Air Purifier 2026: The Complete Guide

Household Goods & Daily Essentials Published: 2026-10-18 25 min read

Prices, point rates and sale details in this article were checked by the mottoku editorial team against each service's official site and API (as of the last update). Always check the official sites for current prices, stock and campaign terms.

Taking the "Applicable Tatami Count" at Face Value Will Mislead You

When you shop for an air purifier, the first thing that catches your eye in the catalog is the figure "recommended for ◯ tatami mats (畳)." But if you take that number at face value, you will almost certainly end up with a purifier that doesn't clean the air as well as you expected. The reason is that the test conditions behind the figure are far removed from a real room.

Under the standard set by the Japan Electrical Manufacturers' Association (JEMA), the applicable tatami count is calculated in a sealed test chamber, based on how much cigarette smoke the unit can remove in 30 minutes. In other words, it is a figure for an ideal state with no door opening, no ventilation, and no airflow disturbed by furniture. In a real home, people come and go, windows open, air conditioners create currents, and dirt is supplied continuously. As a result, if you put a purifier in a room the same size as the labeled figure, it ends up running near full power all the time and still can't keep up.

That is why a practical rule of thumb is "choose a model whose applicable tatami count is 1.5 to 2 times the size of the room where you'll put it." For an 8-tatami living room, that means a model rated for 15 to 20 tatami; for a wide, open space with few partitions, like a living-dining room, consider an even higher class. A larger model can circulate the air comfortably even on a quiet "low to medium" setting, so it tends to be quieter, and its filters clog more slowly.

💡

Another number to check is the "maximum airflow (m³/min)." Even at the same applicable tatami count, a model with greater airflow starts up faster and circulates air through the whole room more easily. For uses like pollen or pets, where you want to clean the air quickly in one go, comparing maximum airflow as well as the tatami count will help you avoid mistakes.

Understanding the Filter Structure, Layer by Layer

Inside, an air purifier is roughly a stack of several filters. Once you know which layer handles what, the spec sheet becomes much easier to read.

Pre-filter (the first line of defense)

This is the first layer, at the air intake, and it catches visible dust, hair, and pet fur. If it clogs, air can't reach the filters behind it and efficiency drops, so a type you can vacuum or wash has an advantage for upkeep.

HEPA filter (the star of dust collection)

HEPA (High Efficiency Particulate Air) is defined as capturing 99.97% or more of particles 0.3 micrometers in size. Pollen (roughly 30 micrometers), house dust, and PM2.5, all "solid fine particles," are handled almost entirely by this layer. Conversely, because HEPA works by straining out particles, it has almost no effect on gaseous components such as odors. If you misunderstand this and expect that "it has HEPA, so cigarette smell should disappear," you will be disappointed.

Activated carbon (deodorizing) filter

The activated carbon filter adsorbs gaseous components such as VOCs (volatile organic compounds), ammonia, and sulfides, which are the true source of odors. How well a unit handles smoke, pets, cooking smells, and the musty smell of damp laundry depends on the capacity of this layer. Activated carbon can only adsorb so much; once it is full, performance drops, and in some cases it can even re-release the odors it absorbed. If deodorizing matters to you, the right choice is a model with a large amount of activated carbon, or one whose deodorizing filter can be replaced separately.

Manufacturer-specific extra features

On top of the filter layers above, each company adds its own technology based on ions or electrical discharge. The idea is to act on airborne substances and adhered dirt before and after they are "caught by the filter," and we will look at this in detail in the next section.

📌

Products labeled vaguely, such as "HEPA-equivalent" or "high-performance filter," do not necessarily meet the HEPA standard. Checking whether the capture rate and particle size (for example, 99.97% at 0.3μm) are stated clearly makes it easier to compare real filter performance.

Sharp, Daikin, and Levoit: Different Design Philosophies

Even among "air purifiers," each manufacturer clearly emphasizes a different direction. Here we look at three representative brands in terms of their proprietary technology and design tendencies.

Sharp: Plasmacluster Works on "Airborne Substances"

Sharp's signature technology is Plasmacluster (プラズマクラスター). The idea is to release positive and negative ions into the air so that they act on airborne mold, pollen, and adhered odor components. There are grades by ion concentration, such as 7000 / 25000 / 50000; the larger the number, the higher the concentration and the higher the model's position in the lineup. At the high end, Sharp offers "humidifying and dehumidifying" models that handle dehumidification as well as humidification in one unit, a feature other makers lack, and because they work in both the rainy season and winter, they suit households that want "to run it at full capacity all year round." Because they are so full-featured, the unit tends to be large and the price high, so whether you can make full use of the functions is the deciding point.

Daikin: Streamer Focuses on "Decomposition"

Daikin, an air-conditioning maker, has its own technology called Streamer (ストリーマ). It uses plasma discharge containing high-speed electrons and is characterized by an approach that decomposes captured harmful substances and odor components. Since the idea is not just to collect them in the filter but to break them down, it plays to its strengths in lasting deodorization and in keeping the humidifying filter clean. Backed by airflow design cultivated in air conditioners, many models promote a way of moving air that efficiently draws in dust from far away, which is just what you would expect from an air-conditioning company. The design is somewhat plain, but it is favored by people who prefer function above all.

Levoit: A Practical Brand That Competes on Physical Filter Performance

An American brand that has suddenly gained presence in Japan in recent years is Levoit. It basically has no proprietary plasma or ion technology, and its basic approach is to offer the classic two-layer (or three-layer) HEPA + activated carbon configuration at an affordable price. Because it trims extra features and keeps things simple, the unit price is easier to hold down, and many models have replacement filters that are easy to obtain. It has a strong lineup of compact, quiet models, and it is often chosen as a secondary unit for a bedroom or studio apartment. On the other hand, it plays on a different field from Japanese makers that advertise sterilization and virus suppression with their own technology, so it suits people who can accept that "being able to physically collect dust and remove odors is enough."

📌

The effects of ion and discharge technologies such as Plasmacluster, Streamer, and nanoe (ナノイー) are values measured under test conditions that each company has set on its own. The same effect will not necessarily appear in every home environment. If you are hoping for sterilization or virus suppression, please check the test conditions published officially by each manufacturer before making your decision.

Humidifying All-in-Ones Are Convenient, but the Upkeep Multiplies

What stands out in stores is the "humidifying air purifier." Having one unit do the job in dry winter is certainly appealing, but this is also a category where the points people tend to regret after buying are concentrated. Let's think about the mechanism and the effort separately.

A humidifying all-in-one carries a water tank, a humidifying filter, and a tray in addition to the air-cleaning filters. Because it handles water, if left alone it accumulates bacteria, mold, and limescale (water scale), and there is a risk of spreading these into the room as humidifying vapor. In other words, a machine that is supposed to clean the air can, if neglected, become a source of dirt instead. Some models, like Daikin's, have features that keep the humidifying filter clean with Streamer, but even so, changing the water, washing the tray, and drying it for storage in the off-season are unavoidable.

The rule of thumb is simple. If you can change the water every day and wash the tray and humidifying filter at least once a month, you can enjoy the benefits of an all-in-one. If you think "I want to do as little appliance maintenance as possible" or "I'm busy and only have time on weekends," then an air purifier without humidification plus a separate humidifier often turns out cleaner and easier in the end. Kept separate, air cleaning doesn't stop even if the humidifier breaks, and you can put away just the humidifier in the off-season.

💡

Humidifying capacity changes with temperature and humidity conditions. In many cases where people feel the "humidification is weak" in a large LDK (living-dining-kitchen), the cause is that the humidifying capacity (mL/h) is insufficient for the room. If humidification matters to you, be sure to check the humidification coverage (listed separately for prefab and wooden houses) as well as the air-cleaning tatami count.

Choosing by Use and Placing It Correctly

What you should prioritize in terms of layers and placement changes depending on "what dirt you most want to deal with." Here are four representative situations.

Pollen and house dust

Pollen particles are large, and most HEPA-equipped models can capture them. The keys are fast start-up and placement. Right after you get home, pollen is shaken loose from your clothes, so running the unit on "strong" along the path from the entrance to the living room to knock it down all at once is effective. Rather than by a window or at the entrance, the basic approach is to place the unit near the center of the room, or diagonally opposite the entrance, to create airflow through the whole room. If your hay fever is severe, it is worth choosing a class with twice the applicable tatami count.

Pets (fur and odors)

Households with pets need to tackle "fur" and "odor" at the same time. Fur is caught by the pre-filter and the dust-collection filter, but they clog quickly, and on the assumption that you'll be cleaning more often, a model with an easy-to-wash pre-filter is easier to live with. For odor control, a model with a large amount of activated carbon, or one whose deodorizing filter can be replaced separately, is a good fit. Fur floats at a height close to the floor, so placing the unit on the floor is fine, but set it up so that pets can't knock it over or play with the intake.

Cigarettes and cooking smells

The main culprit in tobacco smell is gaseous components, so HEPA can't remove it. The adsorption capacity of the activated carbon filter is everything. Even a model with a large capacity has its limit, and performance falls off quickly, so check the replacement cycle and cost in advance. And the basic premise is that it is hard to remove harmful substances with an air purifier alone, so it must be used together with ventilation. In a room where people smoke indoors, choose a model with at least twice the applicable tatami count.

Bedrooms and kids' rooms

In this situation, quietness affects satisfaction more than performance. You can't sleep with it running on strong, so check the operating noise (dB) at the lowest setting. Many Japanese models have a "good night / night mode" linked to a brightness sensor, which automatically switches to low speed and dims the lamp when it gets dark. Compact, quiet-focused models like Levoit's also fit this use well. If the unit supports a smartphone app, you can check how it is running in the kids' room from another room.

💡

The iron rule of placement is "don't put it right up against walls or furniture." Blocking the intake and exhaust vents reduces airflow, and you can't make use of the applicable tatami count you paid for. Keep it at least 30cm away from the wall, and placing it so that it catches the air conditioner's airflow helps clean air reach the whole room.

The Real Reason It "Doesn't Seem to Work Even Though I Bought It" Is Usually Placement and Operating Mode

Among home appliances, air purifiers are one of the types whose effect is hard to feel. With a refrigerator you can tell whether it's cold or not, but an air purifier deals with invisible particles, so it is hard to notice when things aren't going well. Here we go over the mistakes, other than model choice, that tend to happen no matter whether you chose Sharp, Daikin, or Levoit.

The Moment You Push It Against a Wall, the Applicable Tatami Count Shrinks

The most common problem is placement. Many models draw air in from the back or sides and blow it out from the top or front. If you put a rear-intake type flush against a wall, the air it draws in collides with the air it blows out, causing a "short circuit" in which air circles only around the machine instead of moving through the whole room. The catalog's applicable tatami count is a figure obtained on the assumption that there is a path for air around the unit, so that assumption breaks down when it is pushed up against a wall. When the manual says "keep the back ○cm away from the wall," it is not just decoration.

In addition, you should avoid placing it behind furniture or behind curtains. Curtains not only block the intake but are also a source of dust. If you push it behind the sofa, only that narrow space gets clean, and the air at the height where people sit stays still.

Choosing "Exactly the Applicable Tatami Count" for a Room Where the Door Isn't Closed

In Japanese floor plans where the living room, dining room, and a Japanese-style room are connected, the space that is actually being air-conditioned is larger than the labeled tatami count. If you put a model that matches the applicable tatami count exactly in the living room, it will end up processing air flowing in from the next room endlessly, and either it keeps running loudly or stays quiet but never keeps up. For connected rooms, think in terms of the total area, or decide to prioritize a bedroom or kids' room where you can close the door, and the difference you feel will improve.

Leaving It on Auto While Placed Where the Sensor Doesn't Respond

The dust sensor and odor sensor are in only one spot on the unit. If the sensor face points toward a wall, or it is so close to the floor that it constantly picks up stirred-up dust, the auto-mode judgment goes off. If it is in the corner farthest from the kitchen where you're grilling meat, by the time the smell reaches it, it has already spread throughout the room. Auto mode is not all-powerful; when you know things are going to get dirty, such as when cooking, vacuuming, or before guests arrive, it works faster to switch to strong manually.

💡

If you start it on strong "before" vacuuming, it is easier to catch the particles that get stirred up. Just starting about 30 minutes earlier, rather than switching it on after you finish cleaning, changes how it feels.

Skipping Pre-filter Cleaning Shortens the Life of the HEPA Filter

Even a dust-collection filter advertised as "no replacement needed for 10 years" is a different story if the pre-filter in front of it is clogged. The pre-filter catches large dust and hair, and when it clogs, airflow drops and the amount of air that can be processed on the same operating mode decreases. In addition, larger dust that slips through clogs the HEPA surface first, and a filter that should have lasted 10 years becomes hard to pass air through in just a few years. Once a month, simply vacuuming it with a brush nozzle is enough. In a room with lots of pets or lint, you could shorten that to every two weeks.

Not Changing the Water in the Humidifying Tray Turns You into the One Spreading Odors

This is a typical failure with humidifying all-in-ones. If you only top up the tank and never change the water in the tray, slime builds up on the bottom of the tray and on the humidifying filter, and the unit ends up sending out odors along with the moisture. If you use it with heating in winter in particular, the water temperature rises and the process speeds up. Putting it away with water still in it during a season you don't use it is the same, and by the time you take it out the next season, it's too late. It is safest to decide in advance that, in the season when you stop humidifying, you empty the tank and tray and dry them completely before storing.

Forgetting to Remove the Plastic from the Filter, or Inserting It the Wrong Way Round

It sounds like a joke, but it really happens. A new dust-collection or deodorizing filter may be set in the unit still in its packaging, and if you run it without removing the bag, of course almost nothing happens. If you feel "it's new but the airflow is weak" or "the smell won't go away," first open the front panel and check. Many models also specify which side or which end of the filter faces which way, and if you insert it backwards, it won't seal properly and air passes straight through the gaps.

💡

Even within the same brand, the model numbers of replacement filters are divided finely by model. If you don't note the model number of the unit and buy under a broad category like "for Sharp air purifiers," it may not fit in because of the size. Taking a photo of the label on the back of the unit before buying is the surest way.

Reading the Numbers and Marks on the Spec Sheet in a Comparable Way

On an air purifier's product page, numbers based on industry-group standards and manufacturers' own names are lined up together. If you can separate which numbers are on the same footing and which can't be compared, you will have much less trouble choosing a model.

The Relationship Between Applicable Tatami Count and "30 Minutes"

The "applicable tatami count" in the catalog is based on the Japan Electrical Manufacturers' Association standard and is shown as the size of room in which a specified amount of cigarette smoke can be removed in a set time. The key point is that this figure assumes 30 minutes at maximum airflow. In other words, if it says "8 tatami," that is the upper limit of the room size it can handle in 30 minutes at maximum airflow, not the room size it can comfortably maintain on quiet operation. In actual use you mainly run it on quiet to medium airflow, which is why the idea of choosing an applicable tatami count 1.5 to 2 times the room size is so widely used.

Please also look at the "cleaning time" listing. It is often written as how many minutes it takes to clean 8 tatami, and this reflects the difference in ability between models more honestly. Even at the same "applicable 25 tatami," a model that cleans 8 tatami in 8 minutes and one that takes 12 minutes differ in the margin they have in the medium-airflow range you use day to day.

Looking at Airflow in m³/min, and the Value at Quiet Settings

Airflow is shown as "maximum ○ m³/min." What is easy to overlook is the airflow on quiet operation. Many models list the airflow and operating noise for quiet, medium, and strong side by side in the spec sheet, so choosing a model that keeps adequate airflow on its quiet setting helps you avoid the state in a bedroom where it is "quiet but doing nothing." Operating noise is given in dB, and a rough guide is that the low 20 dB range is about the sound of leaves touching, while above 40 dB it starts to bother you in a bedroom.

HEPA, Activated Carbon, and the Single Word "Equivalent"

"HEPA filter" is a standard-based name for a filter with the performance of capturing 99.97% or more of 0.3-micrometer particles. Whether a product page says just "HEPA" or says "HEPA-equivalent" or "high-performance filter" makes a surprisingly big difference. When "equivalent" is attached, it may claim to be on par, but it has not necessarily passed the standard's tests. With inexpensive overseas brands, checking for the presence or absence of this one word lets you choose with confidence.

On the deodorizing side, activated carbon is the main player. The labeling here tends to be rough, and often it says only "activated carbon filter." What you can use to judge is whether the deodorizing filter is integrated with or separate from the dust-collection filter, and the replacement cycle. A model with a separate filter and a stated replacement cycle makes it clearer what to do when it stops removing odors. If you'll use it around pets or near the kitchen, it is worth prioritizing the thickness of the deodorizing part and how easy it is to replace.

LabelHow to read it
Applicable tatami countUpper limit at maximum airflow over 30 minutes. In practice, look for 1.5 to 2 times the room size
Cleaning time for 8 tatamiThe shorter, the more margin. Good for comparing models
Airflow m³/minCheck the quiet-setting value, not just the maximum
HEPA / HEPA-equivalent"Equivalent" is wording that does not assume standard testing
Filter life 10 yearsA guideline under certain conditions. Assumes the pre-filter is cleaned
Humidification amount mL/hA value under low-temperature, low-humidity test conditions. It falls in actual use

Plasmacluster and Streamer Use Numbers That Mean Different Things

Sharp's "Plasmacluster 7000 / 25000 / NEXT" are numbers that indicate ion release concentration. 7000 means about 7,000 ions per cubic centimeter, and the larger the number, the higher the model in the lineup. However, this is a separate axis from dust-collection performance, and it is perfectly common to find combinations where the applicable tatami count is the same but the number differs.

Daikin's "Streamer" has no concentration-like grade marking; instead, higher-end models are indicated by the number of discharge units (1 or 2) and the combination with a TAFU filter. Even for technologies with similar-sounding names, the places you should look to compare them are completely different. Overseas brands such as Levoit mostly have no such ion-type extra features and are designed to compete on filters and airflow, so their spec sheets are simpler to that extent.

Humidification Amount, and the Suffix on Filter Model Numbers

The humidification amount of a humidifying all-in-one is shown in mL/h and is usually a value measured under low-temperature, low-humidity conditions (around 20°C / 30%). In a room where the temperature is high, or where there is already a certain amount of humidity, you won't get this figure. The catalog's "humidification coverage floor area" is also given in two ways, for a prefab Western-style room and a wooden Japanese-style room, so read it according to which is closer to your home. The wooden Japanese-style room figure should be the stricter one.

Finally, replacement parts. Filter model numbers generally take the form of a prefix such as "FZ-" or "KAF" followed by letters indicating the model, and a difference in the last single letter makes it a different part. If you note the genuine part number from the unit's manual, you won't be lost in a store or online.

💡

For models that have three separate filters for dust collection, deodorizing, and humidification, each has a different replacement cycle. Jotting down "which one is for how many years" at the time of purchase will help you avoid the situation, a few years later, of "not knowing what to buy."

Total Cost Calculation: Don't Swallow the "10-Year Filter" Whole

An air purifier is an appliance you use for a long time, so the rule is to compare by total cost rather than the unit price. Many top-end models from major Japanese makers advertise filters that "need no replacement for 10 years," and the low replacement frequency is certainly a big strength, but this "10 years" comes with conditions.

The 10 years is a guideline under standard conditions assuming "about 5 cigarettes a day", and naturally it will be shorter in environments with lots of pets, smoking, or cooking oil smoke. If the pre-filter is left uncleaned, the burden on the HEPA and activated carbon behind it increases and their life shrinks further. Conversely, frequent pre-filter cleaning is the biggest cost-saving measure for making the expensive main filter last.

On the other hand, with overseas brands like Levoit and budget models, even if the unit is affordable, the replacement filter often needs changing every 1 to 2 years. Even if a single replacement costs a few thousand yen, buying one every year brings the total close to the unit price within a few years. The table below organizes how to think about cost (amounts vary by model and time, so check the latest prices on each official site and e-commerce site before buying).

ItemTop domestic models (long-life filters)Overseas / budget models
Unit price tendencySomewhat highAffordable
Filter replacement guidelineLonger (several years to 10 years under standard use)Shorter (mainly every 1 to 2 years)
Proprietary technologyPlasmacluster / Streamer, etc.Basically none (filter-focused)
Support and parts supplyTends to be comprehensiveMay be limited
Best forYear-round full operation and people who value thorough supportThose who want to keep initial costs down, or want a secondary unit

Electricity costs also differ greatly between "quiet mode" and "strong operation." If it will run all the time, look at the power consumption at standard to quiet settings rather than the maximum, and use that to judge how much waste auto mode saves.

Real Examples of Trouble in Choosing a Model, and When to Buy

Finally, we summarize the points that tend to separate "bought it and regretted it" from "chose well," and how to think about the times when prices tend to move.

Examples where people often stumble

  • Chose exactly the applicable tatami count → In a real room there is no margin, so it runs at full power all the time, which means noise and not keeping up. Choosing again at 1.5 to 2 times makes it suddenly comfortable.
  • Looked only at HEPA and overlooked odor control → Tobacco and pet smells don't go away, and people regret it. Understand that deodorizing depends on the capacity of the activated carbon.
  • Chose an all-in-one for humidification but couldn't keep up the upkeep → A typical case of giving up on the humidifying function because managing the tank is a hassle. It happens when the effort is underestimated.
  • Didn't check whether replacement filters are available → With an older model or a parallel import, filters are hard to find and the whole unit ends up being replaced. Check the genuine supply route first.
  • Put it in the bedroom without trying how quiet it is → Even the lowest setting bothers you and you end up not using it. Check the dB value and what reviews say about how it feels beforehand.

When Prices and Stock Tend to Move

Air purifiers have a seasonal-product side. Around the January to March pollen season, demand rises, and for popular models both stock and prices tend to move. On the other hand, in early summer after the pollen settles, and in early autumn when new models come out, previous-year models are more likely to be among your options. If you don't insist on the latest proprietary technology, last year's model is a good target. However, with an older model, be sure to check that the replacement filter hasn't been discontinued.

On the payment side, skillfully stacking points from electronics retailers and point-boost periods at Rakuten, Yahoo! Shopping, and similar sites can lower your real cost. Reward rates, conditions for earning points, and annual fees change depending on the time and the campaign, so be sure to check the latest conditions on each official page. Even for the same model, comparing by "real cost," which adds up the unit price, point rewards, and filter costs, is the way to lose the least on an appliance you'll use for a long time.

Frequently Asked Questions

Is it okay if the applicable tatami count is exactly the same as my room?

If it is the same, there is no margin, and sometimes it can't keep up even running at full power all the time. The basis of the applicable tatami count is a measurement in a sealed test chamber, and real rooms have worse conditions because of doors opening and ventilation. If you choose an applicable tatami count 1.5 to 2 times the size of the room as a guide, it can clean comfortably even on quiet operation, and the filters clog more slowly.

If it has a HEPA filter, will tobacco and pet smells go away too?

They are unlikely to. HEPA is a filter that strains out "solid fine particles" such as pollen and PM2.5, and it has almost no effect on the gaseous components (VOCs) that are the source of odors. What handles deodorizing is the activated carbon filter, so to deal with tobacco and pet smells you need to choose a model with a large amount of activated carbon, or one whose deodorizing filter can be replaced separately.

Which is better, Plasmacluster or Streamer?

You can't say which is superior. Sharp's Plasmacluster is based on releasing ions to act on airborne substances, and Daikin's Streamer on breaking down dirt with discharge, and the measurement conditions are each company's own. Choosing on practical points such as applicable tatami count, whether you need humidifying or dehumidifying, quietness, and filter replacement cost leads to greater satisfaction than choosing on the merits of the technology.

How do overseas brands like Levoit differ from Japanese manufacturers?

The big differences are proprietary technology and support. Levoit mainly offers models that combine physical HEPA + activated carbon filters at an affordable price, and basically has no proprietary ion or discharge technology. Japanese manufacturers equip their units with Plasmacluster or Streamer, and parts supply and repair service tend to be more thorough. The choice comes down to this: if initial cost or a secondary unit is your priority, go with an overseas brand; if proprietary technology and thorough support are your priority, go with a Japanese one.

Which is better, a humidifying all-in-one or an "air purifier + humidifier"?

If you can change the water every day and regularly wash the tray and humidifying filter, an all-in-one saves space and is convenient. If you're not confident you can keep up the maintenance, an air purifier without humidification plus a separate humidifier is easier to keep clean, and if one breaks, you can still use the other. Choose according to how much effort you can put up with.

How do I decide when to replace the filter?

The replacement indicators on the unit's lamp or in the app are only a guideline based on operating time. They come sooner in homes with pets or smoking, so regardless of whether the indicator has come on, if you notice reduced cleaning ability, an unusual smell, or weaker airflow, inspect it. Holding it up to the light to see how clogged it is also works. The "10-year filter" is likewise a guideline that assumes standard use, so in very dirty environments consider replacing it earlier.

Is it okay to leave it on 24 hours a day?

Most models are designed for continuous operation, so most can be run all the time without trouble. A unit with sensors automatically drops to low speed when the air is clean, which keeps electricity costs down. However, power consumption varies greatly with the model and operating mode, so it is realistic to estimate long-term electricity costs based on the power consumption at quiet to standard settings.

Should I leave an air purifier on 24 hours a day?

Generally, running it continuously gives more stable results. An air purifier works by passing the room's air through it repeatedly to clean it little by little, so if you turn it off, the room returns to its original state in a few hours. Setting it to quiet or auto while you sleep or are out, and switching to strong only when dirt is being generated, such as when cooking or cleaning, is an easy way to balance power consumption and how it feels.

* This article is for reference only. Sale dates, point rates and campaign terms can change, so check each store's official page for the latest details.