How to Choose a Gaming PC and Monitor: Judging Performance and Timing Your Purchase

Price Cycles by Category Published: 2026-10-18 25 min read

Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.

80% of the budget is decided by the GPU: first, pick the one resolution you will play at

A gaming PC has so many part combinations that it is easy to get lost on where to spend. But what affects gameplay comfort most is the GPU (graphics card), and once you decide your playing resolution (Full HD, WQHD or 4K), the GPU class you need narrows down quickly. If you skip this and just buy something high-end “to be safe,” the budget usually balloons and you cannot make full use of it.

The higher the resolution, the heavier the load on the GPU. At Full HD many titles run comfortably even on a mid-range GPU, but each step up to WQHD and 4K calls for a GPU one class higher. As a basic allocation, make sure the CPU and memory meet the minimum for smooth play and put the rest into the GPU. Especially in fast-paced competitive games, a setup that keeps the frame rate (frames per second) high feels better than chasing resolution.

Playing resolutionBest forTypical GPU load
Full HD (1920×1080)Competitive/FPS players who want high frame ratesHigh fps is within reach even with a mid-range GPU. The value-for-money zone
WQHD (2560×1440)Those who want both sharpness and smoothnessA mid- to high-end GPU is the guideline. The mainstream zone these days
4K (3840×2160)Visual quality first, playing on a big screenA high-end GPU is a prerequisite. The load jumps sharply
💡

GPU classes are split by model number: “RTX ○○○○” for NVIDIA and “Radeon RX ○○○○” for AMD. Within the same generation, a bigger number means higher performance and a higher price. Starting from the class closest to the official “recommended specs” of the game you want to play helps you buy neither too much nor too little.

When a new generation arrives, the previous one gets cheaper: reading the buying peaks

GPUs and CPUs move to a new generation every few years. With both NVIDIA’s RTX series and AMD’s Radeon, once a new generation appears, PCs with the previous generation, which was the main line until just before, tend to be discounted. There are periods when older configurations become a bargain as stock is cleared. Unless you want to play the newest games at maximum settings, this “one generation back” is where the best value is found.

The key point is that a mid- or high-class GPU from the previous generation can sometimes be faster than an entry-level GPU of a newer generation. For example, between the latest generation’s entry GPU and the previous generation’s mid-range GPU, the latter can be better for gaming. The trick to avoiding mistakes is to look at what class of performance the GPU actually delivers, not whether it is the newest.

Good timingWhy prices tend to fall
Around the announcement or release of a new GPU/CPU generationStock of older configurations is cleared, so previous-generation models tend to get cheaper
Fiscal year-end of manufacturers and retailersTo boost sales, discounts and extra points on prebuilt and BTO PCs tend to appear
Year-end/New Year and big salesPrebuilt PCs and monitors tend to get discounts and rewards at the same time, in line with peak demand

If you keep thinking “if I wait for the next generation, I’ll get something better for less,” you will never buy. Because the previous generation gets cheaper every time a new one arrives, it is realistic to commit when the performance that is enough for the games you want to play has become affordable. Specific prices vary greatly by time and store, so check the current listings on each e-commerce site or store.

“New model announcements,” “fiscal year-end,” “the new-life season”: three waves that move gaming PC prices

Among home electronics, gaming PCs and monitors are a category where the reasons for price movement are fairly clear. And when the reasons are clear, you can judge for yourself whether to wait or buy. Here we sort out the three “waves” specific to this field.

Wave 1: from a new GPU/CPU generation announcement until the stock turns over

The biggest wave is, after all, a new GPU generation. Since the GPU makes up a large share of a gaming PC’s price, a generation change shakes up how the whole unit is priced. What to remember here is that “the day of announcement” and “the day real selling prices move” are different things.

The typical flow goes like this. First a new generation is announced, and models are released starting from the top end. At this stage, previous-generation stock often keeps firm prices. Retailers have no reason to suddenly break their pricing while holding inventory. Movement starts around when the new generation’s mid-range products, the price band most people actually buy, are all out. Now a concrete comparison of performance and price against the previous mid-range becomes possible, and the previous-generation side adjusts its price to compete. This is also about when previous-generation GPU options quietly begin to disappear from BTO makers’ configuration tables.

So if you are going to wait, use “when the new generation’s mid-range is on sale at real selling prices” as the guide, not “the new generation announcement,” and the wait is more likely to pay off. Reacting only to the announcement of top models and then waiting several months for nothing is a common story.

💡

If you are aiming at a previous-generation GPU, by the time prices move, the configurations still in stock are often limited. “Cheaper later, with the configuration I like” rarely works out; typically only specific models remain, with the power supply capacity, case and SSD size already fixed. Once you have your target, decide on where you will compromise in the configuration at the same time, and it becomes easier to act.

Wave 2: monitors move by “model number suffix”

Monitors do not have generation changes as dramatic as GPUs. Panel generations advance slowly over several years, and in the meantime makers keep releasing the same series with changed suffixes. What happens here is the clearing of the previous model when its successor appears.

A successor to a gaming monitor does not always mean a big change in the panel itself. Often the difference is only a step up in refresh rate, a new video input standard or additional stand adjustments. In that case the previous model is “still perfectly usable but being cleared from store shelves.” This is the most convincing time to buy a monitor.

Conversely, if what changed in the successor is the video input standard, be careful. In a setup that aims for both high resolution and high refresh rate, the cable standard can set the real upper limit. Before deciding “the previous model is enough,” check whether the combination of your GPU’s output and the input the monitor accepts can deliver the resolution and refresh rate you are after. This is the one part where letting an attractive price override your judgment tends to leave regret.

Wave 3: seasons. Three peaks: school term, fiscal year-end and year-end

The three that are easy to see in Japanese stores are the following.

PeriodWhat tends to happen in this fieldSuitable or not
New Year to springPromotions for PCs in general grow for the new-life season. Laptops and office-oriented configurations tend to take center stageFor gaming, peripherals and monitors benefit more easily
Period when fiscal year-ends clusterRetailers tend to adjust inventory, so display-model clearances and older-model clearances appearA good match if you are aiming at previous-generation GPU machines or previous-model monitors
Year-end big sale seasonOverlaps with sales on consoles and game titles, and demand itself risesMore choices, but popular configurations go fast. Better to go in with your target decided

There is a caveat specific to this field. During big sale seasons, game titles also get cheaper, so “buying the PC and getting the games you want at the same time” tends to work out, which is an advantage. But as demand rises, stock of popular configurations disappears first, which is a drawback. In particular, mid- to high-end configurations with spare power supply capacity and monitors of standard size and refresh rate see their options shrink soon after the sale begins.

Another cycle: “release of new titles”

A wave unique to gaming PCs is around the release of major titles. When the recommended specs of a much-discussed game are published, attention gathers on configurations that meet them, and models with the relevant GPUs tend to move. Conversely, when no major title is about to launch, you can choose relatively calmly.

Still, do not be dragged around too much by recommended specs. The published recommended specs often do not state the conditions of which resolution, which quality settings and how many frames, or if they do, the conditions are modest. It reduces waste in the end to first decide the resolution and frame rate you actually want to play at, and work backward from there.

Three questions to decide between waiting and buying

  1. Do you have a game you want to play right now?If you have already settled on titles and your current setup is not up to it, the waiting time itself is a loss. Even if waiting half a year lets you buy one step cheaper, if you could not play during that half year, the balance is doubtful. Conversely, if it is just “I’d like to start someday,” you can afford to wait for a wave.
  2. Is your target configuration at the edge or the middle of a generation?If you are aiming at the previous generation’s top model just as the new generation’s top models have appeared, waiting a little longer makes movement more likely. If you are already in the later part of a generation and talk of the next one is starting to appear, waiting further may simply mean the stock thins out.
  3. Do you need to buy the PC and the monitor at the same time?You can think of these separately. A monitor does not go stale quickly and can also connect to your current PC or game console. It is realistic to wait for a wave only on the PC side and secure the monitor early when conditions are good.
💡

If you are aiming at a BTO, check the delivery time as well during sale seasons. Made-to-order BTO PCs can see assembly and shipping delayed when orders concentrate, so delivery can take longer than usual. “I got the sale price, but it arrives after the long holiday” can defeat the purpose. Checking the estimated shipping date for that configuration before adding it to the cart gives peace of mind.

Conversely, when you should not wait

We have been talking about reading the waves, but there are also clear cases where waiting is a disadvantage.

  • Your current setup is about to fail: waiting with an unstable PC also means prolonging the time your data is at risk.
  • The configuration you want is “previous generation and a best seller”: by the time prices move, that configuration itself is likely to be gone. Rather than waiting for a price drop, deciding while stock remains is more reliable.
  • Your monitor standard requirements are clear: if it is fixed as “this resolution at this refresh rate,” the models that meet the conditions are limited to begin with. In a field with few options, prices are unlikely to fall sharply even if you wait.

Reading the best time to buy is not only about buying cheaply. Decide first “from when I want to play,” and work backward from there. Put the order that way and the answer to wait-or-buy comes out quite easily.

Match the monitor to the PC: thinking about resolution and refresh rate

Once you have decided on the PC, the monitor is next. A gaming monitor’s character changes with resolution, refresh rate, panel type and size, but the most important thing is whether it is balanced with the PC’s performance. Buying a high-end monitor is wasted if the PC cannot produce that many frames, and conversely, connecting a low-spec monitor to a high-performance PC keeps you from drawing out the PC’s power.

Refresh rate shows how many times per second the screen is redrawn, expressed in Hz (hertz). Ordinary monitors are around 60Hz, while gaming ones go up to 144Hz, 240Hz and beyond; the bigger the number, the smoother the motion. The difference is easy to feel especially in fast-paced competitive games. But to take advantage of a high refresh rate, the PC also needs the performance to output that frame rate. Decide with your PC’s performance in mind whether to aim for “high refresh rate at Full HD” or “sharpness at WQHD/4K”.

💡

Pairing a monitor that supports variable refresh rate (VRR), such as NVIDIA’s “G-SYNC” and AMD’s “FreeSync,” with a compatible GPU reduces stutter and tearing (splitting of the image). Matching the supported standard to your PC’s GPU lets you draw out smoothness more consistently.

Panel types and sizes: “speedy IPS/TN” or “deep-black VA/OLED”?

Monitor panels come in different types, each with its own strengths. Choosing the panel that suits how you play, not just the numbers on the spec sheet, raises satisfaction.

PanelStrengthsSuited for
IPSGood color and viewing angles, and more models now respond quicklyThose who want a good balance of visuals and competitive play
TNFast response time and a good match for high refresh ratesThose who put reaction speed first, such as in FPS games
VAHigh black depth (contrast)Those who also enjoy games and movies with many dark scenes
OLED (organic EL)Deep blacks, vivid color and fast responseVisual quality first. Pricier, and burn-in needs consideration

Size is decided by the depth of your desk and the distance to the screen. If it is too big for a short distance, eye movement increases, it is hard to take in the whole screen, and you get tired instead. As a guide, 24 to 27 inches for Full HD, around 27 inches for WQHD, and one size bigger for 4K or curved ultrawide. The combination of resolution and size changes the “dot fineness (sharpness),” so on larger screens a higher resolution makes roughness less noticeable. If you can see the actual unit in a store, checking the color, brightness and how the dots look before choosing gives peace of mind.

BTO or prebuilt, which to buy? Sorting out the criteria

You can buy a gaming PC in two broad ways: BTO (build to order, where you choose the configuration when ordering) and prebuilt (the maker’s ready-made models). Neither is the right answer; suitability depends on what you value.

How to buyStrengthsPoints to watch
BTOYou can choose the CPU, GPU, memory and storage. Easy to tailor to your purpose, and domestic support is often availableDelivery may take time. Some knowledge of choosing configurations is needed
Prebuilt (ready-made models)Arrives ready to use. Often eligible for sales and point rewardsLess freedom in configuration. Check the contents of each model number

As a rough rule, choose BTO if you want to decide the configuration yourself and value domestic support, and prebuilt if you want to take advantage of sales and point rewards or just want to use it quickly. When choosing an overseas brand’s product, it is safer to check beforehand the support contact, supported languages, and the length and scope of the warranty. When comparing, looking not only at the unit price but at the “real burden” including point rewards and extended warranty can change how things look.

📌

Discounts and point rewards on prebuilt PCs vary greatly by time. Reward rates, annual fees and campaign conditions change, so check the current conditions on the official page of each e-commerce site or card. If you buy the unit and the monitor across multiple retailers, comparing each one’s rewards and bundle benefits makes it easier to keep the total burden down.

Setup, power and cooling to check before delivery

When absorbed in performance, it is easy to overlook placement, power and cooling. If you do not settle these, your PC may not run well or its life may be shortened. Keep them in mind as pre-purchase checks.

  1. Measure the installation spaceGaming PCs are often large. For a tower, check the depth and height, and the wiring space needed at the back. Deciding the desk layout with the monitor beside it in advance keeps you from panicking after delivery.
  2. Check the power capacity and wiringHigh-performance GPUs consume a lot of power. Watch the outlet positions and overload from octopus wiring (plugging many devices into one outlet), and consider adding or spreading outlets if needed. Whether the power supply unit (PSU) has spare capacity is also a guide when choosing a configuration.
  3. Secure heat dissipation and airflowPushing the unit tight against a wall or into a closed shelf traps heat and lowers performance. Create airflow paths at the front, back and top. Heat grows the more performance you draw out, so pay attention to room temperature in summer too.
  4. Schedule regular cleaningDust inside lowers cooling performance. Clean regularly with compressed air or similar. When touching the inside, always turn off the power and unplug before working.

The more powerful the GPU, the greater the heat and power consumption. Thinking of it as a set, “more performance means room is needed for heat dissipation and power,” makes trouble after purchase less likely. Specifications and compatibility differ by product, so finally check each product’s spec sheet.

The first week after delivery is decisive: what to check on defects, warranty and support

Gaming PCs and monitors are categories where checking right after delivery matters especially. There are two reasons. One is that it is hard to tell whether a problem is an “initial defect,” a “compatibility issue” or a “setting”. The other is that some symptoms, like monitors’, have criteria defined by numbers, and contacting support without knowing the criteria leads to a conversation that does not connect. Let us go through them in order.

The PC itself: first, checking that it works

Whether BTO or prebuilt, before installing games right away, checking the following in order makes later talks quicker.

  1. Exterior and signs of transportFirst check for dents in the case, cracks in the glass panel and wobbly feet. Damage in transit may be handled separately from the warranty, and the deadline to report it from receipt may be set short. Taking photos when unboxing helps keep things from getting complicated.
  2. Boot up and confirm the configuration is as orderedIn the OS settings screen or Task Manager, check the CPU, memory capacity, GPU name and storage capacity. With BTO, configuration mix-ups occasionally happen. In particular, whether the memory is installed as two sticks (not consolidated into one) directly affects performance, so it is worth checking.
  3. Visually check for looseness insideCheck that the GPU card has not lifted in transit and that no cable touches a fan. If the side panel can be opened, a quiet look gives peace of mind. However, opening it may change your warranty, so read about any seal sticker and the terms first.
  4. Behavior under loadPlay the game you will actually use, or keep running a demanding task, and see whether it suddenly crashes or makes strange noises. A common initial defect is the type that is fine at idle and crashes only under load. If you only do light tasks, you will miss it.
  5. Plug into each port onceVideo outputs on the back, USB, wired LAN, front ports. Even if you do not plan to use them, doing a power-on check once within the initial defect period prevents “it was actually dead from the start” later.
💡

For crashes under load, the first thing to suspect is the power supply side. In particular, when it is plugged into the same power strip as other appliances or into an octopus wiring setup, the cause may be the power supply environment, not a PC fault. Before contacting support, checking whether it reproduces when plugged directly into a wall outlet moves the isolation a step forward.

Monitors: read first from how many dead pixels it counts as an exchange

A topic specific to monitors that cannot be avoided is dead pixels and stuck bright pixels. What you should know is that a few dead pixels are not treated as “defective” by many makers. Because of how LCD panels are made, it is common to have a standard that regards up to a certain number as within spec.

So the following are what you should check before purchase.

  • From how many pixels that maker or retailer treats the unit as eligible for exchange: the standard is often written on the product page or in the warranty terms.
  • Whether the center and periphery of the screen are treated differently: in some cases the area near the center has a stricter standard.
  • Whether a dead-pixel warranty option exists: some retailers offer a paid scheme similar to a “zero dead pixel guarantee.” It can often only be added at the time of purchase, so if you are concerned, consider it so you do not regret it later.

Once it arrives, display the whole screen in a solid color (black, white, red, green, blue) and check. Stuck bright pixels (glowing dots) are easy to find on a black background, and dark pixels (black dots) on a white background. Do this check within the initial defect period. If you notice after months of use, you cannot prove since when it has been there.

Other symptoms to check on a monitor

SymptomHow to checkAssessment
Light leakage (backlight unevenness)In a dark room, display full-screen black and look at the corners and edgesTo some degree it is normal for LCDs. If an extremely bright band appears, it may be worth consulting about
Color or brightness unevennessDisplay solid gray and look at differences by screen locationA range with wide unit-to-unit variation. Standards are often not stated explicitly
The set refresh rate is not availableCheck the values you can select in the OS display settingsOften caused by the cable standard, connector or GPU-side settings, and not necessarily a fault
Variable refresh rate does not turn onCheck both the GPU utility and the monitor’s OSDIt may need to be enabled on both sides. Support may also differ depending on the connector
No sound from the speakersCheck the output destination setting on the OS sideOften it is just that audio output via the video cable is not the default

The bottom three in the table are all cases that are often not faults. Before contacting support, go through the cable standard, connectors, and the settings on both the OS and monitor sides. If you contact them without checking, you will end up spending time being given the same guidance.

For warranty, look at “scope and contact point” rather than “years”

Comparing only the length of the warranty period is unlikely to help when you are in real trouble. In this field the following three points matter more.

  • Whether there is a single point of contact: for BTO and shop-brand PCs, it is common for the shop you bought from to handle everything. On the other hand, if you use each part’s manufacturer warranty separately, you do the isolation yourself. It is safer to check which format applies before purchase.
  • Pickup repair, drop-off or shipping: because desktop PCs are heavy and large, whether shipping is realistic matters a lot in practice. If you throw away the packaging, you will have trouble when sending it for repair. We recommend keeping the outer box and cushioning at least during the warranty period.
  • Handling of data: it is quite possible that the storage will be initialized or replaced during repair. It is generally the case that backing up data is the responsibility of the person sending it for repair. Even if game files can be re-downloaded, save data and screenshots will not come back.
💡

BTO shops sometimes offer, in addition to the standard warranty, options to extend the period or widen the coverage. Most of them can only be applied for at the time of purchase, so they cannot be added later. For a mid- to high-end configuration you plan to use for a long time, it is worth reading through the details on the order screen.

How to describe the problem so it is not brushed off as “compatibility”

A gaming PC problem does not always have a single cause. That is why, when you contact support, conveying the conditions for reproducing it as concretely as possible speeds things up.

  • When it happens (right after startup / several tens of minutes under load / only in a particular game, and so on)
  • What the screen looks like then (goes black / becomes distorted / shows an error / the whole power goes off)
  • What you have tried (a different cable, a different port, plugging directly into a wall outlet, reinstalling the graphics driver)
  • Video or photos of when the symptom appears

In particular, writing “what you have tried” first saves the trouble of going through the standard guidance. Reinstalling the driver and testing with another cable are things you will be asked first anyway.

Check the return and exchange deadline before opening

In this field, return conditions differ quite a lot by sales channel. The initial defect period for mail order is often set short, and “it arrived but I was too busy to open it” can be fatal. Within the week it arrives, at least finish the startup and screen checks.

Also, in reality, “the performance was less than I expected” is hard to use as a reason for return. The performance a gaming PC needs changes greatly with the title, resolution and quality settings. That is why, as mentioned in the first half of this article, deciding before you buy “at what resolution and roughly what frame rate I want to play” is the surest insurance. It is much easier not to miss at the selection stage than to manage after it arrives.

Where money tends to leak: how to cut waste

Even with the same budget, a little thought about allocation and timing changes satisfaction. Here are common “wasteful ways to buy” and how to avoid them.

  • Over-spec for the games you play → Use the official recommended specs as the standard and choose a GPU in the class that is “enough.” Putting the leftover budget into the monitor or peripherals can sometimes improve the feel more.
  • A modest GPU but only the monitor is high-end → Balance the frame rate the PC can output with the monitor’s refresh rate. If only one is high, you cannot make full use of it.
  • Waiting forever for “the next generation” → When a new generation comes out, the previous one gets cheaper. Commit when the performance that is enough for the games you want to play has become affordable.
  • Comparing only the unit price → Compare by the real burden including point rewards, extended warranty and bundle benefits.
  • Resolution and monitor size that do not match → A low resolution on a big screen makes roughness stand out. Think of size and resolution as a set.
  • Choosing without considering expandability → If there is room to add memory, storage or a GPU later, you can use it for a long time without replacing it. BTO or easily expandable models have the advantage.
📌

Safety and tips for long use: (1) Long continuous play strains your eyes and body. Take breaks at a sensible pace and pay attention to screen brightness and posture. (2) If children use it, set rules on play time, online interactions and manage in-app purchases. (3) Buy from authorized, trustworthy sellers and check the warranty and support. Be wary of extremely cheap or unnatural sales and suspicious sites, and confirm with the official source. Specifications, prices and campaigns change, so please check the latest information on each e-commerce site’s official page.

Frequently asked questions

Full HD, WQHD or 4K: which resolution should I build for?

It depends on the games you play and how much smoothness you want. If you are into competitive play and want high frame rates, Full HD is the value-for-money zone. If you want both sharpness and smoothness, WQHD is the mainstream zone these days. If visual quality comes first and you play on a big screen, go for 4K, but the load on the GPU jumps sharply, so a high-end GPU is a prerequisite. Deciding on one resolution first makes it easier to narrow down the GPU class you need.

Should I choose the latest GPU generation? Is the previous generation fine?

It depends on use. If you want to play the newest games at maximum settings, a new generation suits you, but when a new generation comes out the previous one tends to get cheaper, so if you are not in a hurry, a previous-generation mid- to high-class GPU that has become affordable is a good target. A previous-generation mid-range GPU can sometimes be faster than a newest-generation entry-level one. Judge by what class of performance the GPU actually has, not whether it is the newest.

Should the refresh rate be 144Hz or 240Hz?

Decide by the games you play and whether your PC can output that frame rate. Higher is advantageous if you want to feel the difference in fast FPS games and the like, but if the PC cannot output that many frames, you cannot make full use of it. Many people feel enough smoothness at around 144Hz. First choose a rate that matches your PC’s performance, and if supported, adding G-SYNC or FreeSync lets it display more smoothly.

How should I choose a monitor panel?

Choose by how you play. For a good balance of color and speed, IPS; for reaction speed above all, TN; if you also enjoy games and movies with many dark scenes, VA with its good black depth; and if visual quality comes first and you have room in the budget, OLED is a candidate. Keep in mind that OLED needs consideration for burn-in. If possible, check the color and how the dots look on an actual unit to avoid mistakes.

How do I balance PC and monitor performance?

It is important that the two are balanced. Even with a high-refresh-rate monitor, you cannot use its performance if the PC cannot output that frame rate. Conversely, connecting a low-spec monitor to a high-performance PC keeps you from drawing out the PC’s power. Based on the games you want to play, matching the frame rate the GPU can output with the monitor’s refresh rate and resolution as a set lets you build without waste.

Which suits me, BTO or prebuilt?

If you want to choose the configuration yourself and value domestic support, BTO suits you; if you want to take advantage of sales and point rewards or use it right away, prebuilt does. In either case, it is safer to check support for initial defects and failures, and the length and scope of the warranty. For overseas brands, check the support contact and supported languages beforehand, and compare by the real burden including point rewards and extended warranty.

What should I watch for in setup and power?

High-performance GPUs consume a lot of power and produce heat. Secure heat dissipation space and airflow, and do not press the unit tightly against walls or shelves. Also watch the outlet positions and overload from octopus wiring. Since the unit is often large, measure the installation space and decide the desk layout with the monitor beside it in advance, so you do not panic after delivery.

Any tips for long, comfortable use?

Because dust inside lowers cooling performance, clean regularly (after turning off the power and unplugging). Leaving some room for heat dissipation reduces the load on parts and helps them last. With BTO or expandable models, you can add memory, storage or a GPU later to extend performance. Sensible use and care are, in the end, the shortcut to keeping costs down.

If I only replace the graphics card in my current PC, can I use it as a gaming PC?

Sometimes, but you need to check. First the power supply unit’s capacity and the type of auxiliary power connector, then whether the case has room for the card’s physical length and thickness. Also, if the CPU performance stays low, upgrading the GPU will hit a ceiling. For compact machines or models with a built-in power supply that cannot be replaced, replacing the whole unit may end up with less waste.

* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.