIntense exercise, heavy rain
IP5X/IP6XDust resistance (the first number)Dusty, sandy environments
No rating shownNot designed with water in mindMainly indoor, dry settings

One thing to watch: even when the earbuds are waterproof, the charging case often is not. Putting sweaty earbuds straight back in the case can cause contact problems, so wiping them lightly before storing them will make them last longer. Also, IP ratings are tested with fresh water, and sweat or seawater, with its salt and other components, puts a different kind of strain on a product. It is safer not to put too much faith in the rating number alone.

For exercise there is one more factor: how well they stay put. For canal types, it comes down to whether there are wings or hooks that catch in the hollow of the ear; for bone conduction and open-ear types, how stable the band around the ear is. Sweat makes things slippery, so if you can try them in a store, give your head a light shake, and look for reviews from people who use them for sports.

Reading the best time to buy from the generation cycles of major series

Price changes in this category come from two waves overlapping: new generation announcements by the makers and sales on online shopping malls. Let us first get a feel for the generation cycles.

  • Sony WF / WH series: Top models tend to be updated roughly every two to three years. When a new generation comes out, the one before tends to become a bargain, and if the feature gap is small, the previous generation is often the one to aim for.
  • Apple AirPods series: Discounts are not large, but older models sometimes move around the time a new model is announced. In normal times, it is realistic to line up a purchase with point rewards or gift seasons.
  • Bose QuietComfort series: When a model is replaced, the previous one tends to move as stock clearance. If ANC is your goal, the previous model is often just as satisfying.
  • Anker Soundcore and similar brands: Updates are fairly quick, and in the value tier the effective price during sales can drop considerably. If you are looking at entry to mid-range, waiting for a sale is well worth it.

On top of that, seasonal factors help with timing. The end-of-year and New Year period, big sales on shopping malls, and times when point rewards are generous suit buying a previous-generation unit. During the new-life season in spring and the gift-giving periods, bundles and special features tend to appear, so your options widen. By contrast, the newest model right after launch is slow to move in price, so if you do not need the latest, aim for the previous generation just after a new one comes out; if you do want the latest, aim for it during a big sale combined with point rewards, and you will end up with a purchase you feel good about.

💡

Once you find a model you like, keeping an eye on how its price has been moving for a while beforehand makes it easier to judge whether the sale price is really a good deal. If you use favorites and price comparison to learn the usual price, you are less likely to be swayed by the sale display.

Smart buying by shopping mall, and combining it with point rewards

Even for the same product, where and how you buy changes what you actually pay. Earphones and headphones are sold by multiple sellers under the same model number, so the more carefully you look here, the more of a difference it makes.

  1. First check the seller and the warrantyCheck who sells and ships the item, and whether it is covered by the manufacturer warranty. Even with the same model number, the warranty differs between an official route and a parallel import. For an extremely cheap listing, find out the reason first.
  2. Favor the mall with large point rewardsIf you buy during a big sale or a point-boost period, the effective cost goes down even when the listed price is the same. Reward rates and caps change, so check the current conditions on each official page.
  3. Compare the price gap between the previous generation and the latest modelIf there is no big difference in noise canceling or fit, the previous generation often gives better satisfaction and value.
  4. Also check how easy ear tips and replacement parts are to getIf you plan to use them for a long time, it matters whether you can buy ear tips that fit and whether the ear pads can be replaced. Established series have the advantage here.

If you use an iPhone, AAC; if you use Android and want to get the most out of the sound, LDAC. Narrowing your candidates with compatibility with the phone you have in mind cuts the time you spend torn between similar products on a mall. Point rewards vary a lot by period, so checking each official page just before you buy to see which mall is the best deal right now is, in the end, the most reliable approach.

One side not playing or not charging: warranty and replacement in practice

Earphones fail differently from other appliances. True wireless models are prone to a problem on just one side, left or right, and at first it is hard to tell whether it is broken or the pairing has simply dropped. Deciding what to do after delivery reduces rework.

Checks to make in the first week after opening

  1. Do both sides charge?When you put them back in the case, check the indicator for the left and right sides separately. If charging does not start on only one side, it is either dirty contacts or an initial defect.
  2. Play sound from one earbud at a timePlay audio for a few minutes with only the left or only the right, and see whether the single-earbud mode works normally and whether any dropouts occur.
  3. Switching between ANC and ambient soundCheck that the effect is even on both sides. If one ear has a much louder hissing white noise, it may go beyond normal unit-to-unit variation.
  4. Check the call microphone by recordingRecord your own voice with a voice memo or call app and listen for muffling or dropouts. Microphone defects are often noticed only after you have started using them.
  5. Update to the latest firmware with the dedicated appConnection instability in early production lots is sometimes fixed by an update. Judging by the symptoms before the update is not reliable.

Check first how the manufacturer warranty treats a single side

For true wireless warranties, some makers will replace just one side, while others take the left, right and case in as a set. Even where one-side replacement is available, the replacement may be a refurbished unit rather than a new one, and a one-side manufacturing lot difference can leave the firmware versions out of sync. Before buying, look at the brand's repair page and see whether both purchasing a single side after a loss and one-side replacement under warranty are offered, which makes later decisions quicker.

Loss and damage caused by the user are not covered by the warranty, so whether a single side can be bought for a fee matters quietly in the long run. Popular series tend to have this service better set up.

Assume the battery is a consumable

A built-in battery loses capacity the more it is charged and discharged. Many makers state clearly that battery wear over time is not covered by the warranty, so a free repair will not bring it back. Some models offer a paid battery replacement, but many true wireless units have a glued housing, so it can be treated as a replacement of the whole unit rather than just the battery. It is safest to check the support page at the time of purchase for a battery replacement service. Headphones, especially over-ear models with detachable ear pads, are often designed so the pads, cable and battery can be replaced separately, which makes a difference if you plan to keep them for a long time.

Whether returns and exchanges are possible depends on the mall and seller combination

On large malls, return conditions change depending on whether the seller is the mall itself or a separate merchant. Earphones are sometimes treated like hygiene products, and quite a few stores specify that after opening, only initial defects are handled. Assume that a return because you wanted to test the fit will not be accepted. It is more realistic to choose a model with a wide range of ear tip sizes, or to try them on at a store with display units before buying.

💡

Parallel imports and overseas versions may not receive warranty service through the domestic manufacturer's support desk. Popular series in particular are often listed with overseas and domestic versions mixed together, so be sure to check the manufacturer warranty and genuine domestic product notes on the product page, as well as the seller name. Some brands let you look up the warranty status on the manufacturer's website using the serial number.

What can stand in for a warranty card and receipt

In recent years, more makers are not including a paper warranty card and instead using the mall's order history as proof of purchase. Saving a screen that shows the order number, purchase date and seller is often enough, but if you received the item as a gift, you need the purchaser to share a copy. Repair requests are counted from the purchase date, so remember the order date, not the date you opened the box.

Fewer regrets after buying: common stumbling blocks when choosing earphones

Everything looks fine on the spec sheet, but it turns out not to suit you once you start using it. This happens easily with earphones. Here are the types of problems people commonly ask about.

Chose for strong ANC, but it does not work on the commute

Noise canceling has a characteristic: it is strong against continuous low-frequency sounds and weak against human voices. It removes the rumble of a train and the blow of an air conditioner well, but announcements on the train, a conversation in the next seat and clinking dishes in a cafe remain. In many situations where you feel it does not get quiet, the real culprit is voices and impact sounds. To deal with chatter in an office, a canal shape with high sound isolation and ear tips that fit work better than a stronger ANC.

Just wrong ear tips can lower both the bass and the ANC

Many people keep using the size M that comes in the box, but if the seal is poor, bass leaks out and the ANC visibly weakens. It is not unusual for the two ear canals to differ in size, so using different sizes on the left and right is a normal solution. Many makers' apps include a fit test that decides in a few seconds of playback whether you have a good seal. Run through it first thing after you buy. If no suitable size is included, you can look for third-party ear tips that match the stem diameter (nozzle thickness), but some models will no longer fit in the case, so watch the thickness.

Assuming bone conduction is safe because it does not cover your ears

Bone conduction and cartilage conduction types let you hear outside sounds, but if you raise the volume, the surrounding sound is drowned out. Models with strong vibration can also tire the temples over long periods, and some shapes interfere with the temples of glasses. Their bass does not match closed designs, so if you buy one intending to make it your main way of enjoying music, the gap is easy to feel. Satisfaction is more stable when you limit them to running and cycling.

Sound got worse when I joined a meeting with multipoint

Keeping both a PC and a phone connected is convenient, but when the PC side switches to the call profile (hands-free), the sound quality drops to a bandwidth meant for calls. That is why the music quality changes the moment you launch a meeting app. If you want one pair to handle both music and meetings, you can work around it by going into the PC sound settings and choosing the stereo output device rather than the headset, or by using the PC's built-in microphone instead of the earphones' microphone during meetings.

Not noticing the generation changed, and paying the new-model price for an old model

With popular series, it is common for the model number to differ by a single character at the end. If you order by product name alone, you may end up buying the previous generation thinking it is the new one. Check for an exact match on the model number, the release year on the product page, and the edition shown in the package photo. On the other hand, if you can decide that the previous generation is good enough, it is reasonable to wait for the period when the price tier drops.

Assuming Hi-Res support means the same thing wirelessly

The Hi-Res logo mainly refers to the reproduction range over a wired connection. For wireless, there is a separate mark called Hi-Res Audio Wireless, which requires support for LDAC or similar. The same product is treated differently when wired and wireless, so tell the types of logo apart.

Continuing to use a model that assumes an app, without the app

Recent models assume that settings are made in the dedicated app, from the equalizer and ANC strength to touch control assignments and wear detection on or off. It is a shame to decide the controls are hard to use or the sound is muffled without installing the app. Touch controls in particular can have default assignments that are easy to trigger by mistake, and complaints such as playback stopping just from brushing your hair back can often be solved by changing the assignment.

💡

If you wear glasses or a mask, ear-hook types and over-ear headphones are more likely to interfere. If you plan to wear them for long periods, thinking about clamping force and ear pad material together (leatherette seals well but gets stuffy in summer) will reduce mistakes.

What to know for your ears and safety

Apart from how to choose, there are points worth keeping in mind precisely because these are tools you use every day. This section is not about performance but about health and safety.

  • Managing volume and time: Listening at too high a volume for long periods may harm your hearing. In noisy surroundings people tend to turn the volume up, so using noise canceling to make it possible to listen at a lower volume ends up being kinder to your ears. Taking frequent breaks is also important.
  • Checking your surroundings outdoors: Earphones and headphones make it harder to hear what is around you. Be very careful when using them while walking, cycling or driving, and note that using them while driving may be regulated by law. Using the ambient sound feature outdoors or wearing only one earbud is effective. Bone conduction and open-ear types have a structural advantage in this respect.
  • Batteries are consumables: A rechargeable battery lasts for shorter periods the more you use it. If you notice abnormalities such as heat or swelling, stop using it, and avoid forcing its use or using incompatible chargers.
  • Keep them clean: Ear tips and ear pads get dirty from sweat and skin oils. Wiping or replacing them often keeps both the fit and hygiene in good shape.
📌

If you are concerned about how you hear or about problems with your ears, do not decide on your own; consult a specialist. The health and safety points here are general cautions, and the right response depends on symptoms and individual constitution. Product specifications and compatibility are also updated, so please check the latest official information when buying or using a product.

Frequently asked questions

If I use an iPhone, which codec should I look at?

iPhones work well with AAC, so first check whether the earphones support AAC and you will not go wrong. Even products that advertise LDAC support cannot give you that benefit, because the iPhone itself does not support LDAC. Rather than being pulled toward the advanced codecs on the spec sheet, it is more realistic to choose based on what actually works with your own phone.

Is noise canceling pointless unless I buy a high-end model?

There is a difference in how deeply it works. The low droning of trains and airplanes is cut more clearly by flagship models. If you ride trains every day or travel a lot for work, a higher tier is more likely to be worth it, while if you mostly stay in quiet rooms, the ANC of an entry to mid-range model is often enough. Deciding how much you need based on your own situations helps you avoid overspending.

Should I buy the previous-generation model or the latest one?

If there is no big difference in noise canceling or fit, the previous model often gives both better satisfaction and better value. Just after a new generation comes out is a time when the previous model tends to become a bargain. On the other hand, if you want the latest features (a new codec, spatial audio and so on), we recommend aiming for the newest model during a big sale combined with point rewards.

Is the sound quality of bone conduction and open-ear types lacking?

Because they do not cover your ears, they cannot match canal types or headphones for bass or isolation. However, if you use them for running or while doing housework and do not want to miss sounds around you, the safety and comfort are big advantages. Recent open-ear models have improved in sound quality too, so if you accept the trade-off for a specific purpose, they are quite practical.

How waterproof do I need for exercise?

For sweat and light rain, IPX4 or so is a guide, and if you also have intense exercise or heavy rain in mind, IPX5 or higher is more reassuring. However, IP ratings are tested with fresh water, and the salt and other components in sweat put a different kind of strain on the product. Do not trust the number too much, and get into the habit of wiping them lightly after use. Keep in mind too that charging cases are often not waterproof.

My earphones do not fit my ears and fall out easily.

First try changing the size of the ear tips that came with them. Many canal types come with several sizes. If they still do not fit, you can try third-party ear tips with a different shape. If they come loose when you exercise, models with wings or hooks that catch on the ear, or band types that go around the ear (bone conduction and open-ear), are more stable. The fit depends on the shape of your ears, so it is worth searching for one that suits you.

Is it safe to buy cheap parallel-import products?

They may be affordable, but you may not get manufacturer warranty or repair service. Even with the same model number, the warranty differs between an official route and a parallel import, so before buying, check who sells and ships the item and whether it is covered by the warranty. If you plan to use them for a long time, a genuine product with a warranty is ultimately more reassuring. For an extremely cheap listing, find out the reason before deciding.

Do I need LE Audio or Auracast right now?

It is not essential right now. LE Audio (LC3) is a new standard that transmits sound with low power, and Auracast is a mechanism for receiving audio broadcast to everyone at airports and facilities; compatible devices and venues are in the process of increasing. If you plan to use your pair for a long time, choosing a compatible model widens your options later, but if your current needs are met, there is no need to choose just because of support.

If I lose one earbud of a true wireless set, can I buy just that side again?

Many major makers offer a paid service for buying a single side, but it tends to be limited to popular series. The usual way is to apply through the loss service on the support page, specifying the model name and left or right. If it cannot be arranged, you would have to buy the whole set again, so it is reassuring to check before buying whether a single side can be ordered.

Is there any point in using LDAC-compatible earphones with an iPhone?

The iPhone supports only SBC and AAC, so LDAC is not used. However, LDAC-compatible models are often higher-end models, so the quality of the drivers and noise canceling themselves still counts. If you might switch to Android in the future it will not be wasted, but you can take it that there is no need to choose a higher-end model just for the codec.

Is it bad for my ears to keep noise canceling on all the time?

ANC itself is not regarded as harming hearing, but some people feel pressure or a blocked sensation in the ear. In that case, lower the strength or switch to ambient sound. What deserves more attention is that, because it gets quieter, the playback volume does not come down, and long continuous use becomes easy.

How should I care for earphones after sweating?

Even if the earbuds have a water-resistance rating, the charging case is often not covered, so the basics are to wipe the water off the earbuds with a dry cloth and put them back in the case only after the area around the charging contacts is dry. Many ear tips are made of a material that can be removed and rinsed, and they should be completely dry before you put them on. Earwax clogging the mesh of the nozzle makes the sound muffled, so we recommend checking regularly.

Are wired earphones no longer worth choosing?

They have almost no delay and do not stop working because of battery wear, so they are still useful for games, monitoring when playing an instrument, and long hours of work. Many recent phones have no headphone jack, so you need a USB-C type or an adapter. The fact that they often have the advantage in sound quality at the same price is also a factor to weigh.

Is it okay to share one pair with family?

It is possible as a device, but ear tips touch the skin, so it is more hygienic to prepare separate ones. Also, although pairing information can be remembered for multiple devices, there is a limit to how many can be connected at once. You will have to switch the connection every time the person changes, and note that settings in the dedicated app (equalizer and touch controls) will also be overwritten.

* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.